1988 BMW M3 Fuel and Emissions Systems
More 1988 BMW M3 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1988 BMW M3, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1988 BMW M3 Fuel and Emissions Systems
Spectra Premium – Fuel Tank (Part No.BM1B)
from
$464.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7285)
from
$134.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Carquest Premium – Multi Purpose Relay (Part No.RAA1749)
from
$36.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
DENSO – First Time Fit Oxygen Sensor (Part No.C5010374945ND)
from
$135.00
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Delphi – Electric Fuel Pump: With Hose Clamps & Piece, Isolator, Seals, Terminal Hardware (Part No.FE0039)
from
$74.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1402)
from
$239.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Vemo – Relay (Part No.P2020309952VMO)
from
$25.88
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Bosch – Relay (Part No.P2020939442BOS)
from
$17.95
Relay
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Bosch – Fuel Injector Seal (Part No.C101016838BOS)
from
$2.05
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More
Bosch – Bosch Fuel Pressure Regulator (Part No.C3000241274BOS)
from
$38.41
An essential part of the Fuel System, the Fuel Pressure Regulators’ sole purpose is to maintain fuel pressure at a constant differential to manifold vacuum under all engine load conditions.
Product Features:
See More
Product Features:
- Corrosion resistant housing material
- Premium diaphragm materials for longer service life
- Internal precision components maintain stable fuel pressure and ensure adequate fuel return
- Meets or exceeds OEM specifications
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1035)
from
$135.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Febi-Bilstein – Fuel Tank (Gas) Cap (Part No.E201066969FEB)
from
$30.29
Febi Fuel Tank Caps are manufactured to meet OE quality, and performance for reliable operation.
Product Features:
See More
Product Features:
- Meets OE vehicle standards
- Factory type retaining strap for user convenience
- OE quality seal ensures fuel tank emissions are maintained preventing check engine warnings.
Rein – Cap-Fuel (Part No.CPF0031)
Carquest Premium – Fuel Injection Relay (Part No.RAA2717)
from
$46.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA1834)
from
$15.79
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Elring – Fuel Injector O-Ring (Part No.C1012316492ELR)
from
$5.82
Fuel Injector O-Ring
Bosch – Fuel Injector Seal (Part No.C1010406080BOS)
from
$6.08
Fuel Injector Seal
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Elring – Fuel Injector Seal (Part No.C1010681908ELR)
from
$2.43
Fuel Injector Seal
Bosch – MAP Sensor (Part No.C704435966BOS)
from
$534.66
Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.
Product Features:
See More
Product Features:
- Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
- Bosch continually improves its MAP sensor designs with the latest chip technology.
- Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)
Popular 1988 BMW M3 Fuel and Emissions Systems Categories
1988 BMW M3 Fuel and Emissions Systems
You count on your 1988 BMW M3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 31 Fuel and Emissions Systems ranging in price from $2.05 to $534.66, you’re sure to find everything you need for your 1988 BMW M3.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Delphi, Carquest Premium, and AC Delco. 1988 BMW M3 Fuel and Emissions Systems start as low as $2.05!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1988 BMW M3 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1988 BMW M3 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1988 BMW M3
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 BMW M3 running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, AC Delco, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Fuel Pumps and Gas Caps. All are waiting to get your 1988 BMW M3 back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1988 BMW M3 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1988 BMW M3?
Out of 31 Fuel and Emissions Systems for the 1988 BMW M3, the most popular in our inventory are:
from
$12.99
This product is not rated
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings
Fuel Injector Seal Kits
