1988 Chevrolet K2500 Bodies and Fender Parts

More 1988 Chevrolet K2500 Bodies and Fender Parts

Find your specific 1988 Chevrolet K2500 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1988 Chevrolet K2500 Bodies and Fender Parts

KAI – Roll Pan (Part No.EFXRP02)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan Without License Plate

Product Features:
  • Without License Plate
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Header Panel Bracket (Part No.GM2508101)

Header Panel Bracket

from

$129.99
New Standard Replacement Driver Side Headlight Bracket, With Quad Sealed Beam Headlights

Product Features:
  • With Quad Sealed Beam Headlights, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP3548)

Rocker Panel

from

$33.99
New Standard Replacement Passenger Side Rocker Panel, 2 Door Models, 45.5 X 4.5 X 3.25

Product Features:
  • 2 Door Models, 45.5 X 4.5 X 3.25, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Le Bra – Front End Cover (Part No.55494-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More
View Product

KAI – Floor Pan (Part No.RRP1255)

Floor Pan

from

$239.99
New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:
  • Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)

Nylon Shield Retainer- Ford and GM (sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

Putco – Stainless Steel Fender Trim (Part No.97102)

Stainless Steel Fender Trim

from

$208.99
Putco Fender Trim is the easiest way to create a custom look for your truck, SUV, or car. Designed for reliable durability and style, this trim features a stainless steel construction and installs directly to your truck without modification. Our fender trim in Stainless Steel and Black Platinum finish that combines the bright styling of chrome with the intensity of black for a uniquely deep finish. Pair them with any number of Putco trim pieces to create bold and dominating appearance.

Product Features:
  • Enhances The Look Of Your Vehicle For A True Custom Look
  • Made Of 304 Stainless Steel
  • Features UV Resistant Rubber Edge Trim For A Customized Fit
  • Complete The Chrome Look By Adding Mirror, Head Lamp, And Tail Light Covers
  • Easy To Install Using Stainless Steel Hardware
See More
View Product

KAI – Valance Panel (Part No.GM1090108V)

Valance Panel

from

$17.99
New Economy Replacement Front Valance, Without Sport Trim, Without Tow Hooks

Product Features:
  • Without Sport Trim, Without Tow Hooks, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dorman – Clip Nut – Wide Panel – No. 8 X 3/8 In, Panel Range .025 In – .125 In (sold by each) (Part No.700-520)

Clip Nut - Wide Panel - No. 8 X 3/8 In, Panel Range .025 In - .125 In (sold by each)

from

$0.71
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More
View Product

Dorman – Metal Clip Nut No.8 (Part No.961-304D)

Metal Clip Nut No.8

from

$4.49
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More
View Product

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More
View Product

Dorman – Body Mount Kit Radiator Support (Part No.924-010)

Body Mount Kit Radiator Support

from

$78.99
Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:
  • Direct replacement – this body mount fits and functions like the original equipment mount
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP144)

Wheel Arch Panel

from

$33.99
New Standard Replacement Passenger Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Wheel Arch Panel (Part No.RRP145)

Wheel Arch Panel

from

$33.99
New Standard Replacement Driver Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010005)

Dash Panel Overlay

from

$251.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010006)

Dash Panel Overlay

from

$284.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Westin – SG6 Running Boards (Part No.27-64735)

SG6 Running Boards

from

$512.99
Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:
  • Vehicle Specific Mount Kit Required; Sold Separately
  • Stylish Modern Design
  • 5 1/2 in. Step Surface Width
  • Corrosion Resistant Extruded Aluminum Board
  • Injection Molded End Caps
  • Slip Resistant Textured Step Surface
  • Rocker Panel Gap Strip Included For Finished Look
  • Optional Light Kit For End Caps PN[27-60000]
See More
View Product

Westin – Sure-Grip Running Boards (Part No.27-6140)

Sure-Grip Running Boards

from

$606.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:
  • Vehicle Specific Mount Kit Required; Sold Separately
  • Corrosion Resistant Extruded Aluminum Board
  • Slip Resistant Textured Step Surface
  • Injection Molded Polymer End Caps
  • Rocker Panel Gap Strip Included For Finished Look
  • Optional Light Kit Available PN[27-6000]
See More
View Product

KAI – Step Bumper Assembly (Part No.GM1101110V)

Step Bumper Assembly

from

$394.99
New Economy Replacement Rear Step Bumper Assembly, Black, Finish, Without Impact Strips, For Fleetside Models

Product Features:
  • Black, Finish, Without Impact Strips, For Fleetside Models, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Step Bumper Assembly (Part No.GM1101109PP)

Step Bumper Assembly

from

$694.99
New Premium Replacement Rear Step Bumper Assembly, Chrome, With Impact Strips, For Fleetside Models

Product Features:
  • Chrome, With Impact Strips, For Fleetside Models, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5020)

Premier 4 Oval Nerf Step Bars

from

$455.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:
  • Vehicle Specific Mounting Kit Required; Sold Separately
  • 4 in. Oval Tube
  • Injection Molded Polymer Step Pad
  • Molded Oval End Caps
  • Bolt-On Installation; No Drilling Required
  • Limited Lifetime Warranty
See More
View Product

Westin – E-Series 3 Round Nerf Step Bars (Part No.23-0505)

E-Series 3 Round Nerf Step Bars

from

$258.99
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:
  • Mount Kit Included
  • 3 in. Round Step Bars
  • Economical Step-Up Solution
  • Vehicle Specific Applications
  • Injection Molded Polymer Step Pad
  • Recessed Step Area
  • Bolt-On Installation; No Drilling Required
See More
View Product

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1125)

Premier Oval Nerf Step Bar Mount Kit

from

$174.99
Product Features:
  • Required Part For Oval Tubes
  • Vehicle Specific Mount Kit Insures Proper Fit
See More
View Product

ARIES – 6 Inch Oval Side Bar Mounting Brackets (Part No.4491)

6 Inch Oval Side Bar Mounting Brackets

from

$56.99
These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:
  • No-drill, vehicle-specific application for a custom fit
  • Compatible with 6″ oval track mounting system for easy, secure installation
  • Heavy-duty steel construction with a durable black powder coat finish
See More
View Product

KAI – Sheetmetal Sheet (Part No.RRP960)

Sheetmetal Sheet

from

$14.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More
View Product

1988 Chevrolet K2500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet K2500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 56 different Bodies and Fender Parts in our inventory ranging from $0.71 to $694.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet K2500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet K2500. Dorman, Energy Suspension, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1988 Chevrolet K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1988 Chevrolet K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1988 Chevrolet K2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Westin Bodies and Fender Parts

We carry Westin parts in our stock across Running Boards and Steps categories, plus more. For a 1988 Chevrolet K2500, our most popular Westin Bodies and Fender Parts include:
Running Board Mount Kit
from $153.99
(11)
Running Board Mount Kit
Running Boards and Steps

FAQs for 1988 Chevrolet K2500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1988 Chevrolet K2500?

Out of 56 Bodies and Fender Parts for the 1988 Chevrolet K2500, the most popular in our inventory are:
Metal Clip Nut No.8
from $4.49
This product is not rated
Metal Clip Nut No.8
Body Side Molding Clips
Body Mount Kit Radiator Support
from $78.99
This product is not rated
Body Mount Kit Radiator Support
Body Mounts
Body Cab Mount Set
from $147.99
This product is not rated
Body Cab Mount Set
Body Mounts