1987 Jeep Wrangler Bumpers

Essential 1987 Jeep Wrangler Bumpers

Rugged Ridge – Xtreme Heavy Duty; Bumper End Caps (Part No.11540.43)

Xtreme Heavy Duty; Bumper End Caps

from

$394.99
Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:
  • Textured Black
  • Additional Storage
  • Modular Design
  • Bolt-on
  • Limited 5 Year Warranty
See More

Rugged Ridge – Xtreme Heavy Duty; Bumper End Caps (Part No.11540.22)

Xtreme Heavy Duty; Bumper End Caps

from

$409.99
No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. These waterproof lockable

Product Features:
  • Textured Black
  • Additional Storage
  • Modular Design
  • Bolt-on
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – Black, Plastic, Front Right (Part No.55155756AB)

Black, Plastic, Front Right

from

$17.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

KAI – Passenger Side Rear Bumper End (Part No.CH1105140)

Passenger Side Rear Bumper End

from

$34.99
New Standard Replacement Passenger Side Rear Bumper End

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Driver Side Rear Bumper End (Part No.CH1104140)

Driver Side Rear Bumper End

from

$32.99
New Standard Replacement Driver Side Rear Bumper End

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Passenger Side Front Bumper End (Part No.CH1005128)

Passenger Side Front Bumper End

from

$28.99
New Standard Replacement Passenger Side Front Bumper End

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper End (Part No.CH1004128)

Bumper End

from

$28.99
New Standard Replacement Driver Side Front Bumper End

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Westin – WJ2 Full Width Front Bumper (Part No.59-80115)

WJ2 Full Width Front Bumper

from

$996.99
Westins WJ2 Full Width Front Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. The product is designed to utilize both styles of factory fog lights or round post lights. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:
  • Bumper Made Of 0.1875 in. Plate Steel Construction
  • Designed To Work With Factory Or Westin Hitches
  • Integrated Recovery Shackle Mount Points
  • Auxiliary Light Mount Points For Post Mount Square Lights
  • Rock Light Mount Points On Lower Bumper Corners
  • Bottom Frame Mount Prevents Bumper From Rotating
  • 2 Off-Road Jack Points
  • Bolt On Installation; No Drill Required
  • Includes Bumper; Mounting Hardware And Install Instructions
See More

Crown Auto Jeep Replacmnt – 1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts (Part No.55234777)

1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts

from

$132.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Westin – WJ2 Stubby Front Bumper w/Bull Bar (Part No.59-80075)

WJ2 Stubby Front Bumper w/Bull Bar

from

$854.99
Westins WJ2 Stubby Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. With our new WJ2 bumper product, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper, 2 side and 2 front off-road jack points, and holes to hide light harness wires. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:
  • Bumper Made Of 0.1875 in. Plate Steel Construction
  • Designed To Work With Factory Or Westin Hitches
  • Integrated Recovery Shackle Mount Points
  • Auxiliary Light Mount Points For Post Mount Square Lights
  • Rock Light Mount Points On Lower Bumper Corners
  • Bottom Frame Mount Prevents Bumper From Rotating
  • 2 Off-Road Jack Points
  • Bolt On Installation; No Drill Required
  • Includes Bumper; Mounting Hardware And Install Instructions
See More

Crown Auto Jeep Replacmnt – 1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts (Part No.5ED16T3X)

1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts

from

$97.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Westin – WJ2 Full Width Front Bumper (Part No.59-80105)

WJ2 Full Width Front Bumper

from

$854.99
Westins WJ2 Full Width Front Bumper is constructed with 3/16-inch plate steel. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! It is designed to utilize both styles of factory fog lights or round post lights. Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:
  • Bumper Made Of 0.1875 in. Plate Steel Construction
  • Designed To Work With Factory Or Westin Hitches
  • Integrated Recovery Shackle Mount Points
  • Auxiliary Light Mount Points For Post Mount Square Lights
  • Rock Light Mount Points On Lower Bumper Corners
  • Bottom Frame Mount Prevents Bumper From Rotating
  • 2 Off-Road Jack Points
  • Bolt On Installation; No Drill Required
  • Includes Bumper; Mounting Hardware And Install Instructions
See More

Westin – WJ2 Full Width Front Bumper (Part No.59-80045)

WJ2 Full Width Front Bumper

from

$996.99
Westins WJ2 Bumper is constructed with high-strength 3/16-inch plate steel. Our WJ2 Bumper improves ground and tire clearance while offering corner light mount points and rock light mount points, plus 2 side and 2 front off-road jack points. Your winch fits down inside the bumper to allow maximum air flow to your vehicles radiator and the WJ2 Bumper includes pre-drilled holes to allow installation of a winch while the bumper is already installed on your Jeep – most other brands wont! Features recovery hooks with a recovery shackle mounting point to allow easy tow strap attachment. Bolt-on installation so no drilling is required. Recommended optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:
  • Rock Light Mount Points
  • Bolt On Installation; No Drill Required
  • Integrated Recovery Shackle Mount Points
  • Includes Bumper; Mounting Hardware And Install Instructions
  • Designed To Work With Factory Or Westin Hitches
  • Auxiliary Light Mount Points
  • 2 Off-Road Jack Points
  • 0.1875 in. Plate Steel Construction
See More

Westin – WJ2 Stubby Front Bumper w/Bull Bar (Part No.59-80065)

WJ2 Stubby Front Bumper w/Bull Bar

from

$712.99
Westins Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points. Product includes bumper, mounting hardware and install instructions.

Product Features:
  • Bumper Made Of 0.1875 in. Plate Steel Construction
  • Designed To Work With Factory Or Westin Hitches
  • Integrated Recovery Shackle Mount Points
  • Auxiliary Light Mount Points For Post Mount Square Lights
  • Rock Light Mount Points On Lower Bumper Corners
  • Bottom Frame Mount Prevents Bumper From Rotating
  • 2 Off-Road Jack Points
  • Bolt On Installation; No Drill Required
  • Includes Bumper; Mounting Hardware And Install Instructions
See More

Rugged Ridge – Xtreme Heavy Duty; RRC Mount Tube Bumper (Part No.11540.48)

Xtreme Heavy Duty; RRC Mount Tube Bumper

from

$829.99
Looking to add some versatility and style to your Wrangler? Look no further than the Rugged Ridge XHD Modular Bumper. No other bumper can give your Jeep this many looks.

Product Features:
  • Textured Black
  • 2.5 in. Tubing
  • Modular Design
  • Bolt-on
See More

Rugged Ridge – Tube Bumper; Front; 3 Inch; Stainless; Winch Ready (Part No.11563.03)

Tube Bumper; Front; 3 Inch; Stainless; Winch Ready

from

$787.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included).

Product Features:
  • Stainless Steel
  • With Raiser and Winch Cut Out
  • Welded End Caps
See More

KAI – Driver Or Passenger Side Front Bumper Guard (Part No.CH1054149)

Driver Or Passenger Side Front Bumper Guard

from

$69.99
New Standard Replacement Driver Or Passenger Side Front Bumper Guard

Product Features:
  • Made Of Rubber, Poly(Acrylic Acid Ester)
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ARIES – 3 Inch Round Side Bars (Part No.35600-2)

3 Inch Round Side Bars

from

$192.99
The ARIES 3″ bull bar is made for those who face the uncertain road without fear. This particular model is constructed from 304 stainless steel. 304 stainless is high in nickel content, allowing the bull bar to easily resist water, road salt and rust and maintain its mirror-like polished finish in spite of the elements. Other available finishes include high-gloss black stainless steel, textured black steel and semi-gloss black steel. Customizing the look of your vehicle is simple with the ARIES 3″ bull bar. It is equipped with pre-drilled light mounting holes and a removable skid plate. The center crossbar features two pre-drilled holes that readily accept an LED light bar or two LED work lights. The skid plate is made from 304 stainless steel and has a brushed finish to stop rust and hide scratches and scuffs. It also features an aggressive, ARIES-exclusive cutout pattern and can be removed for a customized look. Each ARIES 3″ bull bar is made a vehicle-specific design, meaning that for each make and model, the bull bar has a custom bend and unique mounting brackets. This allows for the best possible fit on your vehicle and ensures solid attachment. The brackets also use pre-existing factory holes in the vehicle’s frame to eliminate drilling, speed up installation and increase rigidity. This bull bar fits select model years of the Honda Ridgeline (see application info to verify fitment).

Product Features:
  • 3″ diameter, heavy-wall tube design
  • 304 stainless steel construction to be strong and truly rust-resistant
  • Mirror-like polished stainless steel finish for a bright, clean accent
  • Two pre-drilled holes in the crossbar for mounting LED light bars or work lights
  • Removable, brushed 304 stainless steel skid plate deflects small road debris
  • No-drill, vehicle-specific application for a custom fit
See More

Smittybilt – Black Matte Textured Powder Coated, Cold Rolled Steel, 1.75"Dia, 5"Max Light (Part No.76829)

Black Matte Textured Powder Coated, Cold Rolled Steel, 1.75"Dia, 5"Max Light

from

$77.99
The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000 Pounds winch. Its also equipped with D Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our mid or full width end plate knowing that bumper clearance would not be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.

Product Features:
  • Bolt On Mounting
  • With Light Mounting Tabs
  • Manufactured From 3/16 Inch Cold Rolled Steel. Solid D Ring Mounts Welded Inside And Out
  • Multi Piece Options Allow You To Build Your Bumper In Any Configuration For Any Situation
  • Built In Winch Plate To Accommodate Up To A 15K Winch
See More

Westin – MAX Winch Tray Bull Bar Light Mount (Part No.46-43635)

MAX Winch Tray Bull Bar Light Mount

from

$77.99
Westin(TM) MAX(TM) Winch Mounting Systems are made to maximize your options for functional style. The MAX(TM) Winch Tray is suitable for the mounting of most major brand winches. The MAX(TM) System gives you the option of adding a MAX(TM) Bull Bar/Light B

Product Features:
  • Features 3 in. Tube
  • Accommodates Three 8 in. Lights
  • No Drill Installation
  • Winch Tray Sold Separately
  • 3 Year Warranty
See More

1987 Jeep Wrangler Bumpers

Maybe you’re in the middle of a full rebuild of that 1987 Jeep Wrangler. Maybe you just need a couple of Bumpers. Either way, Advance Auto Parts has 5 different Bumpers in our inventory ranging from $132.99 to $829.99. That means you can find the exact parts or products you need to keep that 1987 Jeep Wrangler running smoothly.

Bumpers are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Jeep Wrangler. Crown Auto Jeep Replacmnt, Rugged Ridge, and ARIES are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bumpers for your 1987 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bumpers to keep your 1987 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bumpers Brands To Make Your 1987 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bumpers make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bumpers brands and parts.

FAQs for 1987 Jeep Wrangler Bumpers

What are the most purchased Bumpers for the 1987 Jeep Wrangler?

Out of 5 Bumpers for the 1987 Jeep Wrangler, the most popular in our inventory are:
Tube Bumper; Front; 3 Inch; Stainless; Winch Ready
from $787.99
This product is not rated
Tube Bumper; Front; 3 Inch; Stainless; Winch Ready
Custom Front Bumpers
Xtreme Heavy Duty; RRC Mount Tube Bumper
from $829.99
This product is not rated
Xtreme Heavy Duty; RRC Mount Tube Bumper
Custom Front Bumpers
1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts
from $132.99
This product is not rated
1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts
Front Bumpers