1987 Jeep Wrangler Bodies and Fender Parts

Essential 1987 Jeep Wrangler Bodies and Fender Parts

Rugged Ridge – Spare Tire Carrier (Part No.11585.01)

Spare Tire Carrier

from

$117.99
If you have installed larger tires on your rig then a matching spare tire is a must. The problem comes when you try to bolt that new monster tire/wheel combo on your factory spare tire mount. Rugged Ridge has the answer with the HD Tire carrier Mount. The

Product Features:
  • Allows For Up To a 35 in. Tire
  • Tire Mounts 2 in. Further Away Form The Body
  • 1/4 in. Steel Construction
  • Limited 5 Year Warranty
See More

Omix – B-Pillar; Left; Side (Part No.12009.18)

B-Pillar; Left; Side

from

$75.99
B-Pillar; Left; Side

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52001961)

OE Replacement

from

$7.99
Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – Front Or Rear fender Flare Nut, Black Plastic, Front Or Rear, Left Or Right (Part No.J4004868)

Front Or Rear fender Flare Nut, Black Plastic, Front Or Rear, Left Or Right

from

$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Westin – E-Series 3 Round Nerf Step Bars (Part No.23-3295)

E-Series 3 Round Nerf Step Bars

from

$296.99
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:
  • Mount Kit Included
  • 3 in. Round Step Bars
  • Economical Step-Up Solution
  • Vehicle Specific Applications
  • Injection Molded Polymer Step Pad
  • Recessed Step Area
  • Bolt-On Installation; No Drilling Required
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52002661)

OE Replacement

from

$8.99
Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Crown Auto Jeep Replacmnt – Grille Mount And Rear Body Mount Bolt, Single (Part No.J4007570)

Grille Mount And Rear Body Mount Bolt, Single

from

$10.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Omix – Emblem (Part No.DMC-5451627)

Emblem

from

$44.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Officially Licensed
  • Limited 5 Year Warranty
See More

Omix – Fender (Part No.12004.14)

Fender

from

$485.99
Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Primered
  • Limited 5 Year Warranty
See More

Rugged Ridge – Standard Locking Con (Part No.13101.09)

Standard Locking Con

from

$202.99
Standard Locking Con

Energy Suspension – Body Mount Set (Part No.2.4108R)

Body Mount Set

from

$268.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Dorman – Front Position Strut Bumper (Part No.523-258)

Front Position Strut Bumper

from

$25.49
This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rugged Ridge – RRC Rocker Guards; 2 (Part No.11504.36)

RRC Rocker Guards; 2

from

$719.99
RRC Rocker Guards; 2

Covercraft – Custom Hood Protector (Part No.45496-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when we

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Crown Auto Jeep Replacmnt – Fender Flare Extension Right Front Black Textured (Part No.55254928)

Fender Flare Extension Right Front Black Textured

from

$22.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Textured Black Finish
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Omix – Hard Top Seal Kit (Part No.12304.07)

Hard Top Seal Kit

from

$75.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Rubber
  • Eliminates Rattling; Wind Noise; Water Damage
See More

Omix – Gasket; Air Vent; 84 (Part No.19707.06)

Gasket; Air Vent; 84

from

$14.29
Gasket; Air Vent; 84

Omix – U-Nut; M8-1.25;Spare (Part No.11811.91)

U-Nut; M8-1.25;Spare

from

$4.99
U-Nut; M8-1.25;Spare

Rampage – EXTERIOR ACCESSORIES (Part No.773555)

EXTERIOR ACCESSORIES

from

$53.99
EXTERIOR ACCESSORIES

KAI – Fender Flare (Part No.CH1269107)

Fender Flare

from

$59.99
New Standard Replacement Passenger Side Fender Flare, Textured Black

Product Features:
  • Textured Black, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Crown Auto Jeep Replacmnt – OE Replacement (Part No.52058121AB)

OE Replacement

from

$138.99
Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Omix – Screw; Spare Tire Ca (Part No.17258.09)

Screw; Spare Tire Ca

from

$2.29
Screw; Spare Tire Ca

Omix – Emblem (Part No.DMC-55010768)

Emblem

from

$34.99
This Wrangler emblem from Omix-Ada is enforced with double sided 3M automotive adhesive tape for an extra strong hold. (MOPAR license pending)

Product Features:
  • Wrangler
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Floor Pan Plug (Part No.12031.05)

Floor Pan Plug

from

$11.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Single
  • Limited 5 Year Warranty
See More

Rugged Ridge – Body Armor; Corner Guards (Part No.11651.07)

Body Armor; Corner Guards

from

$244.99
Protecting the rear corners of your Jeep just got a whole lot easier! Now offering added protection and a rugged look for your Wrangler, this pair of Rugged Ridge Body Armor rear corners are constructed from impact resistant polycarbonate and have a styli

Product Features:
  • Matte Black
  • Polycarbonate
  • Protects Rear Corners From Trail Damage
  • Double Sided Adhesive Tape
  • Limited 5 Year Warranty
See More

Omix – Tune-Up Kit (Part No.17256.02)

Tune-Up Kit

from

$115.99
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Get a high quality ignition tune up kit from Omix-ADA to get your Jeep running smooth again.

Product Features:
  • Full Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rugged Ridge – Spartacus HD Tire Ca (Part No.11546.50)

Spartacus HD Tire Ca

from

$777.99
Spartacus HD Tire Ca

Rugged Ridge – Tire Carrier Spacer (Part No.11585.02)

Tire Carrier Spacer

from

$95.99
Bolts to your existing factory spare tire mount and relocates the tire two inches up and out. Features 5×4.5 inch and 5×5.5 inch wheel bolt patterns and tough powder coated black textured finish. Caution: The tailgates on 07-12 Wrangler models are not des

Product Features:
  • Black Powder Coated
  • 5×4.5 in. and 5×5.5 in. Wheel Bolt Patterns
  • Bolts To Your Existing Factory Spare Tire Mount
  • Relocates the tire two inches up and out
  • Limited 5 Year Warranty
See More

1987 Jeep Wrangler Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1987 Jeep Wrangler. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 85 different Bodies and Fender Parts in our inventory ranging from $1.99 to $715.99. That means you can find the exact parts or products you need to keep that 1987 Jeep Wrangler running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Jeep Wrangler. Crown Auto Jeep Replacmnt, Omix, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1987 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 18 reviews in this category, some of the top rated parts include Jeep Body Mount Kit with 1.0 stars.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1987 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1987 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Omix Bodies and Fender Parts

We carry Omix parts in our stock across Shock Bumpers and Body Parts categories, plus more. For a 1987 Jeep Wrangler, our most popular Omix Bodies and Fender Parts include:
Axle Snubber
from $34.99
(1)
Axle Snubber
Shock Bumpers
Torx Head Dash Bolt
from $2.79
(1)
Torx Head Dash Bolt
Body Parts

FAQs for 1987 Jeep Wrangler Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1987 Jeep Wrangler?

Out of 85 Bodies and Fender Parts for the 1987 Jeep Wrangler, the most popular in our inventory are:
OE Replacement
from $7.99
This product is not rated
OE Replacement
Body Mount Brackets
Body Mount Bolt, Left or Right Front
from $11.99
This product is not rated
Body Mount Bolt, Left or Right Front
Body Bolts
Equalizer Bar 78-89
from $15.49
This product is not rated
Equalizer Bar 78-89
Body Parts

What are the top-rated 1987 Jeep Wrangler Bodies and Fender Parts?

Top-rated Bodies and Fender Parts for your 1987 Jeep Wrangler based on customer reviews/ratings are:
Jeep Body Mount Kit
from $67.99
(1)
Jeep Body Mount Kit
“Good product but description says set. Doesnt say one set and seven are needed. Over priced for one body mount”