1988 Ford Bronco Exhaust Parts

Name: Donut Exhaust Pipe Flange Gasket: Fiber with Steel, Heat Resistant, Premium Materials
Brand: Walker
SKU: 31400
Price: 3.29 USD

Below you will find various in-demand Ford Exhaust Parts, components and accessories for your 1988 Bronco. Advance Auto Parts has popular Bronco parts like Exhaust Mufflers, Exhaust Pipes, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Bronco model years including 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1988 Ford Bronco Exhaust Parts below and start saving instantly.

Popular 1988 Ford Bronco Exhaust Parts Categories

Exhaust Manifold Hardware Kits

Exhaust Manifold and Headers

Mufflers

Exhaust System Insulators

Catalytic Converters

Tail Pipes

Exhaust Manifold and Header Hardware

Catalytic Converter Gaskets

Exhaust Muffler Straps

Exhaust Hangers and Hardware

Exhaust Manifold Gaskets

Exhaust Clamps

Exhaust Chrome and Stainless Tips

Exhaust Heat Shields

Essential Exhaust Parts for 1988 Ford Broncos

from

$3.29

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$7.29

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$6.79

Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$224.99

Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$130.99

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94026 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:

Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
Compact, lightweight construction enables installation in confined areas, welding is required.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$13.29

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

Product Features:

Helps to protect external objects from the extreme heat of an exhaust system
Offered in a variety of styles and sizes for your installation needs
Designed to work seamlessly with OE and Walker aftermarket replacement parts
Constructed from durable and robust material for long life
Walker® supplies all of the accessories you need to do the complete exhaust job

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$40.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Designed and manufactured to meet the needs of the exhaust system repair environment.
Verified, tested and certified proprietary Organic coating resists corrosion.
Tightly controlled coefficient of friction ensures reliable installation.
Application specific kit contents
Self-locking nuts (where applicable).

from

$14.29

Walker provides the hardware and accessories to help finish the job faster and easier. Walker is a “one-stop” convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic, import and commercial vehicle applications.

Product Features:

Offered in a variety of styles and sizes for your installation needs
Ensures proper exhaust installation
Designed to work seamlessly with Walker aftermarket replacement parts
Constructed from durable and robust material for long life
Universal fit for installation flexibility

from

$85.99

Product Features:

Show Quality Chrome Platinum
Durable Black Finish
Can Be Welded Or Clamped
Complete The System
Glass-Packed Resonators

from

$514.99

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:

JBA Performance Exhaust 1627S 1 1/2″ Header Shorty Stainless Steel 87-95 Ford Truck 5.0L
Mandrel bent stainless steel tube

from

$454.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$62.99

Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.

from

$113.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$8.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$19.99

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.29

Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
Durable construction – made of quality materials for reliable service life
Quality assured – backed by a team of product engineers based in the United States

from

$102.99

Vibe-Lock Bolt

from

$60.29

Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:

Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
.051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
Provides excellent sealing and durability
Conforms to and seals minor surface irregularities
For high performance street, drag race, oval track and turbocharged (extreme heat) applications

from

$42.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

Reusable header, exhaust manifold and collector flange gaskets
Manufactured from “dead soft” aluminum layers – .125″ thick
Conforms easily to surface irregularities (warped flanges)
Compresses down to 0.060″ to create a tight leak-proof seal
Will not shrink, deteriorate, or blow out- eliminating gasket leaks
For high performance street, drag race and oval track use

from

$28.99

Product Features:

Designed To Match Port Openings Of Cylinder Heads
Excellent Free-Flowing Seal

from

$51.99

Seal-4-Good Header Flange Gasket

from

$6.49

Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:

whilst developing the exhaust system
BRExhaust also develops the installation hardware to the same standards.
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install
Perfect, gas-tight performance
Exhaust accessory that facilitates a complete installation process.
Built to OEM specifications

from

$1.99

Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$2.49

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$8.99

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

Upgrade your 1988 Ford Bronco with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1988 Ford Bronco, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Exhaust Parts are key to keeping your Bronco functioning at its best. At Advance Auto Parts, we offer a wide selection of 64 Exhaust Parts for the 1988 Ford Bronco, designed to meet your needs without breaking the bank. From Exhaust Muffler replacements to Exhaust Pipes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1988 Ford Bronco at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $999.99, with an average price of $188.19. Our 64 Exhaust Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1988 Ford Bronco without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Ford Bronco, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Walker, Dorman, and more. FELPRO Exhaust Parts start at just $18.29 and boast an impressive 5 stars average rating from customers. Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $1.99, and at an average 4 stars rating. With 357 customer reviews and counting, our 1988 Ford Bronco Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Ford Bronco is always ready to roll. We’re committed to providing you with everything you need to keep your Bronco in top shape, all in one place. Start shopping confidently below for your 1988 Ford Bronco!

Best-Selling Exhaust Mufflers for 1988 Ford Broncos

Enhance the driving experience in your Ford with 11 quality Exhaust Muffler components, starting at $62.99.

show more show less

from

$99.99

The original Flowmaster series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$163.99

Walker offers hundreds of muffler designs and styles to fit virtually any hard-working on/off road commercial vehicle. Walker is a “one-stop” convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic, import and commercial vehicle applications.

Product Features:

Manufactured from aluminized steel for durability
Designed to help ensure long service life
Engineered to reduce in-cab and exterior engine noise
Offered in a variety of styles, sizes and materials for your installation needs
An economical replacement for the original equipment part

from

$133.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$62.99

from

$76.99

Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$96.99

Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$126.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$79.99

RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life

from

$154.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$123.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$97.99

This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Top Picks for 1988 Ford Bronco Exhaust Hangers

Upgrade Ford Broncos with top-quality Exhaust Hangers parts, including 3 OEM and aftermarket selections for your 1988 model.

show more show less

from

$6.79

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$16.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.29

Offered in a variety of styles and sizes for your installation needs
Ensures proper exhaust installation
Designed to work seamlessly with Walker aftermarket replacement parts
Constructed from durable and robust material for long life
Universal fit for installation flexibility

In-Demand Exhaust Fittings for 1988 Ford Broncos

Select from 2 premium Exhaust Fittings parts for your 1988 Ford Bronco, with prices ranging from $1.99 to $2.49.

show more show less

from

$2.49

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$1.99

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from quality material for durability and long life
BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

Most Sold 1988 Ford Bronco Exhaust Manifold and Headers

Explore our best-selling Ford parts for the 1988 Bronco among 20 OEM and aftermarket options starting from $14.29.

show more show less

from

$24.99

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$121.99

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$87.99

Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

CUSTOMIZABLE FIT¿– Universal fit for installation flexibility
CUSTOMIZABLE FIT┐– Universal fit for installation flexibility
COMPATIBILITY — Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
QUALITY MATERIALS¿–¿Made from¿aluminum¿for durability and¿long life
QUALITY MATERIALS┐–┐Made from┐aluminum┐for durability and┐long life
Designed to work seamlessly with OE and Walker aftermarket replacement parts
New Walker« accessories help to ensure effective exhaust repairs
New Walker® accessories help to ensure effective exhaust repairs

from

$122.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$132.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$14.29

Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
Durable construction – made of quality materials for reliable service life
Quality assured – backed by a team of product engineers based in the United States

from

$149.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$19.99

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$299.99

Product Features:

Fuel Economy From The Engine
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware

from

$399.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$514.99

JBA Performance Exhaust 1627S 1 1/2″ Header Shorty Stainless Steel 87-95 Ford Truck 5.0L
Mandrel bent stainless steel tube

from

$102.99

Vibe-Lock Bolt

from

$714.99

JBA Performance Exhaust 1628SJT 1 1/2″ Header Shorty Stainless Steel 86-96 Ford Truck 5.8L Titanium Ceramic
Mandrel bent stainless steel tube

from

$699.99

JBA Performance Exhaust 1627SJS 1 1/2″ Header Shorty Stainless Steel 87-95 Ford Truck 5.0L Silver Ceramic
Mandrel bent stainless steel tube

from

$514.99

JBA Performance Exhaust 1628S 1 1/2″ Header Shorty Stainless Steel 86-96 Ford Truck 5.8L
Mandrel bent stainless steel tube

from

$588.99

JBA Performance Exhaust 1615SJS 1 1/2″ Header Shorty Stainless Steel Small Block Ford Block Hugger 289/302/351 Silver Ceramic
Mandrel bent stainless steel tube

from

$870.99

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$471.99

JBA Performance Exhaust 1615S 1 1/2″ Header Shorty Stainless Steel Small Block Ford Universal 289/302/351
Mandrel bent stainless steel tube

from

$138.30

More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:

Heat-shield may be included for protection of engine components where applicable
Cast iron or stainless tubular construction protects against warping or cracking
Leak-resistant for long-lasting performance
A rigorous quality inspection has been undertaken to ensure product standards

from

$23.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Designed and manufactured to meet the needs of the exhaust system repair environment.
Verified, tested and certified proprietary Organic coating resists corrosion.
Tightly controlled coefficient of friction ensures reliable installation.
Application specific kit contents
Self-locking nuts (where applicable).

Top-Rated Exhaust Parts Brands For Your 1988 Ford Bronco

Shop for the best-rated brands offering Exhaust Parts and other products for your 1988 Ford Broncos. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 1988 Bronco start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1988 Ford Bronco Exhaust Parts

When it comes to maintaining or upgrading your 1988 Ford Bronco, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1988 Ford Bronco. With over 4 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $28.57. Plus, with over 14 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$31.49

(11)

Exhaust Manifold Gasket Set

“Works as advertised.”

from
$23.49

This product is not rated

EXHAUST MANIFOLD BOLT SET

“”

from
$40.99

This product is not rated

Exhaust Manifold Hardware Kit

“”

Popular Walker 1988 Ford Bronco Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1988 Ford Bronco owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1988 Bronco, Advance Auto Parts carries a full inventory of 17 Walker Exhaust Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Walker Exhaust Parts range from $1.99 to $511.99, plus, with more than 84 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

from
$96.99

This product is not rated

SoundFX Muffler, Universal/ Fabrication Needed

“”

from
$7.29

This product is not rated

Exhaust Pipe Flange Gasket

“”

from
$13.29

This product is not rated

Exhaust Heat Shield

“”

FAQs for 1988 Ford Bronco Exhaust Parts

Which Exhaust Parts are best-sellers for 1988 Ford Broncos?

Out of 64 Exhaust Parts that fit 1988 Ford Broncos, the following parts are the top sellers:

Exhaust Manifold Gasket Set (5184398) – $31.49
Exhaust Manifold Hardware Kit – 3/8-16 In. (9110137) – $14.29
Direct Fit Exhaust Manifold: Without Heat Shield (19790003) – $122.99

What’s the price range for 1988 Ford Bronco Exhaust Parts?

Exhaust Part prices for the 1988 Ford Bronco start at $1.99 and go up to $999.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 1988 Ford Bronco?

The average price for Exhaust Parts for the 1988 Ford Bronco is $188.19. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Ford Bronco model years?

Yes, we currently carry Exhaust Parts for 30 model years of Ford Broncos between 1966 and 1996. Exhaust Parts are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1987.

What are the cheapest Exhaust Parts for my 1988 Ford Bronco?

The cheapest 1988 Ford Bronco Exhaust Parts we carry in stock are:

Exhaust Clamp (11012223) – $1.99
Exhaust Clamp (11012137) – $2.49
Exhaust 35460 Exhaust System Hanger Insulator (5601657) – $6.79
Exhaust Pipe Flange Gasket (5601304) – $7.29
Exhaust Heat Shield (18370491) – $13.29

What are the top-rated Exhaust Parts that fit the 1988 Ford Bronco?

Out of 357 reviews by customers, our 1988 Ford Bronco Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1988 Ford Bronco and their top-rated products:

Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $85.99
Exhaust Gaskets
- Terminator; Exhaust Tips (19310030) – $85.99

What types of Exhaust Parts do you sell for my 1988 Ford Bronco?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1988 Ford Bronco:

Can I get help with 1988 Ford Bronco Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Exhaust Parts and more.

What is your return policy for Ford Bronco Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Ford Bronco Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Ford Bronco Exhaust Parts

Walker – Donut Exhaust Pipe Flange Gasket: Fiber with Steel, Heat Resistant, Premium Materials (Part No.31400)

Walker – Exhaust Pipe Flange Gasket (Part No.31416)

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Walker – Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93238)

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94026)

Walker – Exhaust Heat Shield (Part No.35567)

Felpro – EXHAUST FLANGE BOLT & SPRING KIT (Part No.ES 72142)

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75115)

Walker – Exhaust 35564 Exhaust Muffler Strap (Part No.35564)

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

JBA Performance – 1627S 1 1/2" Header Shorty Stainless Steel 87-95 Ford Truck 5.0L (Part No.1627S)

Flowtech – Shorty; Smog Headers (Part No.91668FLT)

Walker – Sound Solution Muffler (Part No.18694)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Center Inlet 2.5in Dual Offset Outlet, 13in long, Aggressive Sound (Part No.9425472)

Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)

Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2.535 In. (Part No.03135)

Walker – Tail Pipe Aluminized 53.75" (Part No.45860)

Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 1-1/2 In. (Part No.03407)

Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03405)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7160)

Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7262)

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66014)

BRExhaust – Exhaust Clamp (Part No.250-058)

Walker – Exhaust Clamp (Part No.35335)

Walker – Exhaust Clamp (Part No.35336)

Walker – Exhaust Clamp (Part No.35337)

Flowmaster Inc. – 40 Series Muffler, 3in Center Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.430402)

Walker – Heavy Duty Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.22382)

Flowmaster Inc. – 40 Series Muffler, 3in Center Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.9430402)

Walker – Sound Solution Muffler (Part No.18694)

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18239)

Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18142)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18357)

Flowmaster Inc. – Delta 40 Muffler, 3in Center Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8430402)

Flowmaster Inc. – 40 Series Muffler, 3in Center Inlet 3in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.80430402)

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.100-5057)

Walker – Tail Pipe Aluminized 53.75" (Part No.45860)

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2.535 In. (Part No.03135)

Walker – Exhaust 35564 Exhaust Muffler Strap (Part No.35564)

Walker – Exhaust Clamp (Part No.35336)

Walker – Exhaust Clamp (Part No.35335)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03407B)

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-169)

Walker – Catalytic Converter Air Tube (Part No.35574)

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-153)

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-152)

Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03405)

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-165)

Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 1-1/2 In. (Part No.03407)

Flowtech – Standard Header (Part No.12504FLT)

Flowtech – High-Performance Shorty Headers with Ceramic Coating (Part No.91627FLT)

JBA Performance – 1627S 1 1/2" Header Shorty Stainless Steel 87-95 Ford Truck 5.0L (Part No.1627S)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

JBA Performance – 1628SJT 1 1/2" Header Shorty Stainless Steel 86-96 Ford Truck 5.8L Titanium Ceramic (Part No.1628SJT)

JBA Performance – 1627SJS 1 1/2" Header Shorty Stainless Steel 87-95 Ford Truck 5.0L Silver Ceramic (Part No.1627SJS)

JBA Performance – 1628S 1 1/2" Header Shorty Stainless Steel 86-96 Ford Truck 5.8L (Part No.1628S)

JBA Performance – 1615SJS 1 1/2" Header Shorty Stainless Steel Small Block Ford Block Hugger 289/302/351 Silver Ceramic (Part No.1615SJS)

Hooker Headers – Super Comp. Header (Part No.6823HKR)

JBA Performance – 1615S 1 1/2" Header Shorty Stainless Steel Small Block Ford Universal 289/302/351 (Part No.1615S)

Dorman – Exhaust Manifold Kit (Part No.H1000683338DOR)

Felpro – EXHAUST MANIFOLD BOLT SET (Part No.ES 75113)