1988 Mazda RX-7 Exhaust Parts
More 1988 Mazda RX-7 Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1988 Mazda RX-7, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1988 Mazda RX-7 Exhaust Parts
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.50004)
from
$156.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.338014)
from
$293.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 338014 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.337304)
from
$290.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 337304. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.80257)
from
$431.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – Exhaust 35385 Exhaust System Hanger Insulator (Part No.35385)
from
$4.99
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Hanger (Part No.255-659)
from
$2.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Walker – Exhaust 35119 Exhaust System Hanger Insulator (Part No.35119)
from
$9.49
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31313)
from
$3.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31311)
from
$3.29
Complete your exhaust repair with Walker∩┐╜ gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walkern++ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31367)
from
$5.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Mahle – Exhaust Gasket (Part No.H4000176633MAH)
from
$10.20
Exhaust Gasket
Walker – Exhaust 35574 Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker® accessories help to ensure effective exhaust repairs
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Popular 1988 Mazda RX-7 Exhaust Parts Categories
1988 Mazda RX-7 Exhaust Parts
You count on your 1988 Mazda RX-7 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 11 Exhaust Parts ranging in price from $3.29 to $431.99, you’re sure to find everything you need for your 1988 Mazda RX-7.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 4 different brands like Walker, Flowtech, and Magnaflow. 1988 Mazda RX-7 Exhaust Parts start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 34 extensive product reviews on 1988 Mazda RX-7 Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1988 Mazda RX-7 below to get started!
Top-Rated Exhaust Parts Brands For Your 1988 Mazda RX-7
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Mazda RX-7 running right for years to come. In our inventory you’ll find brands like Walker, Flowtech, Magnaflow, and even more.
Popular Mahle Exhaust Parts
You’ll find popular Mahle brand products across Catalytic Converters. All are waiting to get your 1988 Mazda RX-7 back on the road. Some of the top-rated Mahle products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1988 Mazda RX-7, and some of our most reviewed Walker parts include:
from
$3.29
(18)
2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials
Catalytic Converter Gaskets
from
$3.49
(1)
2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1988 Mazda RX-7 Exhaust Parts
What are the most purchased Exhaust Parts for the 1988 Mazda RX-7?
Out of 11 Exhaust Parts for the 1988 Mazda RX-7, the most popular in our inventory are:
from
$4.99
This product is not rated
Exhaust 35385 Exhaust System Hanger Insulator
Exhaust System Insulators
from
$126.99
This product is not rated
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
What are the top-rated 1988 Mazda RX-7 Exhaust Parts?
Top-rated Exhaust Parts for your 1988 Mazda RX-7 based on customer reviews/ratings are:
from
$97.99
(1)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
“MagnaFlow makes the best performance exhaust product’s on the market for the value.”
