1987 Pontiac Grand Prix Fuel and Emissions Systems

Name: Multi-Use Connector
Brand: Carquest Premium
SKU: PTA1437
Price: 19.99 USD

Below you will find various in-demand Pontiac Fuel and Emissions Systems, components and accessories for your 1987 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Fuel Injectors, Air Flow Sensors, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Grand Prix model years including 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 1987 Pontiac Grand Prix Fuel and Emissions Systems below and start saving instantly.

Popular 1987 Pontiac Grand Prix Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

MAP-Barometric Pressures

Smog Pumps

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Ambient Air Temperature Sensor Connectors

Fuel Pump Mounts

Air Charge Temperature Sensors

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Tank Lock Rings

Fuel Injector Connectors

Fuel Tank Sending Units

Fuel Pump Pushrods

Fuel Pump Tank Seals

Pressure Dampers

Idle Air Control Valve Connectors

EGR Valve Gaskets

Ambient Air Temperature Sensor Clip

Ported Vacuum Switches

Fuel Cap Tester Adapters

Diverter Valve Connectors

Idle Speed Control Motor Connectors

Fuel Injection Pressure Regulator Connector

Essential Fuel and Emissions Systems for 1987 Pontiac Grand Prixes

from

$19.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$27.99

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$5.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$115.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$82.99

Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:

Meets or exceeds OE specifications for fit, form and function
All sending units are 100% performance tested
Includes installation gaskets or seals where applicable

from

$45.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.99

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$21.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$31.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$198.99

GM Genuine Parts Secondary Air Injection Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The secondary air system injects air into your vehicle’s downstream exhaust system to assist in minimizing emissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps maintain controlled air flow to proper air injection components
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$27.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
External core made from oriented silicon steel ensures durability and longevity

from

$809.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Application specific design ensure a perfect fit guarantee
OEM, fit, form and function paired with todays fuel injection technology
Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (ISO 9002)
Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks

from

$37.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$30.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$31.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$56.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$420.99

Application specific design ensure a perfect fit guarantee
OEM, fit, form and function paired with todays fuel injection technology
Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (ISO 9002)
Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks

from

$39.99

ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$67.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$19.49

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$0.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$243.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$28.99

Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:

Made From Premium Grade Aerospace Chrome Moly
Center Less Ground To Precise Diameter
Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
Provide With Required Reliability And Improved Performance

from

$16.99

GM Genuine Parts Fuel Pump Strainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These strainers help keep debris from entering your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps keep debris from entering fuel pump
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$59.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

Upgrade your 1987 Pontiac Grand Prix with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1987 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 93 Fuel and Emissions Systems for the 1987 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Air Flow Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1987 Pontiac Grand Prix at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $420.99, with an average price of $59.27. Our 93 Fuel and Emissions Systems in stock come from 18 trusted brands, so you’re sure to find the right part for your 1987 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Pontiac Grand Prix, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium, Dorman, Delphi, and more. Carquest Premium Fuel and Emissions Systems start at just $11.99 and boast an impressive 4.4 stars average rating from customers. Dorman and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $7.29, and at an average 4.2 stars rating. With 4,800 customer reviews and counting, our 1987 Pontiac Grand Prix Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 1987 Pontiac Grand Prix!

Best-Selling Fuel Injectors for 1987 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 6 quality Fuel Injector components, starting at $12.99.

show more show less

from

$59.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$27.99

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
External core made from oriented silicon steel ensures durability and longevity

from

$43.99

Pigtail connector allows replacement of damaged fuel injector connector.

from

$42.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$12.99

CARQUEST premium gasket kit includes necessary gasket and seals to reseal both single and dual style throttle body fuel injector(s). Includes injector o-rings and steel back up rings. Includes single and dual throttle body housing gasket and fuel port gasket.

Most Popular 1987 Pontiac Grand Prix Air Flow Sensors

Customize your Pontiac with 10 Air Flow Sensors products like MAP-Barometric Pressures, Air Charge Temperature Sensors, and Manifold Air Pressure Sensors, all priced under $115.99.

show more show less

from

$65.05

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$67.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$25.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$115.99

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$94.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$63.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$63.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$85.99

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

Top Picks for 1987 Pontiac Grand Prix Oxygen Sensors

Upgrade Pontiac Grand Prixes with top-quality Oxygen Sensors parts, including 3 OEM and aftermarket selections for your 1987 model.

show more show less

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$39.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$32.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

In-Demand Gas Caps for 1987 Pontiac Grand Prixes

Select from 13 premium Gas Caps parts for your 1987 Pontiac Grand Prix, with prices ranging from $7.99 to $24.99.

show more show less

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Sold 1987 Pontiac Grand Prix Fuel Pumps

Explore our best-selling Pontiac parts for the 1987 Grand Prix among 20 OEM and aftermarket options starting from $13.49.

show more show less

from

$15.49

Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:

Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles
Ideal solution – this rod is a reliable replacement for an original part that has failed
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$79.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$27.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$13.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$161.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT
Inlet/Outlet Tapped For 3/8 in. NPT

from

$177.99

Product Features:

Unique Valve Design
Improves Flow Quantity/Quality
Supports Engines Up To 550 HP
Hi-Vol 0.375 in. NPT Inlet/Outlet
Produces 6 psi
Gasoline Or Mixed Fuels Only

from

$36.49

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$72.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$52.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$13.49

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$56.99

New Platinum Pro Electric Fuel Pump, Digital Dash, New Strainer Required For Warranty

Product Features:

Digital Dash
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$13.99

Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength
Properly Aligned
Conventional Hex Heads
Rust-Proof Stainless Bolts
170,000 PSI

from

$181.99

High Output Fuel Flow
Flows 130 gph Free Flow
Shutoff Pressure Pre-Set From 7.5 To 9 PSI
Fuel Pressure Regulator Required Recommend P/N 12-704
Heavy Duty Construction For Continuous High rpm Operation
Redesigned High Flow Valves Ensure Adequate Fuel Delivery
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT

from

$18.99

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:

Chrome Plated Steel
Comes With Gasket

from

$420.99

Application specific design ensure a perfect fit guarantee
OEM, fit, form and function paired with todays fuel injection technology
Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
Proudly manufactured in Canada under stringent quality systems (ISO 9002)
Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks

from

$183.99

High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:

Hi-Vol 0.5 in. NPT Inlet/Outlet
Large Alcohol-Proof Diaphragm
Aircraft-Type Allen Bolts
Produces 10 psi
For Gasoline Only
Finest Quality Material
Beautifully Detailed
Use w/Fuel Pressure Regulator PN[8190]

from

$62.99

New Platinum Pro Fuel Pump Module

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$28.99

Made From Premium Grade Aerospace Chrome Moly
Center Less Ground To Precise Diameter
Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
Provide With Required Reliability And Improved Performance

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top-Rated Fuel and Emissions Systems Brands For Your 1987 Pontiac Grand Prix

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1987 Pontiac Grand Prixes. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, Dorman, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 1987 Grand Prix start at just $7.29 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1987 Pontiac Grand Prix Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1987 Pontiac Grand Prix, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1987 Pontiac Grand Prix. With over 3 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $28.99. Plus, with over 42 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

from $59.99

(2)

Remanufactured Fuel Injector

“They’re a little noisy but overall I have increased horsepower and torque I love this product”

from $14.99

(37)

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack

“Works Great”

Popular Dorman 1987 Pontiac Grand Prix Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1987 Pontiac Grand Prix owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1987 Grand Prix, Advance Auto Parts carries a full inventory of 2 Dorman Fuel and Emissions Systems. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range from $7.29 to $15.49, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $7.29

(2)

Fuel Pump Lock Ring

“I always get good brand of parts for this company which means alot”

from $15.49

(1)

Fuel Pump Push Rod

“great”

FAQs for 1987 Pontiac Grand Prix Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1987 Pontiac Grand Prixes?

Out of 93 Fuel and Emissions Systems that fit 1987 Pontiac Grand Prixes, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29
Electric Fuel Pump: With Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness w/Connector (20772154) – $79.99

What’s the price range for 1987 Pontiac Grand Prix Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1987 Pontiac Grand Prix start at $1.29 and go up to $420.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1987 Pontiac Grand Prix?

The average price for Fuel and Emissions Systems for the 1987 Pontiac Grand Prix is $59.27. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Pontiac Grand Prix model years?

Yes, we currently carry Fuel and Emissions Systems for 45 model years of Pontiac Grand Prixes between 1962 and 2008. Fuel and Emissions Systems are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, and 2000.

What are the cheapest Fuel and Emissions Systems for my 1987 Pontiac Grand Prix?

The cheapest 1987 Pontiac Grand Prix Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12482002) – $1.29
Exhaust Gas Recirculation (EGR) Valve Gasket (3207781) – $2.99
Exhaust Gas Recirculation (EGR) Valve Gasket (3207897) – $3.29
Metal Clip Nut No.8 (11910637) – $4.99
Fuel Pump Lock Ring (22972948) – $7.29

What are the top-rated Fuel and Emissions Systems that fit the 1987 Pontiac Grand Prix?

Out of 4,800 reviews by customers, our 1987 Pontiac Grand Prix Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1987 Pontiac Grand Prix and their top-rated products:

Air Flow Sensors
- MAP Sensor (10703774) – $65.05

What types of Fuel and Emissions Systems do you sell for my 1987 Pontiac Grand Prix?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1987 Pontiac Grand Prix:

Can I get help with 1987 Pontiac Grand Prix Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Fuel and Emissions Systems and more.

What is your return policy for Pontiac Grand Prix Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1987 Pontiac Grand Prix Fuel and Emissions Systems

Carquest Premium – Multi-Use Connector (Part No.PTA1437)

Carquest Premium – Idle Air Control Valve (Part No.ABA1666)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1009)

Carquest Premium – Vapor Canister (Part No.CPN1225)

Carquest Premium – Fuel Tank Sending Unit FG08ACQ: Includes Strainer and Wiring Harness (Part No.FG08ACQ)

Carquest Premium – Ported Vacuum Switch (Part No.ECA1225)

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Carquest Premium – Multi-Use Connector (Part No.PTA1268)

Carquest Premium – Fuel Pump Pulsator A3541776 (Part No.A3541776)

GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with 16 O-Ring (Part No.217-1533)

GM Genuine Parts – Secondary Air Injection Pump with Bracket (Part No.215-611)

Carquest – Fuel Injector Connector (Part No.28426)

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM34DFI)

ACDelco – Multi-Purpose Pigtail (Part No.PT1357)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC840T)

Carquest Premium – Multi-Use Connector (Part No.ABA3465)

Spectra Premium – Fuel Tank Strap (Part No.ST49)

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM306CFI)

GM Genuine Parts – Air Cleaner Temperature Sensor (Part No.25171651)

Driveworks – Manifold Absolute Pressure Sensor (Part No.31424)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Dorman – Fuel Pump Lock Ring (Part No.579-102)

Dorman – Nylon Shield Retainer- Ford and GM (sold by each) (Part No.700-614)

Carquest Premium – Fuel Pump Module Assembly M2496232: Fuel Pump, Sending Unit and Strainer (Part No.M2496232)

ARP Auto Racing – Chrome Moly (Part No.134-8701)

GM Genuine Parts – Fuel Pump Strainer (Part No.TS32)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2023)

Carquest Premium – Remanufactured Fuel Injector (Part No.A114-1193)

Carquest – Fuel Injector Connector (Part No.28426)

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Carquest Premium – Multi-Use Connector (Part No.ABA3464)

Carquest Premium – Fuel Pump Pulsator A3541776 (Part No.A3541776)

Carquest Premium – Throttle Body Gasket Kit (Part No.AS099)

Driveworks – MAP Sensor (Part No.31390)

Dorman – Metal Clip Nut No.8 (Part No.961-304D)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1015)

NTK – Multi-Purpose Temperature Sensor (Part No.EF0008)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

ACDelco – Multi-Purpose Pigtail (Part No.PT2164)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10075)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1303)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1192)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10074)

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

NTK – Switching Oxygen Sensor: 1 Wire, 15.25" Long, Non-Heated, Direct Fit (Part No.21002)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Delphi – Electric Fuel Pump: With Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness w/Connector (Part No.FE0115)

Carquest Premium – Fuel Pump (Part No.E219663)

Delphi – Fuel Pump Strainer (Part No.FS0177)

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Carquest Premium – Mechanical Fuel Pump 2510500: Includes Gasket (Part No.2510500)

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E219655)

Carquest Premium – Fuel Pump U2496734 (Part No.U2496734)

Carquest Premium – Fuel Pump Strainer FS260355 (Part No.FS260355)

KAI – Electric Fuel Pump (Part No.FMD010049)

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

Holley – Mechanical Fuel Pump (Part No.12-327-13)

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM306CFI)

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

ARP Auto Racing – Chrome Moly (Part No.134-8701)