1987 Jeep Grand Wagoneer Drive Shafts and Axles

Essential 1987 Jeep Grand Wagoneer Drive Shafts and Axles

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9436)

Front Drive Shaft: Not Greasable, Direct Replacement

from

$574.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82505)

CV Axle Shaft Assembly

from

$106.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – Extreme Duty CV Axle (Part No.NCV545841XD)

Extreme Duty CV Axle

from

$219.99
Manufactured to be an OE replacement with the addition of eXtreme Duty outer boots designed to withstand extreme low temperatures and resist impact tears. CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:
  • Thermoplastic Outboard Boots
  • All New Materials
  • Boots Performance Tested to -50F
  • Moly-Blend Grease in inner and outer joints
See More

Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)

Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X

from

$17.99
Product Features:
  • Bearing retainer
  • Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
See More

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$32.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More

National – Bearings (Part No.B-2012)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Disconnect Axle Pilot Bearing For Dana 30, 44 & 60, 0.813" O.D. (Part No.18050)

Disconnect Axle Pilot Bearing For Dana 30, 44 & 60, 0.813" O.D.

from

$17.99
Disconnect axle pilot bearing for Dana 30, 44 & 60, 0.813″ O.D.

Product Features:
  • Axle pilot bearing
  • Fits Dana Spicer 44 with disconnect axles
  • 0.813″ O.D.
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Crown Auto Jeep Replacmnt – 1 Piece, Steel (Part No.83503388)

1 Piece, Steel

from

$63.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Autopart International Inc – Wheel Bearing (Part No.K80001944039API)

Wheel Bearing

from

$63.40
Wheel Bearing

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

National – Multi Purpose Seal (Part No.2300)

Multi Purpose Seal

from

$32.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Outer Axle Seal To Be Used With Set10 Bearing (Part No.30218)

Outer Axle Seal To Be Used With Set10 Bearing

from

$19.99
Outer axle seal to be used with set10 bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • For use with Set10 bearing
See More

Yukon Gear – Outer Stub Dust Shield For Dana 30 XJ, TJ, YJ – 2.738" I.D. (Part No.33021)

Outer Stub Dust Shield For Dana 30 XJ, TJ, YJ - 2.738" I.D.

from

$10.99
Outer stub dust shield for Dana 30 XJ, TJ, YJ. 2.738″ I.D.

Product Features:
  • Outer stub dust shield
  • Fits Jeep XJ, YJ and TJ
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Spicer – Universal Joint (Part No.5-760X)

Universal Joint

from

$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

1987 Jeep Grand Wagoneer Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1987 Jeep Grand Wagoneer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 36 different Drive Shafts and Axles in our inventory ranging from $5.99 to $883.99. That means you can find the exact parts or products you need to keep that 1987 Jeep Grand Wagoneer running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Jeep Grand Wagoneer. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1987 Jeep Grand Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 52 reviews in this category, some of the top rated parts include Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1987 Jeep Grand Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1987 Jeep Grand Wagoneer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Jeep Grand Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Wagoneer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1987 Jeep Grand Wagoneer, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

Top 1987 Jeep Grand Wagoneer Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1987 Jeep Grand Wagoneer. Popular National parts include:
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1987 Jeep Grand Wagoneer Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1987 Jeep Grand Wagoneer?

Out of 36 Drive Shafts and Axles for the 1987 Jeep Grand Wagoneer, the most popular in our inventory are:
CV Axle Shaft Assembly
from $106.99
(12)
CV Axle Shaft Assembly
Drive Shaft and Axles
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
from $13.99
This product is not rated
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
Axle Shaft Seals
Inner Axle Dust Shield For Dana 30
from $8.99
This product is not rated
Inner Axle Dust Shield For Dana 30
Axle Dust Shields

What are the top-rated 1987 Jeep Grand Wagoneer Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1987 Jeep Grand Wagoneer based on customer reviews/ratings are:
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”