1987 Mitsubishi Cordia Steering and Chassis Parts
More 1987 Mitsubishi Cordia Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1987 Mitsubishi Cordia, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1987 Mitsubishi Cordia Steering and Chassis Parts
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Driveworks – Tie Rod End (Part No.DW-ES2347RL)
from
$26.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Rack Pinion Seal Kit (Part No.8654)
from
$93.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Carquest Premium – Bulk – 1/2" I.D. Reservoir Hose (Part No.36209)
from
$43.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$17.99
Camber Bolt Kit
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36197)
from
$52.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Rack & Pinion Bellows Kit (Part No.K9877)
from
$52.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Driveworks – Bellow Kits (Part No.DW-K9358)
from
$13.99
Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response a
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
MOOG – Camber Adjusting Kit (Part No.K90473)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Whiteline – Camber Adjusting Bolt (Part No.KCA412)
from
$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Cardone – Rack and Pinion Assembly (Part No.26-1930)
from
$245.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Driveworks – Suspension Ball Joint (Part No.DW-K9617)
from
$6.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Powercraft – Pump Seal Kit (Part No.8825)
from
$29.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Pressure Hose Assembly (Part No.36916)
from
$82.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Rare Parts – Ball Joint (Part No.RP10638)
from
$38.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Popular 1987 Mitsubishi Cordia Steering and Chassis Parts Categories
1987 Mitsubishi Cordia Steering and Chassis Parts
You count on your 1987 Mitsubishi Cordia to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 37 Steering and Chassis Parts ranging in price from $2.99 to $434.99, you’re sure to find everything you need for your 1987 Mitsubishi Cordia.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Carquest Premium, and Cardone. 1987 Mitsubishi Cordia Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 646 extensive product reviews on 1987 Mitsubishi Cordia Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 3.5 stars and Camber Bolt Kit with 4.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1987 Mitsubishi Cordia below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1987 Mitsubishi Cordia
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Mitsubishi Cordia running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1987 Mitsubishi Cordia back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1987 Mitsubishi Cordia, and some of our most reviewed Imperial parts include:
FAQs for 1987 Mitsubishi Cordia Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1987 Mitsubishi Cordia?
Out of 37 Steering and Chassis Parts for the 1987 Mitsubishi Cordia, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1987 Mitsubishi Cordia Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1987 Mitsubishi Cordia based on customer reviews/ratings are:
from
$52.99
(5)
Tie Rod End
“Bought the driver and passenger side of this Tie Rod end from Moog. On my 98 Sebring there are no grease fittings from the factory, which is one of th”
