1988 Chevrolet C2500 Bodies and Fender Parts

More 1988 Chevrolet C2500 Bodies and Fender Parts

Find your specific 1988 Chevrolet C2500 original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1988 Chevrolet C2500 Bodies and Fender Parts

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 51"Length (Part No.DZ16301)

Powder Coated, Black, Aluminum, Unlighted, Mounting Kit Required, 51"Length

from

$362.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Full Length Protective Accent Trim
  • Slip Resistant Raised Rubber Grommets On The Step Area
  • NRT(TM) Powder Coated Steel Braces
  • Mounting Braces Not Included
  • Widened 6 Inch Step Area
  • No Drilling Required
See More
View Product

KAI – Dash Panel Overlay (Part No.DCV010006)

Dash Panel Overlay

from

$284.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Husky Liners – Front Or Rear Mud Guards (Part No.56221)

Front Or Rear Mud Guards

from

$76.99
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that’s as tough as nails (or rocks for that matter). They’re easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.

Product Features:
  • Black
  • Made in the USA
  • Built to the maximum width for full tread coverage of single or dually factory tires.
  • Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
  • Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle’s paint.
See More

(1 reviews)
View Product

Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5025)

Premier 4 Oval Nerf Step Bars

from

$309.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:
  • Vehicle Specific Mounting Kit Required; Sold Separately
  • 4 in. Oval Tube
  • Injection Molded Polymer Step Pad
  • Molded Oval End Caps
  • Bolt-On Installation; No Drilling Required
  • 3 Year Warranty
See More
View Product

ARIES – 6 Inch Oval Side Bar Mounting Brackets (Part No.4491)

6 Inch Oval Side Bar Mounting Brackets

from

$56.99
These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:
  • No-drill, vehicle-specific application for a custom fit
  • Compatible with 6″ oval track mounting system for easy, secure installation
  • Heavy-duty steel construction with a durable black powder coat finish
See More
View Product

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1125)

Premier Oval Nerf Step Bar Mount Kit

from

$174.99
Product Features:
  • Required Part For Oval Tubes
  • Vehicle Specific Mount Kit Insures Proper Fit
See More
View Product

KAI – Rocker Panel (Part No.RRP3790)

Rocker Panel

from

$97.99
New Standard Replacement Passenger Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Rocker Panel (Part No.RRP3789)

Rocker Panel

from

$92.99
New Standard Replacement Driver Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Header Panel Bracket (Part No.GM2508101)

Header Panel Bracket

from

$129.99
New Standard Replacement Driver Side Headlight Bracket, With Quad Sealed Beam Headlights

Product Features:
  • With Quad Sealed Beam Headlights, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More
View Product

Le Bra – Front End Cover (Part No.55220-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More
View Product

Le Bra – Front End Cover (Part No.55494-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More
View Product

KAI – Sheetmetal Sheet (Part No.RRP960)

Sheetmetal Sheet

from

$14.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More
View Product

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

Chrysler, GM Panel Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

Energy Suspension – Body Cab Mount Set (Part No.3.4122R)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

Energy Suspension – Chevy Pickup Body Mount Set for Improved Ride and Durability (Part No.3.4123R)

Chevy Pickup Body Mount Set for Improved Ride and Durability

from

$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More
View Product

KAI – Floor Pan (Part No.RRP1250)

Floor Pan

from

$64.99
New Standard Replacement Passenger Side Cab Floor Panel, 15 1/2 X 30

Product Features:
  • 15 1/2 X 30, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1255)

Floor Pan

from

$239.99
New Standard Replacement Driver Side Complete Cab Floor Section, Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2

Product Features:
  • Inner And Outer With Backing Plate, 26 1/2 X 23 X 7 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Floor Pan (Part No.RRP1251)

Floor Pan

from

$69.99
New Standard Replacement Driver Side Cab Floor Panel, 18 5/8 X 29 1/8

Product Features:
  • 18 5/8 X 29 1/8, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dorman – Panel Trim Retainer – Interior – GM/Chrysler/AMC (Part No.45490)

Panel Trim Retainer - Interior - GM/Chrysler/AMC

from

$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

(1 reviews)
View Product

Dorman – Nylon Shield Retainer (Part No.963-230)

Nylon Shield Retainer

from

$2.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

KAI – Valance Panel (Part No.GM1090108C)

Valance Panel

from

$33.99
New CAPA Certified Standard Replacement Front Valance, Without Sport Trim, Without Tow Hooks

Product Features:
  • Without Sport Trim, Without Tow Hooks, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Valance Panel (Part No.GM1090108V)

Valance Panel

from

$17.99
New Economy Replacement Front Valance, Without Sport Trim, Without Tow Hooks

Product Features:
  • Without Sport Trim, Without Tow Hooks, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

1988 Chevrolet C2500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet C2500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 55 different Bodies and Fender Parts in our inventory ranging from $1.79 to $661.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet C2500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet C2500. Dorman, KAI, and Energy Suspension are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1988 Chevrolet C2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1988 Chevrolet C2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1988 Chevrolet C2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet C2500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C2500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Husky Liners Bodies and Fender Parts

We carry Husky Liners parts in our stock across Splash Guard (Mud Flap) categories, plus more. For a 1988 Chevrolet C2500, our most popular Husky Liners Bodies and Fender Parts include:
Front Or Rear Mud Guards
from $76.99
(1)
Front Or Rear Mud Guards
Splash Guard (Mud Flap)

Top 1988 Chevrolet C2500 Bodies and Fender Parts from Westin

Westin products are another trusted brand when it comes to Bodies and Fender Parts for your 1988 Chevrolet C2500. Popular Westin parts include:
Running Board Mount Kit
from $153.99
(11)
Running Board Mount Kit
Running Boards and Steps

FAQs for 1988 Chevrolet C2500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1988 Chevrolet C2500?

Out of 55 Bodies and Fender Parts for the 1988 Chevrolet C2500, the most popular in our inventory are:
Chrysler, GM Panel Retainer
from $4.49
This product is not rated
Chrysler, GM Panel Retainer
Splash Shield Retainers
Body Mount Kit Radiator Support
from $78.99
This product is not rated
Body Mount Kit Radiator Support
Body Mounts
Panel Trim Retainer - Interior - GM/Chrysler/AMC
from $1.79
(1)
Panel Trim Retainer – Interior – GM/Chrysler/AMC
Rocker Panel Molding Retainers