1988 Ford F53 Belts and Hoses

Name: 1/2" x 12' Engine Oil Cooler Hose
Brand: Imperial
SKU: 240112
Price: 48.49 USD

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 1988 F53. Advance Auto Parts has popular F53 parts like Engine Cooling Hoses, Serpentine and V Belts, Pulleys and more. You’ll also find aftermarket and OEM Belts and Hoses for other F53 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1988 Ford F53 Belts and Hoses below and start saving instantly.

Popular 1988 Ford F53 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

Essential Belts and Hoses for 1988 Ford F53s

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$21.29

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$99.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time
Similar to SAE 20R3 Class D-3
Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$48.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$68.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$53.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$60.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$42.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$44.49

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$68.85

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
Provides resistance to the damaging effects of coolants, antifreeze and additives
Stands up to high pressures
Resists deterioration from heat, aging, ozone and underhood chemicals
Recommended by Ford Motor Company

from

$24.79

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$66.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$44.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$39.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$74.32

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$27.39

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$36.39

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$33.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$23.70

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$20.79

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$12.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$11.24

Heater Hose Connecto

Upgrade your 1988 Ford F53 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1988 Ford F53, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your F53 functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Belts and Hoses for the 1988 Ford F53, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1988 Ford F53 at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $87.99, with an average price of $35.09. Our 43 Belts and Hoses in stock come from 10 trusted brands, so you’re sure to find the right part for your 1988 Ford F53 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Ford F53, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, Dorman, and more. Litens Belts and Hoses start at just $33.49 and boast an impressive 5 stars average rating from customers. Dayco and Dorman also bring quality to the table, with Belts and Hoses available starting at $14.99, and at an average 5 stars rating. With 193 customer reviews and counting, our 1988 Ford F53 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1988 Ford F53 is always ready to roll. We’re committed to providing you with everything you need to keep your F53 in top shape, all in one place. Start shopping confidently below for your 1988 Ford F53!

Best-Selling Engine Cooling Hoses for 1988 Ford F53s

Enhance the driving experience in your Ford with 5 quality Engine Cooling Hose components, starting at $27.49.

show more show less

from

$42.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$46.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$27.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$62.96

ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$33.49

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Most Popular 1988 Ford F53 Serpentine and V Belts

Customize your Ford with 19 Serpentine and V Belts products like Serpentine Belts and V-Belts, all priced under $55.99.

show more show less

from

$39.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$27.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$46.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$25.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$22.79

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$24.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$45.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$38.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$27.57

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$55.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$18.99

Product Features:

Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
High-quality rubber compound protects the belt against heat, ozone and sunlight
Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
Meets RMA oil and heat resistant standards and static conductivity requirements
Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts

from

$49.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$49.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$47.44

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$36.87

Drive Belt

from

$36.39

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$31.99

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)

from

$30.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$27.78

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

Top Picks for 1988 Ford F53 Pulleys

Upgrade Ford F53s with top-quality Pulleys parts, including 5 OEM and aftermarket selections for your 1988 model.

show more show less

from

$33.49

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$20.79

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$21.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.49

ACDelco Gold (Professional) Accessory Drive Belt Idler Pulleys are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$32.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

In-Demand Belt Tensioners for 1988 Ford F53s

Select from 2 premium Belt Tensioners parts for your 1988 Ford F53, with prices ranging from $67.99 to $68.99.

show more show less

from

$68.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$67.99

This Litens aftermarket part is designed and engineered by Litens Automotive Group – the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Ford/Mercury’s original form, fit, and function specifications. For added durability, Litens has upgraded this tensioner to include a steel pulley .Note: Most other aftermarket tensioners for this application, have eliminated the O.E. specified internal damping feature which reduces torsional vibrations for a smoother, quieter running accessory system. Litens tensioners can be recognized by the internal round spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the world’s largest original equipment tensioner supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

Most Sold 1988 Ford F53 Heater Hoses

Explore our best-selling Ford parts for the 1988 F53 among 6 OEM and aftermarket options starting from $14.99.

show more show less

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$15.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$25.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$14.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$15.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$44.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 1988 Ford F53

Shop for the best-rated brands offering Belts and Hoses and other products for your 1988 Ford F53s. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Dorman, and more. Belts and Hoses from these brands that fit a 1988 F53 start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 1988 Ford F53 Belts and Hoses

When it comes to maintaining or upgrading your 1988 Ford F53, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 1988 Ford F53. With over 2 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.49, with an average price of just $50.74. Plus, with over 39 customer reviews and an average rating of 5 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$33.49

(39)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

“It works in conjunction with the BBC elt”

from
$67.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

Popular Dayco 1988 Ford F53 Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 1988 Ford F53 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1988 F53, Advance Auto Parts carries a full inventory of 12 Dayco Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dayco Belts and Hoses range from $20.79 to $68.99, plus, with more than 105 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$25.99

This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length

“”

from
$21.99

This product is not rated

Serpentine Idler/Tensioner Pulley; Polymer, 127mm Dia., 30.2mm Width, 6 Grooves

“”

from
$38.49

This product is not rated

Poly Rib Belt Serpentine Belt; 67.52 Long, 6 Rib Count

“”

FAQs for 1988 Ford F53 Belts and Hoses

Which Belts and Hoses are best-sellers for 1988 Ford F53s?

Out of 43 Belts and Hoses that fit 1988 Ford F53s, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $33.49
Heater Hose Connector (9110038) – $15.49
Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49

What’s the price range for 1988 Ford F53 Belts and Hoses?

Belts and Hose prices for the 1988 Ford F53 start at $2.49 and go up to $87.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1988 Ford F53?

The average price for Belts and Hoses for the 1988 Ford F53 is $35.09. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford F53 model years?

Yes, we currently carry Belts and Hoses for 31 model years of Ford F53s between 1989 and 2022. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 1988 Ford F53?

The cheapest 1988 Ford F53 Belts and Hoses we carry in stock are:

Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (10505007) – $3.99
Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (17190331) – $14.99
Heater Hose Connector (9110038) – $15.49
Heater Hose Connector (9110039) – $15.49

What are the top-rated Belts and Hoses that fit the 1988 Ford F53?

Out of 193 reviews by customers, our 1988 Ford F53 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1988 Ford F53 and their top-rated products:

Belt Tensioners
- Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (3670104) – $68.99
Radiator Hoses
- Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (3670104) – $68.99
Serpentine and V Belts
- Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (3670104) – $68.99

What types of Belts and Hoses do you sell for my 1988 Ford F53?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1988 Ford F53:

Can I get help with 1988 Ford F53 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford F53 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford F53 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Ford F53 Belts and Hoses

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Gates – Premium Molded Coolant Hose (Part No.21909)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.81" Diameter (Part No.E72634)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Dayco – Curved Radiator Hoses; EPDM Rubber, Standard Duty, 32.7 Inch Long, Exact Fit (Part No.E71986)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter (Part No.E71215)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89221)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89263)

Gates – Premium Molded Coolant Hose (Part No.23275)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.50" Long, 1.50" Diameter (Part No.E71318)

Gates – Premium Molded Heater Hose (Part No.18084)

Motorcraft – Motorcraft Heater Hose (Part No.R3030681272MTR)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 30.1mm Width, 6 Grooves (Part No.89051)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 8 Grooves (Part No.89053)

Dayco – Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count (Part No.5060990)

Dayco – Poly Rib Belt Serpentine Belt; 88.25 Long, 6 Rib Count (Part No.5060883)

Dayco – Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count (Part No.5060505)

Dayco – Poly Rib Serpentine Belt (Part No.W1000164151DAY)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000421505BAN)

Mitsuboshi – Drive V-Belt (Part No.W10001514278MBL)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221068DAY)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth (Part No.89001)

Dorman – Coolant Fitting (Part No.626-571)

Dorman – Heater Hose Connector (Part No.800-404)

Dorman – Heater Hose Connecto (Part No.R30361329114DOR)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.50" Long, 1.50" Diameter (Part No.E71318)

Gates – Premium Molded Coolant Hose (Part No.21505)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.5" Long, 1.50" Diameter (Part No.E72752)

ACDelco – Professional Molded Coolant Hose (Part No.G2000576786ACD)

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25530)

Dayco – Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count (Part No.5060505)

Driveworks – Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count (Part No.505K6)

Dayco – Poly Rib Belt Serpentine Belt; 68.5 Long, 6 Rib Count (Part No.5060685)

Driveworks – Poly Rib Belt Serpentine Belt; 67.52 Long, 6 Rib Count (Part No.675K6)

Dayco – Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count (Part No.5060495)

Driveworks – Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count (Part No.495K6)

Driveworks – Poly Rib Belt Serpentine Belt; 68.5 Long, 6 Rib Count (Part No.685K6)

Dayco – Poly Rib Belt Serpentine Belt; 67.52 Long, 6 Rib Count (Part No.5060675)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000423270BAN)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 69.125" Long, 6 Rib Count, Exact Fit (Part No.K060685HD)

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A59)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 68.05" Long, 6 Rib Count, Exact Fit (Part No.K060675HD)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 51" Long, 6 Rib Count, Exact Fit (Part No.K060505HD)

ContiTech – Drive V-Belt (Part No.W100057975CON)

Bando – Drive Belt (Part No.W10002440724BAN)

Mitsuboshi – Drive V-Belt (Part No.W10001514278MBL)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060505)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 50.172" Long, 6 Rib Count, Exact Fit (Part No.K060495HD)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000566031BAN)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth (Part No.89001)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 127mm Dia., 30.2mm Width, 6 Grooves (Part No.89013)

ACDelco – Serpentine Idler/Tensioner Pulley: Direct Fit, Steel, 88.9 mm Diameter (Part No.15-20676)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38001)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89221)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999001A)

Dorman – Heater Hose Connector (Part No.800-403)

Dorman – Heater Hose Connector (Part No.800-404)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.87616)

Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)

Dorman – Help – Heater Hose Connector – 5/8 In. Tube x 5/8 In. Hose (Part No.47165)

Gates – Premium Molded Heater Hose (Part No.18084)