1988 Chevrolet Monte Carlo Performance Engines

Essential 1988 Chevrolet Monte Carlo Performance Engines

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60759)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$1014.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Cylinder Head Dowel Pins

from

$14.99
Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$99.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

from

$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Mr. Gasket – Engine Sealing (Part No.6560)

Engine Sealing

from

$499.99
Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.

Product Features:
  • Made of high temp silicone or nitrile blend rubber
  • Torque limiters to prevent over tightening
  • One piece molded rubber
  • Fits left and right hand dipsticks
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)

Water Pump for GM LS Victor Pro (Clockwise Rotation)

from

$524.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe

Product Features:
  • Standard Impeller Rotation
  • 0.750 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 6.00 in. Block To Hub Height
  • Natural Finish
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$64.19
These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:
  • They Are Zinc Dichromate Plated Steel
  • They Have Black Oxide Coated Set Screws
  • Keeps Rocker Arms Positively Locked
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Includes Locks and Hex Wrench
  • Shank O.D. .603″
See More

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST

from

$213.99
These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:
  • Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
  • For applications with less than 350 lbs. of open spring pressure
  • Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
  • Ultimate street roller rocker arm designed for serious performance enthusiasts
See More

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.72018)

Intake Manifold Gasket for 1958-1986 Small-Block Chevy

from

$244.99
Any gasket can create a seal, but a good gasket can do it with reduced clamping force and for a long period of time. Edelbrock gaskets are manufactured from extremely high-quality materials and are specifically designed to fit Edelbrock intakes and cylinder heads, so there’s no chance that they will interfere with component operation.

Product Features:
  • 10-Pack of 7201 Intake Gasket Sets
See More

Edelbrock – Intake Manifold Gasket for 1965-1990, Oval port 396-402-454 B/B Chevy (Part No.7203)

Intake Manifold Gasket for 1965-1990, Oval port 396-402-454 B/B Chevy

from

$32.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Edelbrock – Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal (Part No.6998)

Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal

from

$31.99
Edelbrock part #6998 Front Timing Cover Gasket set for Big-Block Chevy. Includes front cover gasket and front seal.

Product Features:
  • Includes replacement timing cover and water pump gaskets and the crank oil seal for big block Chevrolet engines
  • Features a tough, scuff-resistant silicone rubber coating
  • Helps in sealing without the engine warming up
  • Reduces fluid migration through the gasket
  • Resists fatigue
See More

Mr. Gasket – Timing Cover Seal (Part No.17)

Timing Cover Seal

from

$30.19
If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Made from Nitrile rubber.

Product Features:
  • Nitrile Rubber And High Density Cork
  • Will Not Shrink Or Stick
See More

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Torque Converter, Holeshot 2000

from

$544.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$789.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.1960)

Rear Main Seal Gasket

from

$23.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
  • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
  • Injection Molded for Precise Fit
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

PERFORMANCE REAR MAIN SEAL SET

from

$36.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Oil Pan Gasket (Part No.6561)

Ultra Seal: Oil Pan Gasket

from

$68.99
High performance, race quality gasket with molded rubber coating over a steel core. Steel core provides rigidity and durability, preventing prevent push out while the molded rubber coating helps seal minor oil pan rail irregularities. The one piece design eliminates the need for separate end seals to make installation easier and even further reduce the possibility of oil leakage. Provides excellent sealing and durability. Excellent replacement for stock original equipment, high performance street, drag race and oval track. Includes gasket and new oil pan bolts.

Product Features:
  • Steel core provides rigidity, durability and prevents gasket push out
  • Molded rubber coating seals minor irregularities in pan surface
  • One piece design is easier to install and even less prone to leak
  • Direct replacement suitable for all uses – street, racing, heavy duty
  • Include both gasket and new oil pan bolts
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Engine Valve Cover Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Pushrod Set for S/B Chevy

from

$187.99


Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Edelbrock – Pushrod Set for S/B Chevy (Part No.9646)

Pushrod Set for S/B Chevy

from

$203.99
Edelbrock part #9646 Pushrods are designed for small-block Chevy V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise forme

Product Features:
  • 7.25 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)

Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8

from

$253.99
Product Features:
  • Non-Rotator
  • 1.500 in. Outside Diameter
  • 1.082 in. Inside Diameter
  • 1.340 in. Coil Blind
  • Set of 16
See More

Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

VALVE SPRINGS, 1.310" BEEHIVE 1 ST

from

$594.99
With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Product Features:
  • Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
  • O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
  • Designed for hydraulic roller cams
  • .625″ maximum lift, 1.310″ O.D.
  • Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
See More

Edelbrock – Performer 454 T.B.I. Intake Manifold Big-Block Chevy (Part No.3764)

Performer 454 T.B.I. Intake Manifold Big-Block Chevy

from

$535.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal for 1987-90GM Trucks
  • Accepts Stock Throttle Body EFI and EGR
  • Match w/Camshaft PN[2162] and Head PN[60499]
  • Package improves 0-60 mph times by 1.70 seconds
See More

Edelbrock – Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish (Part No.2104)

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

from

$329.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

1988 Chevrolet Monte Carlo Performance Engines

Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet Monte Carlo. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 64 different Performance Engines in our inventory ranging from $14.99 to $1,028.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet Monte Carlo running smoothly.

Performance Engines are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet Monte Carlo. Mr. Gasket, FEL-PRO Performance, and Weiand are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1988 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 89 reviews in this category, some of the top rated parts include Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish with 5.0 stars and PERFORMANCE VALVE COVER GASKET SET with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1988 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1988 Chevrolet Monte Carlo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular FEL-PRO Performance Performance Engines

We carry FEL-PRO Performance parts in our stock across Performance Engine Cylinder Head Gaskets categories, plus more. For a 1988 Chevrolet Monte Carlo, our most popular FEL-PRO Performance Performance Engines include:
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Engine Valve Cover Gasket Set
from $23.49
(1)
Engine Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets

Top 1988 Chevrolet Monte Carlo Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1988 Chevrolet Monte Carlo. Popular Mr. Gasket parts include:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

FAQs for 1988 Chevrolet Monte Carlo Performance Engines

What are the most purchased Performance Engines for the 1988 Chevrolet Monte Carlo?

Out of 64 Performance Engines for the 1988 Chevrolet Monte Carlo, the most popular in our inventory are:
Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers
from $17.49
This product is not rated
Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers
Performance Intake Manifold Hardware
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
Performance Engine Water Pumps
Action Plus Water Pumps
from $215.99
(2)
Action Plus Water Pumps
Performance Engine Water Pumps

What are the top-rated 1988 Chevrolet Monte Carlo Performance Engines?

Top-rated Performance Engines for your 1988 Chevrolet Monte Carlo based on customer reviews/ratings are:
Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish
from $329.99
(1)
Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish
“product fit as described , no complaints”
PERFORMANCE VALVE COVER GASKET SET
from $23.49
(1)
PERFORMANCE VALVE COVER GASKET SET
“Great Quality Product”
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
from $151.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”