1988 Chevrolet Astro Drivetrains

Essential 1988 Chevrolet Astro Drivetrains

USA Standard Gear – Pinion Installation Kit For ’82-’99 GM 7.5" & 7.625" (Part No.60010)

Pinion Installation Kit For '82-'99 GM 7.5" & 7.625"

from

$153.99
7.5″ & 7.625″ GM 82-99 PINION KIT .

Product Features:
  • Fits 1982-1999 GM 7.5″ and 7.625″
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

National – Bearings (Part No.LM67048)

Bearings

from

$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-RP513067)

Wheel Bearing: Direct Fit, 1 Piece

from

$37.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

ACDelco – Differential Pinion (Part No.J7020209161ACD)

Differential Pinion

from

$106.88
Differential Pinion

Motive Gear – Differential Pinion Seal (Part No.8610)

Differential Pinion Seal

from

$3.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

1350 To 1410 Conversion U/Joint

from

$78.99
Yukon 1350 to 1410 conversion u/joint.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2012
  • Weight approx: 1 Lbs
  • CUSHION INSERT ONLY
  • FOR COMPLETE MOUNT SEE PART 6056
See More

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each)

from

$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)

Spindle Washer - I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each)

from

$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Richmond Gear – MiniSpool (Part No.78-7528-1)

MiniSpool

from

$151.99
MiniSpool

Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

Universal Joint Strap Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 355, 372 & 534G
  • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – 7.5 GM Cover Gasket (Part No.23018)

7.5 GM Cover Gasket

from

$11.99
7.5 GM cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 7.5″ and 7.625″
See More

Yukon Gear – Notched Cross Pin Shaft For 7.5" GM (Part No.33435)

Notched Cross Pin Shaft For 7.5" GM

from

$84.99
Notched cross pin shaft for 7.5″ GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:
  • Cross pin shaft
  • Fits GM 7.5″
  • Notched
  • Not compatible with Spartan Lockers or Lock Rights
See More

Yukon Gear – Axle Bearing & Seal Kit For Astro Van Rear (Part No.10038)

Axle Bearing & Seal Kit For Astro Van Rear

from

$146.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit, TorringtonBrand, 2.445″ OD, for ’02 and older Astro and Safari. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for 2002 and older Astro van
  • Includes axle bearing and seal
  • Services one side
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Yukon Gear – Standard Open Pinion Gear And Thrust Washer For 7.2" GM (Part No.33376)

Standard Open Pinion Gear And Thrust Washer For 7.2" GM

from

$7.99
Standard open pinion gear thrust washer for 7.2″ GM.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 7.2″ IFS
See More

Yukon Gear – Bearing Install Kit For ’98 And Newer GM S10 And S15 IFS Differential (Part No.11060)

Bearing Install Kit For '98 And Newer GM S10 And S15 IFS Differential

from

$369.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 1998 and up GM 7.2″ IFS
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)

U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM

from

$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

Product Features:
  • u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
See More

ACDelco – Trans Case Input Sft (Part No.J7110341646ACD)

Trans Case Input Sft

from

$107.03
Trans Case Input Sft

Powertrax – No-Slip Traction System (Part No.9207853005)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Pro-King – Differential Internal Nest Kit (Part No.741B717)

    Differential Internal Nest Kit

    from

    $223.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9355)

    Front Drive Shaft: Greasable, Direct Replacement

    from

    $407.99
    CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

    Product Features:
    • Built to match O.E. form, fit and function.
    • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
    • All slip yokes are lubricated to prevent premature wear.
    • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
    See More

    Popular 1988 Chevrolet Astro Drivetrains Categories

    1988 Chevrolet Astro Drivetrains

    You count on your 1988 Chevrolet Astro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 190 Drivetrains ranging in price from $1.99 to $1,014.99, you’re sure to find everything you need for your 1988 Chevrolet Astro.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, Valvoline, and Driveworks. 1988 Chevrolet Astro Drivetrains start as low as $1.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,128 extensive product reviews on 1988 Chevrolet Astro Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Greaseable Super Strength Universal Joint with 3.8 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1988 Chevrolet Astro below to get started!

    Top-Rated Drivetrains Brands For Your 1988 Chevrolet Astro

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Chevrolet Astro running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

    Popular Felpro Drivetrains

    You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1988 Chevrolet Astro back on the road. Some of the top-rated Felpro products in these categories are:
    DIFFERENTIAL GASKET
    from $7.99
    (45)
    DIFFERENTIAL GASKET
    Rear Differential Cover Gaskets

    FAQs for 1988 Chevrolet Astro Drivetrains

    What are the most purchased Drivetrains for the 1988 Chevrolet Astro?

    Out of 190 Drivetrains for the 1988 Chevrolet Astro, the most popular in our inventory are:
    Greaseable Premium Universal Joint
    from $26.99
    (89)
    Greaseable Premium Universal Joint
    U-Joints
    Taper Bearing Set
    from $10.29
    (38)
    Taper Bearing Set
    Differential Bearings
    Universal Joint
    from $15.99
    (52)
    Universal Joint
    U-Joints

    What are the top-rated 1988 Chevrolet Astro Drivetrains?

    Top-rated Drivetrains for your 1988 Chevrolet Astro based on customer reviews/ratings are:
    Greaseable Super Strength Universal Joint
    from $34.99
    (48)
    Greaseable Super Strength Universal Joint
    “Moog and advanced auto got me out of a bad situation with an amazing part ( u”
    Greaseable Super Strength Universal Joint
    from $36.99
    (41)
    Greaseable Super Strength Universal Joint
    “Easy install and great way to have sting durability with access to grease points”
    Bearings
    from $16.99
    (39)
    Bearings
    “Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”