1988 Audi 80 Quattro Steering and Chassis Parts
More 1988 Audi 80 Quattro Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1988 Audi 80 Quattro, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1988 Audi 80 Quattro Steering and Chassis Parts
Rare Parts – Tie Rod Assembly (Part No.RP26640)
from
$115.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Delphi – Ball Joint (Part No.L202026349DEL)
from
$22.75
Delphi ball joints adhere to global OE technical requirements and undergo testing focused on strength and durability performance, safety critical tests for a safer driving experience. The ball joint push out test measures the force required to push out / remove the ball-pin from the housing. It is an important safety check to help ensure the part can withstand forces applied to the vehicle suspension system in real road conditions. The ball joint pull out test measures the force required to pull the ball-pin out from the housing. If the force required to remove the ball-pin is below the OE spec, there is a risk the joint could fail during normal driving conditions causing the vehicle to lose directional control. Additionally, Delphi’s new dust cover design features an improved Chloroprene Rubber (CR) formula that helps maintain its durability even in extreme temperatures, helping to protect the internal components and support the continued free movement of the ball joint.
Product Features:
See More
Product Features:
- One of the industry leading ranges with global application coverage.
- Designed, engineered and manufactured to OE quality standards based on more than 100 years of experience in the design and manufacture of OE steering systems.
- First To Market parts (for vehicles still covered by manufacturers warranty)
Rare Parts – Tie Rod End (Part No.RP26638)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Powercraft – Pump Seal Kit (Part No.8841)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
GKN Drivetech – Driveshaft CV Joint (Part No.K108026948LOB)
from
$114.11
The GKN Drivetech Driveshaft CV Joint is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability
- Lighter weight provides improved fuel efficiency
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Cardone – Power Steering Pump (Part No.21-5893)
from
$164.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Dorman – Suspension Control Arm (Part No.526-993)
from
$141.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
International Suspension Group – Sway Bar Bushing (Part No.L105082395ISG)
from
$3.22
Sway Bar Bushing
Powercraft – Rack Pinion Seal Kit (Part No.8756)
from
$276.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Pressure Hose Assembly (Part No.39942)
from
$84.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.39935)
from
$178.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Whiteline – Sway Bar Link Bushing (Part No.W21014)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
National – Multi Purpose Seal (Part No.222820)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 1988 Audi 80 Quattro Steering and Chassis Parts Categories
1988 Audi 80 Quattro Steering and Chassis Parts
You count on your 1988 Audi 80 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 19 Steering and Chassis Parts ranging in price from $3.22 to $276.99, you’re sure to find everything you need for your 1988 Audi 80 Quattro.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Cardone, Driveworks, and Edelmann. 1988 Audi 80 Quattro Steering and Chassis Parts start as low as $3.22!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 62 extensive product reviews on 1988 Audi 80 Quattro Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1988 Audi 80 Quattro below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1988 Audi 80 Quattro
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Audi 80 Quattro running right for years to come. In our inventory you’ll find brands like Cardone, Driveworks, Edelmann, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1988 Audi 80 Quattro back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1988 Audi 80 Quattro Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1988 Audi 80 Quattro?
Out of 19 Steering and Chassis Parts for the 1988 Audi 80 Quattro, the most popular in our inventory are:
from
$31.49
This product is not rated
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles
Power Steering Filters
