1987 Jeep J10 Transmission Parts

Below you will find various in-demand Jeep Transmission Parts, components and accessories for your 1987 J10. Advance Auto Parts has popular J10 parts like Transmission Bearings, Transmission Mounts, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other J10 model years including 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1988 and more. Select a category of 1987 Jeep J10 Transmission Parts below and start saving instantly.

Popular 1987 Jeep J10 Transmission Parts Categories

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Transmission Oil Cooler Lines

Countershaft Bearings

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Differential Bearings

Transmission Bushings

Automatic Transmission Oil Pump Seals

Pinion Seals

Neutral Safety Switch Connectors

Transmission Seals and O-rings

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic and Manual Transmission Shift Boots

Shaft Seals

Miscellaneous Automatic Transmission Seals

Transmission Shift Kits

Gear Shift Lever Repair Kits

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Output Shaft Bearings

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Fluid Filler Tube Seals

Automatic Transmission Speedometer Pinion Seals

Front Pump Seals

Intermediate Shaft Bearings

Synchro Hub Bearings

Automatic Transmission Oil Pressure Switch Connectors

Automatic Transmission Repair Sleeve

Drive Sprocket Bearings

Essential Transmission Parts for 1987 Jeep J10s

from

$3.99

AT SEAL

from

$26.90

Dorman’s Clutch Pilot Bearing extends the life of the transmission and helps ensures smooth, reliable shift quality. Replacement recommended during clutch replacement.

Product Features:

Direct replacement for a proper fit every time
High quality metal construction
Ensures transmission longevity
Replacement reduces driveline noise and vibration

from

$13.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$11.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.79

Product Features:

Transmission line fitting kit
Dodge, Jeep with hose splicer fittings
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Coated for extra protection against corrosion

from

$69.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$171.99

AT MASTER REPAIR KIT

from

$12.49

AT OIL PUMP SEAL

from

$74.99

AT SHIFT KIT

from

$259.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan! Adds 2 additional quarts to the system.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs

from

$8.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$7.59

BEARING

from

$13.99

AT OIL PAN GASKET

from

$3.99

AT SOLENOID SEAL

from

$18.29

Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$3.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$766.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$22.99

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$30.19

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$26.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$8.89

CUP

from

$11.99

AT SHF LINK BUSHING

from

$27.99

AUTO TRANS BAND

from

$3.29

Product Features:

Brand may vary by location

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$168.99

AT BANNER KIT

from

$11.99

Limited 12 Month Or 12,000 Mile Warranty

Upgrade your 1987 Jeep J10 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1987 Jeep J10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Transmission Parts are key to keeping your J10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 70 Transmission Parts for the 1987 Jeep J10, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1987 Jeep J10 at great prices. Our Transmission Parts inventory for this model ranges from just $2.79 to $879.99, with an average price of $60.36. Our 70 Transmission Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 1987 Jeep J10 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Jeep J10, we stock popular OEM and aftermarket Transmission Parts from top names like National, Driveworks, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $3.29, and at an average 4.2 stars rating. With 478 customer reviews and counting, our 1987 Jeep J10 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 Jeep J10 is always ready to roll. We’re committed to providing you with everything you need to keep your J10 in top shape, all in one place. Start shopping confidently below for your 1987 Jeep J10!

Best-Selling Transmission Bearings for 1987 Jeep J10s

Enhance the driving experience in your Jeep with 6 quality Transmission Bearing components, starting at $4.99.

show more show less

from

$16.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$18.29

Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$9.99

CUP

from

$7.59

BEARING

Most Popular 1987 Jeep J10 Transmission Mounts

Customize your Jeep with 3 Transmission Mounts products like Transmission Mounts, all priced under $113.99.

show more show less

from

$8.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to JEEP 72-93;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1972-1993
Weight approx: 2 Lbs
STYLE: BAR
STUDS: TWO INCLUDED
MATERIAL: RUBBER, STEEL

from

$113.99

This red polyurethane transmission mount was manufactured to OE specifications for the highest quality available. Bolt on application for a direct fit and easy installation.

Product Features:

Polyurethane
Easy to Install
Single
Direct Fit

from

$11.99

Limited 12 Month Or 12,000 Mile Warranty

Top Picks for 1987 Jeep J10 Automatic Transmission Parts

Upgrade Jeep J10s with top-quality Automatic Transmission Parts parts, including 6 OEM and aftermarket selections for your 1987 model.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$11.99

AT SHF LINK BUSHING

from

$41.99

AUTO TRANS BAND

from

$60.99

AUTO TRANS BAND

from

$56.99

REPAIR SLEEVE

from

$26.90

Dorman’s Clutch Pilot Bearing extends the life of the transmission and helps ensures smooth, reliable shift quality. Replacement recommended during clutch replacement.

Product Features:

Direct replacement for a proper fit every time
High quality metal construction
Ensures transmission longevity
Replacement reduces driveline noise and vibration

In-Demand Transmission Seals for 1987 Jeep J10s

Select from 20 premium Transmission Seals parts for your 1987 Jeep J10, with prices ranging from $2.79 to $69.99.

show more show less

from

$10.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$16.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$41.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$3.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.29

National« has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today┐s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20░F to 300░F / -29░C to 49░C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.29

Design type: spring loaded; multi-lip
Temperature range: -40░F to 225░F / -40░C to 107░C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$9.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$5.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.79

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$11.99

AT EXT HOUSING SEAL

from

$3.99

AT SEAL

from

$69.99

Design type: spring loaded; multi-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$12.49

AT OIL PUMP SEAL

from

$8.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$3.29

Product Features:

Brand may vary by location

Most Sold 1987 Jeep J10 Transmission Cooler and Parts

Explore our best-selling Jeep parts for the 1987 J10 among 14 OEM and aftermarket options starting from $11.99.

show more show less

from

$79.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$54.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$11.99

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$22.99

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$62.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 1987 Jeep J10

Shop for the best-rated brands offering Transmission Parts and other products for your 1987 Jeep J10s. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 1987 J10 start at just $3.29 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1987 Jeep J10 Transmission Parts

When it comes to maintaining or upgrading your 1987 Jeep J10, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1987 Jeep J10. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $21.99. Plus, with over 7 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.99

(3)

Multi Purpose Seal

“76 k10 the truck have never rolled more smooth parts fit prefectly”

from $16.99

(3)

Multi Purpose Seal

“Fit perfectly and stopped the leak. For anyone who needs to know, I used this seal for my Tremec TKO 600 transmission. This seal is a direct replaceme”

from $41.99

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

Popular Driveworks 1987 Jeep J10 Transmission Parts

Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 1987 Jeep J10 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1987 J10, Advance Auto Parts carries a full inventory of 3 Driveworks Transmission Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Driveworks Transmission Parts range from $3.29 to $16.29, plus, with more than 23 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $16.29

(14)

Tapered Cone/Cup Wheel Bearing Set

“Advance Auto website when entering my 1989 Ford F150 doesn’t ask if it is 2 wheel or 4 wheel drive. So I had to return the first set”

from $3.29

(1)

Oil Seal

“Perfect fit”

from $10.29

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

FAQs for 1987 Jeep J10 Transmission Parts

Which Transmission Parts are best-sellers for 1987 Jeep J10s?

Out of 70 Transmission Parts that fit 1987 Jeep J10s, the following parts are the top sellers:

Mounting Kit System (6014844) – $11.99
Tapered Cone/Cup Wheel Bearing Set (5050723) – $16.29
Econo-Kool® Transmission Oil Cooler (6014720) – $40.99

What’s the price range for 1987 Jeep J10 Transmission Parts?

Transmission Part prices for the 1987 Jeep J10 start at $2.79 and go up to $879.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1987 Jeep J10?

The average price for Transmission Parts for the 1987 Jeep J10 is $60.36. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Jeep J10 model years?

Yes, we currently carry Transmission Parts for 13 model years of Jeep J10s between 1974 and 1988. Transmission Parts are bought most frequently for the following model years: 1988, 1986, 1985, 1984, 1983, 1982, 1981, 1980, and 1979.

What are the cheapest Transmission Parts for my 1987 Jeep J10?

The cheapest 1987 Jeep J10 Transmission Parts we carry in stock are:

Automatic Transmission Speedometer Pinion Seal (11236107) – $2.79
Oil Seal (5441250) – $3.29
Auto Transmission Manual Shaft Seal (11494000) – $3.29
AT SOLENOID SEAL (11239035) – $3.99
AT SEAL (11236293) – $3.99

What are the top-rated Transmission Parts that fit the 1987 Jeep J10?

Out of 478 reviews by customers, our 1987 Jeep J10 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1987 Jeep J10 and their top-rated products:

Transmission Bearings
- Tapered Cone/Cup Wheel Bearing Set (5050723) – $16.29
- Taper Bearing Cone (3277410) – $18.29
Automatic Transmission Pan and Gaskets
- Tapered Cone/Cup Wheel Bearing Set (5050723) – $16.29
- Taper Bearing Cone (3277410) – $18.29

What types of Transmission Parts do you sell for my 1987 Jeep J10?

As of 4/10/25, these are some of the most in-demand types of Transmission Parts for a 1987 Jeep J10:

Can I get help with 1987 Jeep J10 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Transmission Parts and more.

What is your return policy for Jeep J10 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Jeep J10 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1987 Jeep J10 Transmission Parts

ATP – AT SEAL (Part No.TO-34)

Dorman – Pilot Bearing (Part No.I1010831589DOR)

Crown Auto Jeep Replacmnt – For Use With T176 Transmission Or T177 Transmission, With Spring/ Spring Cap (Part No.SLR176K)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-37)

Imperial – Transmission Line Fitting Kit (Part No.240392)

National – Multi Purpose Seal (Part No.5778V)

ATP – AT MASTER REPAIR KIT (Part No.TM-14)

ATP – AT OIL PUMP SEAL (Part No.TO-8)

ATP – AT SHIFT KIT (Part No.TK-2)

B & M – Transmission Cast Deep Pan, Brushed Finish – TH400 (Part No.20280)

National – Bearings (Part No.TC-2435)

FAG US – BEARING (Part No.B2110)

ATP – AT OIL PAN GASKET (Part No.TG-8)

ATP – AT SOLENOID SEAL (Part No.JO-15)

National – Taper Bearing Cone (Part No.LM501349)

National – Multi Purpose Seal (Part No.8609)

Driveworks – Oil Seal (Part No.S-471271)

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8691)

Carquest Premium – Oil Pressure Switch Connector (Part No.PTA1557)

FAG US – CUP (Part No.15245)

ATP – AT SHF LINK BUSHING (Part No.TO-41)

ATP – AUTO TRANS BAND (Part No.TX-40)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

ATP – AT BANNER KIT (Part No.JM-10)

Crown Auto Jeep Replacmnt – Auto Trans Mount, OE Replacement, Jeep 2.5, 4.2, 5.0 and 5.9 Engine (Part No.J1370910)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

National – Taper Bearing Cone (Part No.LM501349)

Driveworks – Taper Bearing Cup (Part No.S-JLM-104910)

National – Bearings (Part No.B-5020)

FAG US – CUP (Part No.LM501310)

FAG US – BEARING (Part No.B2110)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2693)

Rugged Ridge – Transmission Mount; Red; 63-95 Jeep CJ/Grand Wagoneer/Wrangler SJ/YJ (Part No.18392.01)

Crown Auto Jeep Replacmnt – Auto Trans Mount, OE Replacement, Jeep 2.5, 4.2, 5.0 and 5.9 Engine (Part No.J1370910)

ATP – AT SOLENOID SEAL (Part No.JO-15)

ATP – AT SHF LINK BUSHING (Part No.TO-41)

ATP – AUTO TRANS BAND (Part No.TX-47)

ATP – AUTO TRANS BAND (Part No.TX-18)

FAG US – REPAIR SLEEVE (Part No.SR3506)

Dorman – Pilot Bearing (Part No.I1010831589DOR)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.471271)

National – Multi Purpose Seal (Part No.7300S)

National – Shaft Repair Sleeve (Part No.99187)

Driveworks – Oil Seal (Part No.S-471271)

National – Multi Purpose Seal (Part No.5778)

Driveworks – Oil Seal (Part No.S-5778)

National – Multi Purpose Seal (Part No.8609)

National – Multi Purpose Seal (Part No.5206)

National – Multi Purpose Seal (Part No.331227H)

ATP – AT SEL SHAFT SEAL (Part No.TO-15)

Motive Gear – Differential Pinion Seal (Part No.5778)

Driveworks – Oil Seal (Part No.S-3173)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

ATP – AT SEAL (Part No.TO-34)

National – Multi Purpose Seal (Part No.5778V)

ATP – AT OIL PUMP SEAL (Part No.TO-8)

National – Multi Purpose Seal (Part No.313156)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)