1988 Mazda B2200 Towing Products
More 1988 Mazda B2200 Towing Products Categories
If you’re looking for an original Towing Products replacement for a 1988 Mazda B2200, you can search through our selection below. You’ll also find aftermarket and OEM Towing Products to meet your needs.
Essential 1988 Mazda B2200 Towing Products
Carquest Premium – Trailer Connector Kit (Part No.TCC1208)
from
$123.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Hopkins – Vehicle Wiring Kit (Part No.11143755)
from
$67.99
Vehicle Wiring Kit
Hopkins – 46255, Power Taillight Converter (Part No.46255)
from
$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.
Product Features:
See More
Product Features:
- For vehicles equipped with independent bulb turn signals or common bulb systems
- Protects tow vehicle electronics from wiring shorts
- Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
- Powers up to 5.0 amps per output
- Receives power directly from the battery
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$38.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – Connector (Part No.46365)
from
$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery
Product Features:
See More
Product Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics And Itself From Wiring Shorts
- Self-Resetting
- Includes 12 Ga. Power Lead Wire
- Includes Fuse/Fuse Assembly/Splices/Cable Ties
- Powers Up To 8.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.103992-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.114031)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.103991-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.124031)
from
$268.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
Popular 1988 Mazda B2200 Towing Products Categories
1988 Mazda B2200 Towing Products
You count on your 1988 Mazda B2200 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 11 Towing Products ranging in price from $18.79 to $279.99, you’re sure to find everything you need for your 1988 Mazda B2200.
Brands matter. If you want to shop a specific Towing Products brand, we stock 3 different brands like Hopkins, CARR, and Carquest Premium. 1988 Mazda B2200 Towing Products start as low as $18.79!
One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 16 extensive product reviews on 1988 Mazda B2200 Towing Products.
Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 1988 Mazda B2200 below to get started!
Top-Rated Towing Products Brands For Your 1988 Mazda B2200
Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Mazda B2200 running right for years to come. In our inventory you’ll find brands like Hopkins, CARR, Carquest Premium, and even more.
Popular Hopkins Towing Products
You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 1988 Mazda B2200 back on the road. Some of the top-rated Hopkins products in these categories are:
from
$38.99
(16)
46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)
Trailer Wiring Harness
FAQs for 1988 Mazda B2200 Towing Products
What are the most purchased Towing Products for the 1988 Mazda B2200?
Out of 11 Towing Products for the 1988 Mazda B2200, the most popular in our inventory are:
from
$76.99
This product is not rated
Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum
Trailer Hitch Steps
from
$268.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum
Trailer Hitch Steps
from
$279.99
This product is not rated
Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L
Trailer Hitch Steps
