1988 Chevrolet S10 Blazer Exhaust Parts
More 1988 Chevrolet S10 Blazer Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1988 Chevrolet S10 Blazer, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1988 Chevrolet S10 Blazer Exhaust Parts
Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31523)
from
$12.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31522)
from
$16.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Walker Y Pipe (Part No.40310)
from
$81.99
Walker premium pre-bent pipe features 100% aluminized steel construction for durability And is manufactured with precision benders, And then fixture checked insuring a precise fit for quick And easy installation. Walker is a “one-stop” convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems And components for popular domestic, import And commercial vehicle applications.
See More
Walker – Exhaust 40212 Exhaust Y Pipe (Part No.40212)
from
$154.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 And 0.5 ID X .75 x OD 1.13 In. (Part No.03084)
from
$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Constructed of durable spring steel
- Rust and corrosion resistant
- Also available in a kit that include the Exhaust Manifold Bolt
- Easy installation
Dorman – Help – Exhaust Flange Spring – 0.825 In. OD x 1.135 In. ID x 1.570 In. Length (Part No.03081)
from
$6.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Constructed of durable spring steel
- Rust and corrosion resistant
- Also available in a kit that include the Exhaust Manifold Bolt
- Easy installation
Dorman – Double Ended Stud Kit – (3) Springs (3) Studs (3) Lock Nuts (Part No.675-216)
from
$12.99
This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.
Product Features:
See More
Product Features:
- Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
- Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
- Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
- Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
Dorman – Help – Manifold Stud and Spring Kit – M10-1.5 x 77mm (Part No.03107)
from
$10.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- New hardware helps fix exhaust leaks
- Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
- Also available separately (where applicable)
- Hardened steel construction for long-lasting durability
Walker – Exhaust 36463 Exhaust Bolt and Spring (Part No.36463)
from
$20.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION — Designed to be used for ball and socket joint
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90746)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95842)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Walker – Exhaust 35567 Exhaust Heat Shield (Part No.35567)
from
$18.49
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Helps to protect external objects from the extreme heat of an exhaust system
- Offered in a variety of styles and sizes for your installation needs
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- Constructed from durable and robust material for long life
- Walker® supplies all of the accessories you need to do the complete exhaust job
Walker – Exhaust 31882 Exhaust Flange. (Part No.31882)
from
$16.49
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- High quality material helps to ensure a leak-free connection
- New Walker® accessories help to ensure effective exhaust repairs
- Designed to work seamlessly with Walker aftermarket replacement parts
- Walker® supplies all of the accessories you need to do the complete exhaust job
Walker – Exhaust 31928 Exhaust Flange. (Part No.31928)
from
$11.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- High quality material helps to ensure a leak-free connection
- New Walker® accessories help to ensure effective exhaust repairs
- Designed to work seamlessly with Walker aftermarket replacement parts
- Walker® supplies all of the accessories you need to do the complete exhaust job
Walker – Exhaust 35564 Exhaust Muffler Strap (Part No.35564)
from
$16.49
Walker® provides the hardware and accessories to help finish the job faster and easier. Walker® is a “one-stop” convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic, import
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Ensures proper exhaust installation
- Designed to work seamlessly with Walker aftermarket replacement parts
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17222)
from
$91.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$119.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94009)
from
$119.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.3391419)
from
$1081.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 3391419. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1982-1993 Chevrolet S10, 1983-1988 Chevrolet S10 Blazer, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94006)
from
$119.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
JBA Performance – 1840S-3 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive (Part No.1840S-3)
from
$574.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1840S-3 1 1/2″ Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive
- Mandrel bent stainless steel tube
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-100)
from
$153.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-208)
from
$147.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Walker – Intermediate Pipe Aluminized 13.75" (Part No.41457)
from
$38.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 45" (Part No.44812)
from
$62.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Popular 1988 Chevrolet S10 Blazer Exhaust Parts Categories
1988 Chevrolet S10 Blazer Exhaust Parts
You count on your 1988 Chevrolet S10 Blazer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 57 Exhaust Parts ranging in price from $1.99 to $1,081.99, you’re sure to find everything you need for your 1988 Chevrolet S10 Blazer.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 9 different brands like Felpro, Walker, and Dorman. 1988 Chevrolet S10 Blazer Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 154 extensive product reviews on 1988 Chevrolet S10 Blazer Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 3.9 stars and Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed with 4.6 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1988 Chevrolet S10 Blazer below to get started!
Top-Rated Exhaust Parts Brands For Your 1988 Chevrolet S10 Blazer
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Chevrolet S10 Blazer running right for years to come. In our inventory you’ll find brands like Felpro, Walker, Dorman, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1988 Chevrolet S10 Blazer back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1988 Chevrolet S10 Blazer, and some of our most reviewed Walker parts include:
from
$16.99
(11)
Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
from
$379.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
FAQs for 1988 Chevrolet S10 Blazer Exhaust Parts
What are the most purchased Exhaust Parts for the 1988 Chevrolet S10 Blazer?
Out of 57 Exhaust Parts for the 1988 Chevrolet S10 Blazer, the most popular in our inventory are:
from
$12.99
This product is not rated
Double Ended Stud Kit – (3) Springs (3) Studs (3) Lock Nuts
Exhaust Manifold and Header Hardware
What are the top-rated 1988 Chevrolet S10 Blazer Exhaust Parts?
Top-rated Exhaust Parts for your 1988 Chevrolet S10 Blazer based on customer reviews/ratings are:
from
$119.99
(13)
Standard Grade Federal / EPA Compliant Universal Catalytic Converter
“Good fit great price”
from
$167.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
“Replaced stock converter and would use again.”
from
$16.49
(5)
Exhaust 35564 Exhaust Muffler Strap
“I really liked this clamp, it worked great for repairing the rusted oem clamp. I think ill by more to replace other clamps and keep a spare in my truc”
