1988 Chevrolet S10 Differentials

Essential 1988 Chevrolet S10 Differentials

Motive Gear – Differential Bearing Kit – Timken (Part No.R7.5GRT)

Differential Bearing Kit - Timken

from

$99.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM 7.5″,’82-98
See More

Yukon Gear – 7.2" Shifter Seal (Part No.30280)

7.2" Shifter Seal

from

$28.99
7.2″ shifter seal.Yukon Mighty seal.

Product Features:
  • Shifter seal
  • Fits GM 7.2″ IFS
See More

Yukon Gear – Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up (Part No.26017)

Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up

from

$889.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 7.5″ and 7.625″ with 26 spline axles
  • 3.23 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

USA Standard Gear – Master Overhaul Kit for the ’82-’99 GM 7.5" and 7.625" Differential (Part No.37049)

Master Overhaul Kit for the '82-'99 GM 7.5" and 7.625" Differential

from

$209.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 7.5" In A 3.08 Ratio (Part No.24476)

High Performance Ring & Pinion Gear Set For GM 7.5" In A 3.08 Ratio

from

$431.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 7.5″ and 7.6″
  • 7.50″ ring gear diameter
  • 27 spline pinion
  • 10 ring gear bolts
  • 3.08 ratio
See More

National – Multi Purpose Seal (Part No.710547)

Multi Purpose Seal

from

$25.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS

from

$32.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:
  • Side adjuster lock bolt
  • Fits GM 7.2″ IFS and 9.25″ IFS
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

USA Standard Gear – Standard Spider Gear Set For GM 7.5", 26 Spline (Part No.39023)

Standard Spider Gear Set For GM 7.5", 26 Spline

from

$156.99
Product Features:
  • Spider gear kit
  • Fits GM 7.5″ 26 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Carrier Installation Kit For GM 8.5" Differential With HD Bearings (Part No.57009)

Carrier Installation Kit For GM 8.5" Differential With HD Bearings

from

$148.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.5″ differential with HD bearings for large journal carrier. This kit contains carrier bearings, races and shims. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.

Product Features:
  • Fits GM 8.5″ with aftermarket positraction
  • Works with Heavy Duty Bearings
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Dorman – Differential Positive Unit Assembly (Part No.697-909)

Differential Positive Unit Assembly

from

$819.99
Hard use and poor lubrication can wear out a limited-slip differential. Restore original performance with this replacement differential carrier assembly that includes all-new spider gears, differential pins, clutches and carrier housing.

Product Features:
  • Direct replacement – this 30 spline limited-slip differential carrier fits in place of this vehicle’s original equipment carrier.
  • 100% new – this differential carrier uses all-new components, including spider gears, diff pin, pre-load spring pack and clutch pack.
  • Ready to install – this differential carrier is shipped pre-assembled and ready to install
  • Ideal upgrade – can be used to upgrade from open differential to limited-slip in an existing differential
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM7.5BI)

Differential Carrier Gear Kit

from

$115.99


Product Features:
  • INTERNAL KT GM 7.5 26 SPL
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-235)

Rear Axle Shaft Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Yukon Gear – Notched Cross Pin Shaft For 7.5" GM (Part No.33435)

Notched Cross Pin Shaft For 7.5" GM

from

$84.99
Notched cross pin shaft for 7.5″ GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:
  • Cross pin shaft
  • Fits GM 7.5″
  • Notched
  • Not compatible with Spartan Lockers or Lock Rights
See More

Pro-King – Differential Ring Gear Bolt (Part No.741B935)

Differential Ring Gear Bolt

from

$2.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Pro-King – Differential Internal Nest Kit (Part No.742G717B)

    Differential Internal Nest Kit

    from

    $191.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Pro-King – Crush Sleeve (Part No.741A034)

    Crush Sleeve

    from

    $3.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

    Pinion Install Kit For GM 8.5" Differential

    from

    $173.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 8.5″ rear
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Dorman – Rear Differential Cover (Part No.697-701)

    Rear Differential Cover

    from

    $20.99
    This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

    Product Features:
    • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
    • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
    • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
    • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
    See More

    National – Shaft Repair Sleeve (Part No.99225)

    Shaft Repair Sleeve

    from

    $28.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

    Posi Spring Kit For GM 7.5", With Preload Plates

    from

    $153.99
    Product Features:
    • Positraction spring kit
    • Fits GM 7.5″ and 7.625″ Dura Grip
    • Includes preload plates
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    1988 Chevrolet S10 Differentials

    Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet S10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 212 different Differentials in our inventory ranging from $1.99 to $1,839.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet S10 running smoothly.

    Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet S10. Valvoline, Driveworks, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1988 Chevrolet S10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 485 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 4.8 stars and Shaft Repair Sleeve with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1988 Chevrolet S10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1988 Chevrolet S10 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet S10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your S10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1988 Chevrolet S10, our most popular Felpro Differentials include:
    DIFFERENTIAL GASKET
    from $7.99
    (45)
    DIFFERENTIAL GASKET
    Rear Differential Cover Gaskets

    FAQs for 1988 Chevrolet S10 Differentials

    What are the most purchased Differentials for the 1988 Chevrolet S10?

    Out of 212 Differentials for the 1988 Chevrolet S10, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    Taper Bearing Set
    from $10.79
    (33)
    Taper Bearing Set
    Differential Bearings

    What are the top-rated 1988 Chevrolet S10 Differentials?

    Top-rated Differentials for your 1988 Chevrolet S10 based on customer reviews/ratings are:
    Differential Carrier Gear Kit
    from $159.99
    (6)
    Differential Carrier Gear Kit
    “perfick fit for 01 blazer !!!!”
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    “As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”
    Wheel Bearing and Seal Kit
    from $151.99
    (2)
    Wheel Bearing and Seal Kit
    “All you need to overhaul a diff, at a good price”