1988 Chevrolet K2500 Torque Converter and Related Products
More 1988 Chevrolet K2500 Torque Converter and Related Products
Find your specific 1988 Chevrolet K2500 original or aftermarket Torque Converter and Related Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Chevrolet K2500 Torque Converter and Related Products
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM92)
from
$179.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
B & M – Torque Converter, Nitrous Holeshot 2400 (Part No.20480)
from
$529.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- 2300-2500 RPM
- Small And Big Blocks
- Mild To Serious Performance
- Furnace Brazed
- Fully Balanced
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM35CW)
from
$173.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
B & M – TRAVELER CONVERTER (Part No.70431)
from
$789.99
Torque Converter – Traveler Converter with 2000 RPM Stall Speed APPLICATION: GM 4L80E The Traveler converter is intended for use in motorhomes, tow vehicles or other heavy duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. The Traveler is also stronger than a stock converter and has been internally modified to provide about 300 rpm more stall speed for help in initial acceleration without sacrificing normal highway operation. It is manufactured to B&M’s exacting tolerances for long life. Provides slightly higher stall speed than stock to improve pulling power at low speeds. Application: GM 4L80E Please download the attached 4L80E torque converter installation tips. New Precision pump drive tube Heavy duty needle bearings Furnace brazed New sprag and rollers in stator Pressure tested Fully balanced.
Product Features:
See More
Product Features:
- Ideal For Motor Homes
- Ideal For Towing Applications
- Precision Pump Drive Tube
- Heavy Duty Needle Bearings
- Furnace Brazed
- New Sprag and Rollers In Stator
- Pressure Tested
- Fully Balanced
B & M – Holeshot 3000 (Part No.20413)
from
$779.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$299.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM3)
from
$204.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4949)
from
$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Automatic Transmission Control Solenoid (Part No.S9820)
from
$41.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Automatic Transmission Control Solenoid (Part No.S9811)
from
$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4953)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)
from
$27.99
You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.
Product Features:
See More
Product Features:
- Super Strong, Rated At 200,000 PSI
- Kits Come With Hardened Parallel Ground Washers
- Made In USA
- 0.590″ Underhead Length
- M10 X 1.5 Thread Size
- Set of 6
Dorman – Electrical Harness – 3-Wire Transmission Converter Clutch (Part No.85182)
from
$19.99
This automatic transmission torque convertor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission torque connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1988 Chevrolet K2500 Torque Converter and Related Products Categories
1988 Chevrolet K2500 Torque Converter and Related Products
Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet K2500. Maybe you just need a couple of Torque Converter and Related Products. Either way, Advance Auto Parts has 25 different Torque Converter and Related Products in our inventory ranging from $19.99 to $1,150.00. That means you can find the exact parts or products you need to keep that 1988 Chevrolet K2500 running smoothly.
Torque Converter and Related Products are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet K2500. Pro-King, Carquest, and ARP Auto Racing are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Torque Converter and Related Products for your 1988 Chevrolet K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 25 reviews in this category, some of the top rated parts include Tork Master 3000 with 5.0 stars and Tork Master 2000: Value-Priced Street Performance Torque Converter with 1.0 stars.
So if you’re in the market for aftermarket Torque Converter and Related Products to keep your 1988 Chevrolet K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Torque Converter and Related Products Brands To Make Your 1988 Chevrolet K2500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Torque Converter and Related Products make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Torque Converter and Related Products brands and parts.
Popular Pro-King Torque Converter and Related Products
We carry Pro-King parts in our stock across Transmission Torque Converters categories, plus more. For a 1988 Chevrolet K2500, our most popular Pro-King Torque Converter and Related Products include:
from
$178.99
(3)
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$204.99
(2)
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$183.99
(2)
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
Top 1988 Chevrolet K2500 Torque Converter and Related Products from Pro-King
Pro-King products are another trusted brand when it comes to Torque Converter and Related Products for your 1988 Chevrolet K2500. Popular Pro-King parts include:
from
$173.99
(3)
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
FAQs for 1988 Chevrolet K2500 Torque Converter and Related Products
What are the most purchased Torque Converter and Related Products for the 1988 Chevrolet K2500?
Out of 25 Torque Converter and Related Products for the 1988 Chevrolet K2500, the most popular in our inventory are:
from
$37.05
This product is not rated
Automatic Transmission Control Solenoid
Automatic Transmission Torque Converter Clutch Solenoids
from
$203.99
This product is not rated
Automatic Transmission Remanufactured Torque Converter
Transmission Torque Converters
from
$27.99
This product is not rated
For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers
Torque Converter Bearings
What are the top-rated 1988 Chevrolet K2500 Torque Converter and Related Products?
Top-rated Torque Converter and Related Products for your 1988 Chevrolet K2500 based on customer reviews/ratings are:
from
$414.99
(1)
Tork Master 2000: Value-Priced Street Performance Torque Converter
“would not reccomend to anyone”
