1987 Western Star 4800 Belts and Hoses

Essential 1987 Western Star 4800 Belts and Hoses

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch) (Part No.77250GL)

Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch)

from

$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter (Part No.21135)

Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter

from

$52.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2.50" Diameter (Part No.B71812)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2.50" Diameter

from

$21.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Green Stripe½ Heavy-Duty Vibraflex½ Hump Hose (Part No.23575)

Green Stripe½ Heavy-Duty Vibraflex½ Hump Hose

from

$49.49
Product Features:
  • Oil and heat-resistant Nitrile tube
  • Oil, abrasion and heat-resistant Neoprene cover
  • Two-ply fabric reinforced
  • Exceeds SAE J20 (Class B Tube and Class C Cover)
  • Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C)
  • Caution: Do not use for gasoline or diesel transfer applications
See More

Gates – Silicone Straight Heater Hose (Part No.26244)

Silicone Straight Heater Hose

from

$24.99
Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.

Product Features:
  • High flexibility for versatile applications
  • High environmental resistance to weathering, coolant deterioration and ozone
  • Suitable for emission hose applications
  • Polyester textile cord reinforcement for high durability
  • Approved for marine applications
  • Exceeds SAE 20R3 Class A Tube and Cover
  • Temperature Range: -70 Deg. F to +400 Deg. F (-57 Deg. C to +204 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.21488)

Premium Molded Coolant Hose

from

$28.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24220)

Green Stripe« 2-Ply Straight Coolant Hose

from

$1.49
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24236)

Green Stripe« 2-Ply Straight Coolant Hose

from

$3.79
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9400)

Automotive XL« High Capacity V-Belt

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Double Cog V-Belt; 64.5 Inch Long, Exact Fit Premium Quality (Part No.22645)

Double Cog V-Belt; 64.5 Inch Long, Exact Fit Premium Quality

from

$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and pro

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9545HD)

FleetRunner« Heavy-Duty V-Belt

from

$48.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Driveworks – Automotive V-Belt (Part No.63017)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – FLEETRUNNER BELTS (Part No.9650HD)

FLEETRUNNER BELTS

from

$47.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Heavy-Duty construction resists cracking and wear
  • Oil and heat resistant
  • Outperforms the competition on the most troublesome drives
  • Patented EPDM construction with distinct green gum back
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9650)

Automotive XL« High Capacity V-Belt

from

$35.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.50517)

Automotive V-Belt, Driveworks

from

$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9400HD)

FleetRunner« Heavy-Duty V-Belt

from

$40.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9560HD)

FleetRunner« Heavy-Duty V-Belt

from

$36.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9630HD)

FleetRunner« Heavy-Duty V-Belt

from

$46.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – V-Ribbed Serpentine Belt: 68.05" Long, 10 Rib Count, Exact Fit (Part No.K100675)

V-Ribbed Serpentine Belt: 68.05" Long, 10 Rib Count, Exact Fit

from

$66.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 105.51 Long, 8 Rib Count, Heavy Duty (Part No.5081055)

Poly Rib Belt HD Serpentine Belt; 105.51 Long, 8 Rib Count, Heavy Duty

from

$94.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 79.034" Long, 8 Rib Count, Exact Fit (Part No.K080785HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 79.034" Long, 8 Rib Count, Exact Fit

from

$99.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 81 Long, 10 Rib Count, Heavy Duty (Part No.5100810)

Poly Rib Belt HD Serpentine Belt; 81 Long, 10 Rib Count, Heavy Duty

from

$76.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 106.125" Long, 8 Rib Count, Exact Fit (Part No.K081055HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 106.125" Long, 8 Rib Count, Exact Fit

from

$86.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 35.625" Long, 5 Rib Count, Exact Fit (Part No.K050350HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 35.625" Long, 5 Rib Count, Exact Fit

from

$35.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K040445HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$32.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 44.125" Long, 6 Rib Count, Exact Fit (Part No.K060435HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 44.125" Long, 6 Rib Count, Exact Fit

from

$45.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed Serpentine Belt: 76.439" Long, 8 Rib Count, Exact Fit (Part No.K080760)

V-Ribbed Serpentine Belt: 76.439" Long, 8 Rib Count, Exact Fit

from

$61.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 76.11 Long, 8 Rib Count, Heavy Duty (Part No.5080760)

Poly Rib Belt HD Serpentine Belt; 76.11 Long, 8 Rib Count, Heavy Duty

from

$50.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

1987 Western Star 4800 Belts and Hoses

You count on your 1987 Western Star 4800 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 94 Belts and Hoses ranging in price from $2.99 to $76.99, you’re sure to find everything you need for your 1987 Western Star 4800.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 3 different brands like Dayco, Driveworks, and Gates. 1987 Western Star 4800 Belts and Hoses start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 331 extensive product reviews on 1987 Western Star 4800 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Automotive V-Belt with 5.0 stars and V-Belt, Top Cog with 4.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1987 Western Star 4800 below to get started!

Top-Rated Belts and Hoses Brands For Your 1987 Western Star 4800

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Western Star 4800 running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Gates, and even more.

Popular Driveworks Belts and Hoses

You’ll find popular Driveworks brand products across Serpentine and V Belts. All are waiting to get your 1987 Western Star 4800 back on the road. Some of the top-rated Driveworks products in these categories are:
Automotive V-Belt, Driveworks
from $5.29
(3)
Automotive V-Belt, Driveworks
V-Belts
Automotive V-Belt
from $5.29
(1)
Automotive V-Belt
V-Belts

FAQs for 1987 Western Star 4800 Belts and Hoses

What are the most purchased Belts and Hoses for the 1987 Western Star 4800?

Out of 94 Belts and Hoses for the 1987 Western Star 4800, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count
from $21.99
(16)
Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 1987 Western Star 4800 Belts and Hoses?

Top-rated Belts and Hoses for your 1987 Western Star 4800 based on customer reviews/ratings are:
Automotive V-Belt
from $5.49
(2)
Automotive V-Belt
“Good”
V-Belt, Top Cog
from $14.29
(2)
V-Belt, Top Cog
“looks ok have not put it on yet”
Green Stripe« Truck & Bus Series V-Belt
from $52.99
(2)
Green Stripe« Truck & Bus Series V-Belt
“It went in a teenager’s car. Works great.”