1988 Honda Prelude Steering and Chassis Parts

Essential 1988 Honda Prelude Steering and Chassis Parts

Powercraft – Power Steering Pump Seal Kit (Part No.8906)

Power Steering Pump Seal Kit

from

$49.49
Complete coverage for pumps, control valves, power cylinders, and steering gears in premium quality repair kits. All repair kits are supplied with detailed instruction sheets including exploded view illustrations and step by step service procedures where available.
See More

Rare Parts – Radius Arm Bushing (Part No.RP22465)

Radius Arm Bushing

from

$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • Improves vehicle handling
  • No Squeak
See More

Cardone – Rack and Pinion Assembly (Part No.26-1758)

Rack and Pinion Assembly

from

$246.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Driveworks – Ball Joint (Part No.DW-K90492)

Ball Joint

from

$13.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Dorman – Help – Power Steering Reservoir Cap (Part No.80983)

Power Steering Reservoir Cap

from

$8.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

Powercraft – Rack Valve Body Seal Kit (Part No.9072)

Rack Valve Body Seal Kit

from

$57.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Pressure Hose Assembly (Part No.37001)

Pressure Hose Assembly

from

$236.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.36891)

Pressure Hose Assembly

from

$328.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Driveworks – Ball Joint (Part No.DW-K9922)

Ball Joint

from

$15.99
Ball Joint

Driveworks – Ball Joint (Part No.DW-K9817)

Ball Joint

from

$16.99
Ball Joint

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – End Fitting Assembly (Part No.34968)

End Fitting Assembly

from

$22.29
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26841)

Rack & Pinion Bellows

from

$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

EMPI – Steering Rack Boot Kit (Part No.M1030143486EMP)

Steering Rack Boot Kit

from

$17.45
Steering Rack Boot Kit

Powercraft – Rack Pinion Seal Kit (Part No.9066)

Rack Pinion Seal Kit

from

$88.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8651)

Rack Pinion Seal Kit

from

$75.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Stabilizer Bar Link Kit (Part No.K90123)

Stabilizer Bar Link Kit

from

$12.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Incorporates proven design and engineering features
See More

Terada – Sway Bar Link Bushing (Part No.L1031152206TER)

Sway Bar Link Bushing

from

$1.90
The Terada Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

CTR – Tie Rod End (Part No.M3010150014CTR)

Tie Rod End

from

$38.07
CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.

Product Features:
  • Lower preload at assembly, less friction
  • No lubrication required in service
  • Less service wear
  • Longer service life
See More

Rare Parts – Tie Rod End (Part No.RP26568)

Tie Rod End

from

$39.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Karlyn – Sway Bar Link (Part No.L1030149727KAR)

Sway Bar Link

from

$26.57
The Karlyn Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Suspension Stabilizer Bar Link (Part No.K750272)

Suspension Stabilizer Bar Link

from

$36.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

1988 Honda Prelude Steering and Chassis Parts

You count on your 1988 Honda Prelude to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 48 Steering and Chassis Parts ranging in price from $1.90 to $246.99, you’re sure to find everything you need for your 1988 Honda Prelude.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 19 different brands like Imperial, Carquest Premium, and Cardone. 1988 Honda Prelude Steering and Chassis Parts start as low as $1.90!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,011 extensive product reviews on 1988 Honda Prelude Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 3.4 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1988 Honda Prelude below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1988 Honda Prelude

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Honda Prelude running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular TRW Steering and Chassis Parts

You’ll find popular TRW brand products across Ball Joints. All are waiting to get your 1988 Honda Prelude back on the road. Some of the top-rated TRW products in these categories are:
Ball Joint
from $40.94
(1)
Ball Joint
Lower Ball Joints

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1988 Honda Prelude, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1988 Honda Prelude Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1988 Honda Prelude?

Out of 48 Steering and Chassis Parts for the 1988 Honda Prelude, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated 1988 Honda Prelude Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1988 Honda Prelude based on customer reviews/ratings are:
Ball Joint
from $43.99
(27)
Ball Joint
“Reasonably priced.”
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
SWAY BAR LINK KIT 1 EA DRIVE
from $10.29
(5)
SWAY BAR LINK KIT 1 EA DRIVE
“Perfect fit”