1987 Nissan 200SX Engine Parts
More 1987 Nissan 200SX Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1987 Nissan 200SX, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1987 Nissan 200SX Engine Parts
Carquest Premium – Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)
from
$9.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Mitsubishi – Mitsuboshi Timing Belt (Part No.A5000283503MBL)
from
$25.90
The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.
Product Features:
See More
Product Features:
- High-tensile strength Carbon Cord
- Abrasion resistant
- High elasticity, high hardness HNBR rubber
- Increased durability
- Reduced noise
- Rubber construction for superior flexibility
- Special low friction tooth fabric
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1057)
from
$27.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Ajusa – Cyl. Head Bolt Set (Part No.A3031860451AJU)
from
$104.24
Cyl. Head Bolt Set
Dayco – Timing Component Kit; Camshaft Belt Tensioner Only, 1 Piece Set (Part No.84016)
from
$45.49
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.
Product Features:
See More
Product Features:
- Engineered for the majority of domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and a tough, wear-resistant belt
- Meets or exceeds OE quality
National – Shaft Repair Sleeve (Part No.99134)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Sealed Power – Engine Crankshaft Main Bearing Set (Part No.7139M)
from
$52.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength – provides conformability required for older applications
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Camshaft Seal (Part No.TCS 45635)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Driveworks – Oil Seal (Part No.S-223420)
from
$7.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – VALVE COVER GROMMET SET (Part No.ES 72840)
from
$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004418238DOR)
from
$12.86
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.
Product Features:
See More
Product Features:
- Comes with rubber seal or gasket
- Direct replacement for a proper fit every time
- Corrosion-resistant
- Quality-tested for trouble-free performance
Sealed Power – Engine Piston Ring Set (Part No.E-558KC)
from
$143.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated ring face
- Increases wear resistance in dirty air conditions
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40628)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Ishino – Stone Intake Plenum Gasket (Part No.A8041117378ISH)
from
$4.59
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
NSK – NSK Timing Belt Tensioner (Part No.A503026107NSK)
from
$40.49
The NSK Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- High quality sealed precision bearing assembly
- OE specified pulley
- Durable long life performance
Nippon Reinz – Oil Pan Gasket, – Front Strip (Part No.A613086939NRZ)
from
$5.69
Nippon Reinz engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, Nippon Reinz offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. Nissan stopped using a 1-piece oil pan gasket on V6 engines manufactured from mid-’87. VG engines after that were assembled using sealing strips at the front and rear crankshaft saddles and liquid gasket sealant along the sides between the engine block and the oil pan.
See More
Anchor – Engine Mount: Rear, 1 Piece (Part No.8701)
from
$21.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to NISSAN 92-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-2017
- Weight approx: 2 Lbs
- COMPLETE MOUNT
- INTERIOR ID: 10.6 MM
- INTERIOR WIDTH: 70.4 MM
- OD: 81.7 MM
- OD WIDTH: 49.8 MM
NOK – Crankshaft Seal (Part No.A8060290350NOK)
from
$9.73
Crankshaft Seal
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72800)
from
$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Sealed Power – Engine Connecting Rod Bearing Set (Part No.6-1845CP)
from
$51.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Felpro – Engine Conversion Gasket Set (Part No.CS 9816)
from
$43.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Cardone – Engine Control Module (Part No.72-3023)
from
$390.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Melling – Stock Replacement OE Type Oil Pump (Part No.M273)
from
$183.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.21178 PT)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 9236 PT)
from
$60.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Contains all the parts needed to complete the repair unless otherwise noted
Ishino – Stone Valve Cover Gasket Set (Part No.A8029194684ISH)
from
$44.70
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
Popular 1987 Nissan 200SX Engine Parts Categories
1987 Nissan 200SX Engine Parts
You count on your 1987 Nissan 200SX to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 69 Engine Parts ranging in price from $0.99 to $2,633.99, you’re sure to find everything you need for your 1987 Nissan 200SX.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 25 different brands like Felpro, Carquest Premium, and National. 1987 Nissan 200SX Engine Parts start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 82 extensive product reviews on 1987 Nissan 200SX Engine Parts. Some of the top-rated Engine Parts products we carry are Econo-Kool® Engine Oil Cooler with 4.7 stars and Timing Component Kit; Camshaft Belt Tensioner Only, 1 Piece Set with 4.3 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1987 Nissan 200SX below to get started!
Top-Rated Engine Parts Brands For Your 1987 Nissan 200SX
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Nissan 200SX running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, National, and even more.
Popular Crankshaft Rebuilders Engine Parts
You’ll find popular Crankshaft Rebuilders brand products across Engine Kits. All are waiting to get your 1987 Nissan 200SX back on the road. Some of the top-rated Crankshaft Rebuilders products in these categories are:
Top-Rated Felpro Engine Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Engine Parts for your 1987 Nissan 200SX, and some of our most reviewed Felpro parts include:
FAQs for 1987 Nissan 200SX Engine Parts
What are the most purchased Engine Parts for the 1987 Nissan 200SX?
Out of 69 Engine Parts for the 1987 Nissan 200SX, the most popular in our inventory are:
from
$12.49
(11)
Engine Oil Filler Cap: 10107, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
from
$27.99
This product is not rated
Coolant Temperature Sensor with Thread Sealant and Washer
Cylinder Head Temperature Sensors
What are the top-rated 1987 Nissan 200SX Engine Parts?
Top-rated Engine Parts for your 1987 Nissan 200SX based on customer reviews/ratings are:
from
$141.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
from
$45.49
(3)
Timing Component Kit; Camshaft Belt Tensioner Only, 1 Piece Set
“Love dayco products would reccomend to all my friends thanks again.”
