1988 Chevrolet R30 Differentials

Name: DiffrlPinSupportBolt
Brand: Yukon Gear
SKU: 33582
Price: 5.99 USD

Find your specific 1988 Chevrolet R30 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1988 Chevrolet R30 Differentials

from

$5.99

DiffrlPinSupportBolt

from

$503.99

Ring/Pinion Sets

from

$27.99

Product Features:

Brand may vary by location

from

$13.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$99.99

Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:

Cross pin shaft
Fits GM 10.5″ 14 bolt truck

from

$10.99

14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

Product Features:

Ring gear bolt for GM 10.5″ 14 bolt truck
4.11 and down ratio
1/2″ x 18 thread
2.085″ overall length

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$249.99

Product Features:

Spider gear kit
Fit Dana Spicer 70 and 80 open differential with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$11.99

Product Features:

CRUSH SLEEVE 14 BOLT 10.5 3116

from

$362.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 1988 and down GM 10.5″ 14 bolt truck
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$14.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD

from

$526.99

Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits GM 10.5″ 14 bolt truck with 30 spline axles
4.10 and down ratio only or 4.56 and up thick gears
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$7.99

14T side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 10.5″ 14 bolt truck

from

$304.99

Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:

Clutch kit
Fits GM 10.5″ 14 bolt truck with Eaton positraction
Carbon fiber clutches

from

$289.99

Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

from

$135.99

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

AXLE SHAFT GM 10.5″ 30 SPL. 31 11/16″ L.H.

from

$37.99

14T GM pinion shim kit.

Product Features:

Pinion depth shims for GM 10.5″ 14 bolt truck

from

$205.99

Product Features:

GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$6.69

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$17.99

Product Features:

NUT PINION – 14 BOLT

from

$1099.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM 10.5″ 14 bolt truck
4.10 ratio and down only
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$39.02

Differential Bearing

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.99

14T pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits GM 10.5″ 14 bolt truck

Popular 1988 Chevrolet R30 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Spider and Pinion Gear Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet R30. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 154 different Differentials in our inventory ranging from $1.89 to $1,119.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet R30 running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet R30. National, Felpro, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1988 Chevrolet R30, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 636 reviews in this category, some of the top rated parts include Taper Bearing Set with 2.5 stars and Tapered Cone Wheel Bearing Assembly with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1988 Chevrolet R30 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1988 Chevrolet R30 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet R30 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your R30 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Bearings categories, plus more. For a 1988 Chevrolet R30, our most popular National Differentials include:

from $22.99

(12)

Bearings

Differential Bearings

from $16.99

(6)

Bearings

Differential Bearings

FAQs for 1988 Chevrolet R30 Differentials

What are the most purchased Differentials for the 1988 Chevrolet R30?

Out of 154 Differentials for the 1988 Chevrolet R30, the most popular in our inventory are:

from $6.79

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $38.49

(15)

Rear Differential Cover

Differential Covers

What are the top-rated 1988 Chevrolet R30 Differentials?

Top-rated Differentials for your 1988 Chevrolet R30 based on customer reviews/ratings are:

from $13.79

(4)

Taper Bearing Set

“Worked great on my 1981 Chevy C20”

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

“Worked sell”

from $15.99

(1)

Differential Cover Gasket

“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”

1988 Chevrolet R30 Differentials

More 1988 Chevrolet R30 Differentials

Essential 1988 Chevrolet R30 Differentials

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

USA Standard Gear – Ring/Pinion Sets (Part No.36344)

Driveworks – Tapered Roller Bearing (Part No.S-HM-903249)

Driveworks – Taper Bearing Set (Part No.S-A-38)

Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Motive Gear – Differential Crush Sleeve (Part No.3977355)

Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)

National – Bearings (Part No.HM88510)

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Motive Gear – Axle Shaft (Part No.MG1775)

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Motive Gear – Differential Carrier (Part No.6258340)

Felpro – Differential Cover Gasket (Part No.RDS 55063)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Pro-King – Pinion Seal (Part No.716A070)

Motive Gear – Differential Pinion Nut (Part No.15994582)

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

NTN – Differential Bearing (Part No.J7060741150NTN)

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

Popular 1988 Chevrolet R30 Differentials Categories