1987 Ford E-150 Econoline Heater Hoses
More 1987 Ford E-150 Econoline Heater Hoses
Find your specific 1987 Ford E-150 Econoline original or aftermarket Heater Hoses below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1987 Ford E-150 Econoline Heater Hoses
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 25 1/2 Inch Length (Part No.87969)
from
$131.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.19277)
from
$68.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 9 Inch Length (Part No.87666)
from
$16.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length (Part No.87633)
from
$16.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dorman – Molded Heater Hose: Steel/Rubber (Part No.626-212)
from
$258.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Gates – Premium Modular Coolant Hose (Part No.22614)
from
$197.99
Product Features:
See More
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation + the leading cause of hose failure
- EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Heater Hose (Part No.18084)
from
$44.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)
from
$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Molded Heater Hose; EPDM Rubber, 15/32 Inch Diameter, 11 Inch Length (Part No.87768)
from
$38.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 20 Inch Length (Part No.87605)
from
$12.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.18070)
from
$27.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, .63" Diameter (Part No.A70646)
from
$26.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 36 Inch Length (Part No.87767)
from
$40.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dorman – Heater Hose Connector (Part No.800-403)
from
$15.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Heater Hose Connector (Part No.800-404)
from
$15.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Clip Nut – U-Type – 1/4 In.-20 X 9/16 In. (Part No.961-313D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Heater Hose Connecto (Part No.R30361329114DOR)
from
$10.15
Heater Hose Connecto
Gates – Quick-Lok½ Heater Hose Connector (Part No.28501)
from
$20.79
Product Features:
See More
- Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
- Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
- Fit just as the OEM quick connects for easy installation as well as removal
Dorman – Clip Nut – U Threaded-1/4-20 In X 9/16 In, Panel Range.025 In – .150 In (Part No.45818)
from
$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)
from
$19.49
Product Features:
See More
- Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
- Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
- Fit just as the OEM quick connects for easy installation as well as removal
Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)
from
$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Help – Heater Hose Connector – 5/8 In. Tube x 5/8 In. Hose (Part No.47165)
from
$15.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Coolant Fitting (Part No.626-571)
from
$12.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Clip Nut -U-Threaded,1/4-20 In X9/16 In, Panel Range.025 In -.150 In (sold by each) (Part No.700-523)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Popular 1987 Ford E-150 Econoline Heater Hoses Categories
1987 Ford E-150 Econoline Heater Hoses
Maybe you’re in the middle of a full rebuild of that 1987 Ford E-150 Econoline. Maybe you just need a couple of Heater Hoses. Either way, Advance Auto Parts has 14 different Heater Hoses in our inventory ranging from $12.49 to $44.49. That means you can find the exact parts or products you need to keep that 1987 Ford E-150 Econoline running smoothly.
Heater Hoses are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Ford E-150 Econoline. Dorman, Dayco, and Gates are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Heater Hoses for your 1987 Ford E-150 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 459 reviews in this category, some of the top rated parts include Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 Inch Length with 1.0 stars.
So if you’re in the market for aftermarket Heater Hoses to keep your 1987 Ford E-150 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Heater Hoses Brands To Make Your 1987 Ford E-150 Econoline Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Ford E-150 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Heater Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 Econoline the best it can be. Be sure to browse some of our top Heater Hoses brands and parts.
Popular Dorman Heater Hoses
We carry Dorman parts in our stock across Heater Hose Fittings categories, plus more. For a 1987 Ford E-150 Econoline, our most popular Dorman Heater Hoses include:
FAQs for 1987 Ford E-150 Econoline Heater Hoses
What are the most purchased Heater Hoses for the 1987 Ford E-150 Econoline?
Out of 14 Heater Hoses for the 1987 Ford E-150 Econoline, the most popular in our inventory are:
from
$26.99
(27)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, .63" Diameter
Heater Hoses
from
$25.99
This product is not rated
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length
Heater Hoses
What are the top-rated 1987 Ford E-150 Econoline Heater Hoses?
Top-rated Heater Hoses for your 1987 Ford E-150 Econoline based on customer reviews/ratings are:
from
$18.29
(2)
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 Inch Length
“most backyard mechanics would be able to tell if this or any other molded hose would fit their application if they could see the sizes like ID,OD,and ”
