1987 Mercedes-Benz 300E Steering and Chassis Parts

Essential 1987 Mercedes-Benz 300E Steering and Chassis Parts

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Febi – Power Steering Pump Repair Kit (Part No.M204070020FEB)

Power Steering Pump Repair Kit

from

$26.08
Power Steering Pump Repair Kit

Meyle – Sway Bar Bracket (Part No.L104073706MEY)

Sway Bar Bracket

from

$2.92
The Meyle Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications.

Product Features:
  • OE-Equivalent and direct fit application
  • Meets OE specifications
See More

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102055631FEB)

Drive Shaft Flex Joint (Guibo)

from

$132.73
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

APA/URO Parts – Sway Bar Bushing (Part No.L105073713APA)

Sway Bar Bushing

from

$3.68
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rein – Sway Bar Link (Part No.SCL0222R)

Sway Bar Link

from

$9.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300016356LEM)

Lemfoerder Tie Rod Assembly

from

$53.82
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010386590MAV)

Power Steering Pump, Remanufactured

from

$272.54
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose CPE (Part No.36219)

Bulk - 3/8" I.D. Return Hose CPE

from

$38.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Febi – Febi Idler Arm Repair Kit (Part No.M303027108FEB)

Febi Idler Arm Repair Kit

from

$36.05
The Febi Idler Arm Repair Kit restores the idler arm reducing front-end vibration, shimmy and unsafe handling. The Febi idler arm Repair Kit is manufactured to OE tolerances for a proper fit and function.

Product Features:
  • Improves steering response
  • Repairs worn components
  • Reduces vibration
  • Reduces tire wear
See More

Stabilus – STAB-O-SHOC Steering Damper (Part No.M400036163STB)

STAB-O-SHOC Steering Damper

from

$55.88
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:
  • Damping forces up to 3000 N in tension and compression direction
  • Damping forces can be set independently of each other in both directions at the factory
  • Non-pressurized, no extension force
  • Positive, direct instant damping
See More

Rare Parts – Tie Rod End (Part No.RP28994)

Tie Rod End

from

$24.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Elring – Power Steering Seal (Part No.M208036389ELR)

Power Steering Seal

from

$9.76
Power Steering Seal

National – Bearings (Part No.A-2)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Febi – Subframe Bushing Kit (Part No.L1021241376FEB)

Subframe Bushing Kit

from

$105.75
The Febi subframe bushing kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

International Suspension Group – Tie Rod Bushing (Part No.M300276578ISG)

Tie Rod Bushing

from

$6.90
Tie Rod Bushing

Rare Parts – Ball Joint (Part No.RP10639)

Ball Joint

from

$56.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Control Arm Front Upper Left (Part No.520-757)

Control Arm Front Upper Left

from

$89.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Remanufactured Power Steering Gear Box (Part No.27-8605)

Remanufactured Power Steering Gear Box

from

$489.99
The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:
  • 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
  • 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
  • All critical components are tested to ensure product reliability.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
  • Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

First Equipment Quality – Subframe Mount (Part No.L1005106212FEQ)

Subframe Mount

from

$6.36
The FEQ Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

1987 Mercedes-Benz 300E Steering and Chassis Parts

You count on your 1987 Mercedes-Benz 300E to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 45 Steering and Chassis Parts ranging in price from $2.92 to $489.99, you’re sure to find everything you need for your 1987 Mercedes-Benz 300E.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 21 different brands like Driveworks, Cardone, and Carquest Premium. 1987 Mercedes-Benz 300E Steering and Chassis Parts start as low as $2.92!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 155 extensive product reviews on 1987 Mercedes-Benz 300E Steering and Chassis Parts.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1987 Mercedes-Benz 300E below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1987 Mercedes-Benz 300E

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Mercedes-Benz 300E running right for years to come. In our inventory you’ll find brands like Driveworks, Cardone, Carquest Premium, and even more.

Popular Driveworks Steering and Chassis Parts

You’ll find popular Driveworks brand products across Steering Shafts. All are waiting to get your 1987 Mercedes-Benz 300E back on the road. Some of the top-rated Driveworks products in these categories are:
Taper Bearing Set
from $8.99
(47)
Taper Bearing Set
Worm Shaft Bearings

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1987 Mercedes-Benz 300E, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters

FAQs for 1987 Mercedes-Benz 300E Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1987 Mercedes-Benz 300E?

Out of 45 Steering and Chassis Parts for the 1987 Mercedes-Benz 300E, the most popular in our inventory are:
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Bearings
from $15.99
(38)
Bearings
Steering Shaft Bearings
Bulk - 3/8" I.D. Return Hose CPE
from $38.99
(8)
Bulk – 3/8" I.D. Return Hose CPE
Power Steering Reservoir Hoses