1987 Ford Bronco Catalytic Converters
More 1987 Ford Bronco Catalytic Converters
Find your specific 1987 Ford Bronco original or aftermarket Catalytic Converters below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1987 Ford Bronco Catalytic Converters
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94016)
from
$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94016 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.334006)
from
$202.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 334006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93307)
from
$901.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93307 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1985-1995 Ford F-150, 1985-1995 Ford Bronco, and more, this direct-fit catalytic converter also interchanges with OE part F4TZ-5F250-D. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93306)
from
$465.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93306 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1984-1987 Ford F-150, 1984-1987 Ford F-250, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15742)
from
$825.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Standard® direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.80708)
from
$271.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51206)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93312)
from
$879.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93312 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1988-1996 Ford F-150, 1988-1995 Ford F-250, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82312)
from
$1355.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94007)
from
$124.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15037)
from
$102.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15032)
from
$171.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94015)
from
$126.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94015 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447206)
from
$390.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.93516)
from
$164.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93516 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93302)
from
$913.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93302 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1987-1995 Ford F-150, 1987-1995 Ford E-150 Econoline, and more, this direct-fit catalytic converter also interchanges with OE parts F4UZ-5F250-A and F4UZ-5F250-B, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81512)
from
$754.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15142)
from
$511.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82208)
from
$336.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93324)
from
$530.99
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93324 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1996 Ford F-150, 1996 Ford Bronco, and more, this direct-fit catalytic converter also interchanges with OE part F6TZ-5F250-ADB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.447107)
from
$422.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 447107 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed (Part No.93238)
from
$224.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.334307)
from
$945.99
MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 334307 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1985-1995 Ford F-150, 1985-1995 Ford Bronco, and more, this direct-fit catalytic converter also interchanges with OE part F4TZ-5F250-D. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94005)
from
$169.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.80906)
from
$896.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15042)
from
$167.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.80612)
from
$401.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.333007)
from
$394.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 333007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Popular 1987 Ford Bronco Catalytic Converters Categories
1987 Ford Bronco Catalytic Converters
Maybe you’re in the middle of a full rebuild of that 1987 Ford Bronco. Maybe you just need a couple of Catalytic Converters. Either way, Advance Auto Parts has 15 different Catalytic Converters in our inventory ranging from $126.99 to $999.99. That means you can find the exact parts or products you need to keep that 1987 Ford Bronco running smoothly.
Catalytic Converters are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Ford Bronco. Walker and Magnaflow are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Catalytic Converters for your 1987 Ford Bronco, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 24 reviews in this category, some of the top rated parts include Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter with 1.0 stars.
So if you’re in the market for aftermarket Catalytic Converters to keep your 1987 Ford Bronco rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Catalytic Converters Brands To Make Your 1987 Ford Bronco Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Ford Bronco demands trusted brand parts and products to keep it running. Many trusted brands of Catalytic Converters make up Advance Auto Parts’ inventory, and all are ready to help make your Bronco the best it can be. Be sure to browse some of our top Catalytic Converters brands and parts.
Popular Walker Catalytic Converters
We carry Walker parts in our stock across Catalytic Converters categories, plus more. For a 1987 Ford Bronco, our most popular Walker Catalytic Converters include:
from
$167.99
(5)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
from
$239.99
(1)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
FAQs for 1987 Ford Bronco Catalytic Converters
What are the most purchased Catalytic Converters for the 1987 Ford Bronco?
Out of 15 Catalytic Converters for the 1987 Ford Bronco, the most popular in our inventory are:
from
$271.99
This product is not rated
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
Catalytic Converters
from
$182.99
This product is not rated
California Grade CARB Compliant Universal Catalytic Converter
Catalytic Converters
from
$901.99
(5)
Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
Catalytic Converters
What are the top-rated 1987 Ford Bronco Catalytic Converters?
Top-rated Catalytic Converters for your 1987 Ford Bronco based on customer reviews/ratings are:
from
$913.99
(1)
Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
“The manifold fit was close but not exact due to poor quality control. The two flanges were offset 1/2″ making installation very difficult and time co”
