1988 Chevrolet Blazer Differential Axle Shafts

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

• Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
• Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
• Durable construction – designed to rigorous standards and tested to ensure performance
• Trustworthy solution – backed by team of engineers and quality control specialists in the United States

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

• Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
• Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
• Durable construction – designed to rigorous standards and tested to ensure performance
• Trustworthy solution – backed by team of engineers and quality control specialists in the United States

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

• GM 10BL 8.5 AXLE LEFT SIDE, 77-87

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

• GM 10BL 8.5 AXLE RIGHT SIDE, 77-87 1/2 & 3/4 TON

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

• AXLE SHAFT 8.5 4X4 28 SPL 6 LUG 31 1/2 OA EARLY 88 DOWN

FRONT AXLE SHAFT

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

• GM ’73-87 SHAFT OUTER 1/2 & 3/4 TON 19SP-JEEP ’74-92 W/ DISK BRAKES

Product Features:

• 30 spline inner and 19 spline outer
• Fits GM 8.5″ in 1979-1987 GM 1/2 ton
• Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Yukon front 4340 Chrome-Moly axle kit for ’79-’87 GM 8.5″ 1/2 ton truck and Blazer with 30 splines and Yukon Superjoints. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Yukon Superjoints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 30 spline inner and 19 spline outer
• Fits GM 8.5″ in 1979-1987 GM 1/2 ton
• Includes inner and outer 4340 Chromoly axles and Yukon Super Joints

Yukon front 4340 Chrome-Moly axle kit for ’79-’87 GM 8.5″ 1/2 ton truck and Blazer with 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Spicer universal joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 30 spline inner and 19 spline outer
• Fits GM 8.5″ in 1979-1987 GM 1/2 ton
• Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

Product Features:

• 30 spline inner and 19 spline outer
• Fits GM 8.5″ in 1979-1987 GM 1/2 ton
• Includes inner and outer 4340 Chromoly axles and Spicer U-Joints

Yukon 1541H right hand inner axle for ’79 and newer 8.5″ GM truck and Blazer with a length of 19.15 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.

Product Features:

• 30 spline
• 19.15″ long
• Fits GM 8.5″ in 1988-1991 GM 1/2 ton truck
• Left hand inner
• 5-760X U-joint size

Yukon 1541H inner axle for ’78 and newer 8.5″ GM with a length of 35.5 inches and with 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:

• 28 spline
• 35.5″ long
• Fits GM 8.5″ in 1979-1991 GM 1/2 ton
• Left hand inner
• 5-760X U-joint size

Yukon 1541H left hand inner axle for ’79 and newer 8.5″ GM truck and Blazer with a length of 35.46 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.

Product Features:

• 30 spline
• 35.46″ long
• Fits GM 8.5″ in 1988-1991 GM 1/2 ton truck
• Left hand inner
• 5-760X U-joint size

Yukon 1541H alloy rear axle for ’88-’91 8.5″ GM 4WD 1559 truck with a length of 31-1/2″ inches and 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

• Fits 1988-1991 GM 8.5″ truck with 4 wheel drive
• 30 spline
• 31 1/2″ long
• 6 lug

Yukon 1541H alloy rear axle for ’80-’90 8.5″ GM 4WD truck with a length of 31-1/2″ inches and 28 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

• Fits 1980-1990 GM 8.5″ truck with 4 wheel drive
• 28 spline
• 31 1/2″ long
• 6 lug

Yukon 4340 Chrome-Moly right hand inner axle for ’79 and newer GM 8.5″ Blazer and truck with a length of 19.15″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 30 spline
• 19.15″ long
• Fits GM 8.5″ in 1979 and up GM 1/2 ton
• Right hand inner
• 5-760X U-joint size
• 4340 Chromoly

Yukon 4340 Chrome-Moly left hand inner axle for ’79 and newer GM 8.5″ Blazer and truck with a length of 35.46″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• 30 spline
• 35.46″ long
• Fits GM 8.5″ in 1979 and up GM 1/2 ton
• Left hand inner
• 5-760X U-joint size
• 4340 Chromoly

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

• High strength steel
• Dual heat treating process

35.46″ 30Spline INNER Left hand 8.5″ 79 & UP GM Truck & BLAZER .

Product Features:

• 30 spline
• 35.46″ long
• Fits Dana Spicer 44 in 1988-1991 GM
• Left hand inner
• 5-760X U-joint size
• 4340 Chromoly

USA Standard axle shaft for ’80-’90 4WD GM truck. 31 1/2″, 28 spline.

Product Features:

• Fits 1980-1990 GM 8.5″ truck with 4 wheel drive
• 28 spline
• 31 1/2″ long
• 6 lug

19.15″ 30spline inner Right hand 8.5″ 79 & up GM truck & Blazer (4340).

Product Features:

• 30 spline
• 19.15″ long
• Fits Dana Spicer 44 in 1988-1991 GM
• Right hand inner
• 5-760X U-joint size
• 4340 Chromoly

The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:

• AXLE SHAFT 10 BOLT SM BRG 4 31 1/2″ OA ’88-91; L/R=8.5/8.6 30SP