1987 Ford Mustang Air Conditioning Parts

Essential 1987 Ford Mustang Air Conditioning Parts

Carquest Premium – Fuel Pump Relay Connector (Part No.PTA1277)

Fuel Pump Relay Connector

from

$14.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

National – Bearings (Part No.5001-KFF)

Bearings

from

$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

KAI – A/C Condenser (Part No.CND3791)

A/C Condenser

from

$94.99
New Platinum Pro A/C Condenser, With Receiver Drier, 3.7/4.0/4.6/5.0/5.4 Liter Engines

Product Features:
  • With Receiver Drier, 3.7/4.0/4.6/5.0/5.4 Liter Engines, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Factory Air – Evaporator Core Repair Kit w/ White Orifice Tube (Part No.16152)

Evaporator Core Repair Kit w/ White Orifice Tube

from

$18.29
Optimized refrigerant flow; Core design meets or exceeds OE performance And efficiency; Application specific design for GM vehicles; Replaces damaged evaporator inlet tube
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55703)

A/C Discharge Line Hose Assembly

from

$37.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest – Multi Purpose Relay (Part No.83A1009)

Multi Purpose Relay

from

$23.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54171)

A/C Plate and Fin Evaporator

from

$186.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.36486)

System Mounted Cycling Pressure Switch

from

$18.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

KAI – A/C Receiver Drier, V8 Engine (Part No.ARD010231)

A/C Receiver Drier, V8 Engine

from

$64.99
New Standard Replacement A/C Receiver Drier, V8 Engine

Product Features:
  • V8 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C New; w/ Clutch; w/ FS18 Compressor (Part No.T68199)

A/C New; w/ Clutch; w/ FS18 Compressor

from

$311.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil (Part No.47531)

New York & Tec 206,209,210,HG850,HG1000 Clutch Assembly w/ Coil

from

$171.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Santech – A/C O-Ring Kit (Part No.R1151317277SII)

A/C O-Ring Kit

from

$14.95
A/C O-Ring Kit

KAI – A/C Expansion Valve, V6 Engine (Part No.ACX011760)

A/C Expansion Valve, V6 Engine

from

$36.99
New Standard Replacement A/C Expansion Valve, V6 Engine

Product Features:
  • V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – HVAC Cut-Off Switch (Part No.ABA1035)

HVAC Cut-Off Switch

from

$46.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Electrical Relay (Part No.83177)

Electrical Relay

from

$24.29
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.6112K)

A/C Compressor and Component Kit

from

$499.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Factory Air – Liquid Line Orifice Tube Repair Kit w/o Orifice Tube (Part No.16150)

Liquid Line Orifice Tube Repair Kit w/o Orifice Tube

from

$38.49
All hoses are constructed with double wall barrier hose compatible with R134A or R12; Contains gaskets, o-rings, or seals to properly replace the product; Crimp fitting connection; Application specific design
See More

Carquest Premium – A/C Liquid Line Hose Assembly w/ Captured Orifice Tube (Part No.T55649)

A/C Liquid Line Hose Assembly w/ Captured Orifice Tube

from

$35.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Factory Air – Carbon Shaft Seal Kit (Part No.24021)

Carbon Shaft Seal Kit

from

$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Lip Seal Shaft Seal Kit (Part No.24020)

Lip Seal Shaft Seal Kit

from

$23.49
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – A/C New; w/ Clutch; w/ DKS17D Compressor (Part No.T158486)

A/C New; w/ Clutch; w/ DKS17D Compressor

from

$404.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Standard – Reman York-Diesel Kiki-Zexel-Seltec DKS17D Compressor w/ Clutch (Part No.DW157486)

Reman York-Diesel Kiki-Zexel-Seltec DKS17D Compressor w/ Clutch

from

$357.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Electrical Harness - 2-Wire GM A/C Clutch with Diode

from

$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Electrical Harness – 2-Wire Compressor (Part No.85152)

Electrical Harness - 2-Wire Compressor

from

$19.29
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA2742)

A/C Clutch Cycle Switch Connector

from

$35.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Harness Connector (Part No.37235)

Harness Connector

from

$15.79
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More

1987 Ford Mustang Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1987 Ford Mustang. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 43 different Air Conditioning Parts in our inventory ranging from $0.99 to $617.99. That means you can find the exact parts or products you need to keep that 1987 Ford Mustang running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Ford Mustang. Carquest Premium, Factory Air, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1987 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 793 reviews in this category, some of the top rated parts include System Mounted Cycling Pressure Switch with 4.8 stars and A/C Liquid Line Hose Assembly w/ Captured Orifice Tube with 3.8 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1987 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1987 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Carquest Standard Air Conditioning Parts

We carry Carquest Standard parts in our stock across AC Compressor Without Clutch categories, plus more. For a 1987 Ford Mustang, our most popular Carquest Standard Air Conditioning Parts include:
Reman Nippondenso 6P148A Compressor w/ Clutch
from $308.99
(5)
Reman Nippondenso 6P148A Compressor w/ Clutch
AC Compressor Without Clutch

FAQs for 1987 Ford Mustang Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1987 Ford Mustang?

Out of 43 Air Conditioning Parts for the 1987 Ford Mustang, the most popular in our inventory are:
Multi Purpose Relay
from $19.99
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Cap & Valve A/C System Seal Kit
from $16.99
(6)
Cap & Valve A/C System Seal Kit
AC Line O-Rings
Multi Purpose Relay
from $29.49
This product is not rated
Multi Purpose Relay
Air Conditioning Relays

What are the top-rated 1987 Ford Mustang Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1987 Ford Mustang based on customer reviews/ratings are:
System Mounted Cycling Pressure Switch
from $26.49
(14)
System Mounted Cycling Pressure Switch
“Easy to install and verify confirm that the part is working properly. There is no loss of refrigerant (R134A) during removal of the old part and insta”
A/C Liquid Line Hose Assembly w/ Captured Orifice Tube
from $32.99
(5)
A/C Liquid Line Hose Assembly w/ Captured Orifice Tube
“Installed as part of putting back A/C in my 1987 Mustang GT. It fit perfectly and was simple enough to install.”
Liquid Line Orifice Tube Repair Kit w/o Orifice Tube
from $38.49
(4)
Liquid Line Orifice Tube Repair Kit w/o Orifice Tube
“This is an ingenious idea, it allows you to replace or clean the orifice tube as needed. The instructions aren’t for the average person. This part is ”