1987 Jeep Wrangler Exhaust System Kits

Unique sound and style is what this Rebel Series cat-back exhaust system delivers. 2 1/2″ mandrel bent, 304 stainless steel tubing is 100% hand MIG-welded for race proven strength and durability. A high flow stainless steel, muffler delivers a powerful exhaust tone. The system uses factory mounting locations for an easy install that stays put under any driving condition. Finished with rear exit, quad 3 ½” diameter, stainless steel tips with our signature laser-cut aFe POWER badge for a unique, custom-styled look. 2-1/2″ mandrel bent, 304 stainless steel tubing is less restrictive than stock. This allows maximum flow and low turbulence for increased torque, horsepower and improved throttle response. A primary, free-flowing stainless steel muffler absorbs the high pitch tones and balances exhaust pulses for a powerful exhaust note. Finished with high temp metallic black powder coating for the ultimate in corrosion resistance. Features a custom designed laser cut aFe logo tip brace with a bolt-on red powder coat backing plate to compliment the logo. This system is not compatible with factory receiver (tow hitch).

Product Features:

• High Flow Muffler
• Powerful Exhaust Tone
• 100 Percent MIG Welded

The MagnaFlow Street Series Axle-Back Performance Exhaust System 15178 15178 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L 2007-2018 Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15178 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe’s Rebel Series, dual black tip cat-back exhaust system for your 2007 – 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2″ mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2″ angle-cut, black stainless steel exhaust tips are badged with laser-cut aFe POWER plates to finish off the Rebel Series exhaust system for the perfect combination of performance, value and style. Additional Performance: Compatible with aFe Power Twisted Steel Down-Pipe Loop Relocation Pipe (48-48022-HN or 48-48022-HC) to optimize your performance gain. Mild Tone A free-flowing, stainless steel, high temp metallic black, rear muffler assembly, engineered for the smoothest sounding performance available. A 14″ long, round front muffler assembly is used to absorb the high pitch tones. The rear, 18″ long, oval muffler is used to producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2″ Black Exhaust Tips: This dual rear-exit system features 4-1/2″ dia. high temp metallic black, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.

Product Features:

• Mandrel Bent Stainless Steel
• Long Round Front Muffler and Long Oval Rear Muffler
• Dual Muffler System For Smoothest Sounding Performance
• Dual Rear Exit Exhaust Tips

The MagnaFlow 2018-2024 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 19431 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2018-2024 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 19431 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19431’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 19431 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

The MagnaFlow 2007-2011 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17119 brings additional off-roading prowess and our deep signature exhaust note to your 3.8L 2007-2011 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17119 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17119’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17119 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

The MagnaFlow 2007-2011 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 15238 brings superior boulder-climbing capabilities to your 3.8L 2007-2011 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15238 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15238’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15238 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High clearance design
• Aggressive exterior sound tuning
• Extensive off-road testing to meet your sound and performance needs

The MagnaFlow 2000-2006 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17122 brings additional off-roading prowess and our deep signature exhaust note to your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17122 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17122’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17122 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19327 19327 brings out the personality of your 3.6L 2012-2018 Jeep with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19327 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19327 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17144 17144 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17144 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17144’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17144 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

The MagnaFlow 2018-2024 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 19428 brings superior boulder-climbing capabilities to your 2.0L 2018-2024 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 19428 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19428’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 19428 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High clearance design
• Aggressive exterior sound tuning
• Extensive off-road testing to meet your sound and performance needs

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19416 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19416 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This MACH Force XP Hi-Tuck “RB” Cat-Back exhaust system is constructed of 2.5″ mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response.

Product Features:

• Hi-Tuck Cat Back
• 409 Stainless Steel
• MIG-Welded
• 2.5 in. Dia. Mandrel-Bent Tubing

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 409 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• 100% Hand MIG Welded

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19437 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19437 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19437 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2004-2006 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L 2004-2006 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16695 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16695 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Street Series Axle-Back Performance Exhaust System 15160 15160 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L 2007-2018 Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15160 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

The MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System 15237 15237 brings superior boulder-climbing capabilities to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15237 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15237’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15237 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High clearance design
• Aggressive exterior sound tuning
• Extensive off-road testing to meet your sound and performance needs

Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series.

Product Features:

• Mandrel-Bent 2.5 Inch Tubing And Unique Routing Design
• High Clearance Single Rear Exit For Rough Terrain
• Major Point Of Rust Through With Some Budget Systems Our Fully Sealed Tubing Adds Years To Your System
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup
• Bolt-On, No Weld Design Makes Installation A No Hassle One

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. As a Force II system it produces a mild interior and exterior tone, and is suited to customers looking for efficiency improvements without too aggressive of a tone. Especially recommended daily drivers. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

The MagnaFlow 2018-2024 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 19386 brings superior boulder-climbing capabilities to your 3.6L 2018-2024 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 19386 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19386’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 19386 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High clearance design
• Aggressive exterior sound tuning
• Extensive off-road testing to meet your sound and performance needs

aFe’s Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2″ mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.

Product Features:

• Cost Effective System
• Tubing Is Less Restrictive Than Stock
• Increased Horsepower And Torque
• Aggressive Sound

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• OE Style/Welded-On Hangers
• Free Flow Muffler

The MagnaFlow Competition Series Cat-Back Performance Exhaust System 15118 15118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.6L 2012-2018 Jeep with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15118 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15118’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound