1988 Chevrolet R30 Starter Parts

Essential 1988 Chevrolet R30 Starter Parts

Carquest Premium – Starter Brush (Part No.XAA1014)

Starter Brush

from

$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest – Starter Brush Set (Part No.X265)

Starter Brush Set

from

$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Starter Solenoid (Part No.84C1006)

Starter Solenoid

from

$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Starter Solenoid (Part No.S682)

Starter Solenoid

from

$31.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
  • The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Driveworks – Starter Solenoid (Part No.84105)

Starter Solenoid

from

$19.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – Starter Solenoid (Part No.SBC3223)

Starter Solenoid

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Starter Solenoid (Part No.84016)

Starter Solenoid

from

$26.49
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Professional – Starter-New (Part No.3510MSN)

Starter-New

from

$111.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10491
See More

ACDelco – Professional Starter, Remanufactured (Part No.F5000576280ACD)

Professional Starter, Remanufactured

from

$149.33
ACDelco’s Professional Remanufactured Starters are the ideal high quality replacement for many vehicles on the road today. ACDelco’s Professional Remanufactured Starters have 100% new copper and bronze sintered, oil-impregnated bushings, plus the solenoid contacts are 100% new with copper terminals and plated hardware. Remanufacturing starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These premium aftermarket reman starters are manufactured to fit a wide range of vehicles and will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:
  • Remanufactured using consistent quality processes; not just rebuilt
  • Starters have 100% new copper and bronze sintered and oil-impregnated armature bushings
  • Solenoid contacts are 100% NEW with copper terminals and plated hardware
  • Performance-tested and inspected to ensure they meet ACDelco quality design and component specifications
See More

Carquest HD Electrical – Starter: New, 12V, 9 Tooth (Part No.72-3510MN)

Starter: New, 12V, 9 Tooth

from

$193.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are prime

Product Features:
  • High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
See More

Carquest Premium – Starter Remanufactured (Part No.3510MS)

Starter Remanufactured

from

$76.99
Carquest Premium Starters and all components are thoroughly inspected and tested to meet or exceed O.E.M. specifications. Every remanufactured unit is 100% performance tested from component through final assembly, to ensure dependable service and reliable

Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
See More

ACDelco – GM Original Equipment Starter, Remanufactured (Part No.F5000167444ACD)

GM Original Equipment Starter, Remanufactured

from

$123.14
ACDelco GM Original Equipment Light Duty Remanufactured Starters are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. Remanufacturing Starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These original equipment starters are engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Contain 100% new copper and bronze sintered, oil-impregnated bushings
  • Solenoid contacts are 100% new with copper terminals and plated hardware
  • Remanufactured to meet or exceed original equipment specifications and are 100% performance-tested
  • Components are tested to meet original specification requirements, for remarkable durability
See More

Carquest – Starter Bushing (Part No.SB123)

Starter Bushing

from

$3.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Starter Bushing (Part No.SBA5144)

Starter Bushing

from

$2.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)

Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM

from

$7.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.

Product Features:
  • Conveniently available in various styles and in packs of different quantities
  • High quality steel construction
  • Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
  • Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
See More

Dorman – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (sold by each) (Part No.678-211)

Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (sold by each)

from

$4.99
Dorman’s Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.

Product Features:
  • Conveniently available in various styles and in packs of different quantities
  • High quality steel construction
  • Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
  • Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
See More

Carquest – Starter Drive (Part No.SD348)

Starter Drive

from

$90.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

1988 Chevrolet R30 Starter Parts

Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet R30. Maybe you just need a couple of Starter Parts. Either way, Advance Auto Parts has 23 different Starter Parts in our inventory ranging from $2.49 to $296.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet R30 running smoothly.

Starter Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet R30. Carquest, Carquest Premium, and Carquest Professional are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Starter Parts for your 1988 Chevrolet R30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,088 reviews in this category, some of the top rated parts include Starter Remanufactured Premium with 3.0 stars.

So if you’re in the market for aftermarket Starter Parts to keep your 1988 Chevrolet R30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Starter Parts Brands To Make Your 1988 Chevrolet R30 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet R30 demands trusted brand parts and products to keep it running. Many trusted brands of Starter Parts make up Advance Auto Parts’ inventory, and all are ready to help make your R30 the best it can be. Be sure to browse some of our top Starter Parts brands and parts.

Popular Carquest Professional Starter Parts

We carry Carquest Professional parts in our stock across Starters categories, plus more. For a 1988 Chevrolet R30, our most popular Carquest Professional Starter Parts include:
Starter-New
from $111.99
(38)
Starter-New
Starters
Starter-New
from $296.99
(4)
Starter-New
Starters

Top 1988 Chevrolet R30 Starter Parts from Carquest Standard

Carquest Standard products are another trusted brand when it comes to Starter Parts for your 1988 Chevrolet R30. Popular Carquest Standard parts include:
Starter Remanufactured Standard
from $62.99
(110)
Starter Remanufactured Standard
Starters

FAQs for 1988 Chevrolet R30 Starter Parts

What are the most purchased Starter Parts for the 1988 Chevrolet R30?

Out of 23 Starter Parts for the 1988 Chevrolet R30, the most popular in our inventory are:
Starter Remanufactured
from $76.99
(67)
Starter Remanufactured
Starters
Starter Solenoid
from $19.05
This product is not rated
Starter Solenoid
Starter Solenoids

What are the top-rated 1988 Chevrolet R30 Starter Parts?

Top-rated Starter Parts for your 1988 Chevrolet R30 based on customer reviews/ratings are:
Starter Remanufactured Premium
from $213.99
(2)
Starter Remanufactured Premium
“it fix just right”