1988 Jeep Wrangler Ball Joints
More 1988 Jeep Wrangler Ball Joints
Find your specific 1988 Jeep Wrangler original or aftermarket Ball Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Jeep Wrangler Ball Joints
Carquest Premium – Ball Joint (Part No.400-71287)
from
$67.99
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hardware included for easier installation (where applicable)
- Knurling improves retention between the control arm/knuckle and ball joint housing
Driveworks – Ball Joint (Part No.DW-K3137T)
from
$43.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Rare Parts – Ball Joint (Part No.RP13109)
from
$479.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Ball Joint Kit (Part No.RP12574)
from
$699.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Ball Joint (Part No.RP13623)
from
$231.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP71302)
from
$186.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Ball Joint (Part No.K100198)
from
$118.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Ball Joint (Part No.K7403)
from
$92.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Rare Parts – Ball Joint (Part No.RP71294)
from
$223.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
RT Offroad – Hd Ball Joint Set, Left Or Right, Upper & Lower, Heavy Duty Zero Lash (Part No.RT21002)
from
$122.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler, Jeep and Dodge. Our applications include Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Heavy Duty Replacement Of Factory Ball Joints
- Heavy Duty Sintered Metallic Bushings
- Greaseable Assembly
- Sold In Sets (Must Order two sets to complete one front axle)
Yukon Gear – Ball Joint Kit For Jeep JK 30 & 44 Front, One Side (Part No.33443)
from
$121.99
Product Features:
See More
- Ball joint kit for Jeep JK front
- Complete kit for upper and lower
- Services one side
Driveworks – Suspension Ball Joint Kit (Part No.DW-K7403)
from
$39.99
Suspension Ball Joint Kit
MOOG – Ball Joint (Part No.K3161T)
from
$67.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Crown Auto Jeep Replacmnt – Press In Style, Non Adjustable, Oem Replacement, With Hardware (Part No.83500202)
from
$79.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
MOOG – Ball Joint (Part No.K3137T)
from
$109.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Ball Joint (Part No.K3185)
from
$94.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Ball Joint (Part No.K3134T)
from
$84.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Spicer – Ball Joint Kit (Part No.L2021372135SPI)
from
$174.48
Ball Joint Kit
Omix – Ball Joint Kit (Part No.18038.02)
from
$42.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- 1 Lower With Hardware
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Ball Joint Kit (Part No.18036.02)
from
$119.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Includes The Upper And Lower Ball Joints
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Popular 1988 Jeep Wrangler Ball Joints Categories
1988 Jeep Wrangler Ball Joints
Maybe you’re in the middle of a full rebuild of that 1988 Jeep Wrangler. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 27 different Ball Joints in our inventory ranging from $39.99 to $792.99. That means you can find the exact parts or products you need to keep that 1988 Jeep Wrangler running smoothly.
Ball Joints are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Jeep Wrangler. Driveworks, Moog, and Crown Auto Jeep Replacmnt are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ball Joints for your 1988 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 715 reviews in this category, some of the top rated parts include Ball Joint with 1.5 stars and Ball Joint with 4.0 stars.
So if you’re in the market for aftermarket Ball Joints to keep your 1988 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ball Joints Brands To Make Your 1988 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Ball Joints brands and parts.
Popular MOOG Ball Joints
We carry MOOG parts in our stock across Suspension Ball Joint Kits categories, plus more. For a 1988 Jeep Wrangler, our most popular MOOG Ball Joints include:
FAQs for 1988 Jeep Wrangler Ball Joints
What are the most purchased Ball Joints for the 1988 Jeep Wrangler?
Out of 27 Ball Joints for the 1988 Jeep Wrangler, the most popular in our inventory are:
from
$79.99
This product is not rated
Press In Style, Non Adjustable, Oem Replacement, With Hardware
Suspension Ball Joint Kits
What are the top-rated 1988 Jeep Wrangler Ball Joints?
Top-rated Ball Joints for your 1988 Jeep Wrangler based on customer reviews/ratings are:
from
$43.99
(2)
Ball Joint
“This has a year warrantee because that’s as long as it will last. Dissappointed in this product.”
from
$49.49
(1)
Ball Joint
“jeep went the the 2016 houston tx flood, tie rods,ball joints, and wheel hubs all replaced, advance auto very helpful with getting the right parts”
