1988 Lincoln Mark VII Differentials

Essential 1988 Lincoln Mark VII Differentials

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Powertrax – Lock Right Locker (Part No.1830-LR)

Lock Right Locker

from

$444.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

    Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

    from

    $8.99
    Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

    Product Features:
    • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
    See More

    Pro-King – Differential Internal Nest Kit (Part No.762B717A)

    Differential Internal Nest Kit

    from

    $99.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    National – Taper Bearing Cone (Part No.LM501349)

    Taper Bearing Cone

    from

    $17.99
    Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

    Product Features:
    • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
    • SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
    • OE-STYLE DESIGN — Engineered to meet OE specifications
    • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
    • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
    See More

    Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

    8.8" Ford Tracloc Clutch Set, Both Sides

    from

    $241.99
    8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

    Product Features:
    • Clutch kit
    • Fit Ford 8.8″ Trac Loc positraction
    See More

    Yukon Gear – Trac Loc Spring For Ford 7.5" (Part No.33514)

    Trac Loc Spring For Ford 7.5"

    from

    $67.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 in

    Product Features:
    • Trac Loc spring
    • Fits Ford 7.5″
    See More

    National – Shaft Repair Sleeve (Part No.99181)

    Shaft Repair Sleeve

    from

    $37.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

    Carrier Installation Kit For Ford 8.8" Differential

    from

    $134.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

    Product Features:
    • Fits Ford 8.8″
    • Includes carrier bearings and races and “super” carrier shim kit
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline (Part No.20069)

    Trac Loc Positraction, Ford 8.8", 31 Spline

    from

    $719.99
    Product Features:
    • Trac Loc positraction
    • Fits Ford 8.8″ with 31 spline axles
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $22.79


    Product Features:
    • FORD 9″ SOLID SPACER KIT
    See More

    Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)

    7.5" Ford Cover Gasket

    from

    $9.99
    7.5″ Ford cover gasket.

    Product Features:
    • Cover gasket
    • Fits Ford 7.5″
    See More

    Yukon Gear – Standard Open Carrier Case, Ford 8.8", 28 Spline (Part No.20076)

    Standard Open Carrier Case, Ford 8.8", 28 Spline

    from

    $379.99
    8.8″ 28 spline standard Open bare case (incl REVERSE) 3/4″ cross pin Hole.

    Product Features:
    • Standard open carrier case
    • Does not include spider gears
    • Fits Ford 8.8″ with 28 spline axles
    • 3/4″ cross pin bore
    See More

    USA Standard Gear – Master Overhaul Kit for the Ford 7.5 Differential (Part No.37027)

    Master Overhaul Kit for the Ford 7.5 Differential

    from

    $199.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits Ford 7.5″
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Yukon Gear – Positraction Internals For 8.8" Ford With 28 Spline Axles (Part No.16015)

    Positraction Internals For 8.8" Ford With 28 Spline Axles

    from

    $336.99
    Yukon positraction internals for 8.8″ Ford with 28 spline axles. This kit fits Yukon Gura Grip & Eaton positractions. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits Ford 8.8″ with Yukon Dura Grip positraction with 28 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

    Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

    from

    $6.99
    Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

    Product Features:
    • Side gear thrust washer for Ford 8.8″
    • 0.750″ diameter cross pin shaft applications only
    See More

    Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

    Pinion Install Kit For Ford 8.8" Differential

    from

    $167.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 2009 and down Ford 8.8″
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Powertrax – Grip LS Traction System (Part No.LS108831)

    Grip LS Traction System

    from

    $463.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – Steel Cover For Ford 8.8" (Part No.32328)

    Steel Cover For Ford 8.8"

    from

    $99.99
    Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.

    Product Features:
    • Fits Ford 8.8″
    • Steel
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Pro-King – Differential Cross Shaft (Part No.742G930)

    Differential Cross Shaft

    from

    $2.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

    Differential Gear Install Kit

    from

    $35.99


    Product Features:
    • MINI INSTALL KIT FORD 8.8
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55341)

    Differential Cover Gasket

    from

    $14.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-101)

    Ring And Pinion Bearing Installation Kit

    from

    $164.99
    This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

    Product Features:
    • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
    • Related repair – smart to have on hand when installing a differential ring and pinion
    • Durable construction – built for reliable longevity, free of defects in materials and workmanship
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1045-1)

    RngPnnInstlKt

    from

    $199.99
    RngPnnInstlKt

    1988 Lincoln Mark VII Differentials

    Maybe you’re in the middle of a full rebuild of that 1988 Lincoln Mark VII. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 194 different Differentials in our inventory ranging from $0.99 to $2,064.99. That means you can find the exact parts or products you need to keep that 1988 Lincoln Mark VII running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Lincoln Mark VII. Valvoline, Felpro, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1988 Lincoln Mark VII, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,534 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Differential Master Bearing Kit – Timken with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1988 Lincoln Mark VII rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1988 Lincoln Mark VII Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Lincoln Mark VII demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Mark VII the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Powertrax Differentials

    We carry Powertrax parts in our stock across Differential Open Unit and Components categories, plus more. For a 1988 Lincoln Mark VII, our most popular Powertrax Differentials include:
    Lock Right Locker
    from $444.99
    (1)
    Lock Right Locker
    Differential Open Unit and Components

    FAQs for 1988 Lincoln Mark VII Differentials

    What are the most purchased Differentials for the 1988 Lincoln Mark VII?

    Out of 194 Differentials for the 1988 Lincoln Mark VII, the most popular in our inventory are:
    Differential Cover Gasket
    from $14.99
    (121)
    Differential Cover Gasket
    Rear Housing Cover Gaskets
    Multi Purpose Seal
    from $11.99
    (28)
    Multi Purpose Seal
    Differential Pinion Seals
    Differential Shaft Lock Bolt
    from $5.99
    (11)
    Differential Shaft Lock Bolt
    Differential Pinion Shaft Lock Bolts

    What are the top-rated 1988 Lincoln Mark VII Differentials?

    Top-rated Differentials for your 1988 Lincoln Mark VII based on customer reviews/ratings are:
    Bearings
    from $15.99
    (9)
    Bearings
    “as advertised”
    Differential Master Bearing Kit - Timken
    from $137.99
    (8)
    Differential Master Bearing Kit – Timken
    “These Timken bearings work great in my 10 second drag car.”
    Bearings
    from $10.49
    (4)
    Bearings
    “Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”