1987 Dodge Charger Body Parts
More 1987 Dodge Charger Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1987 Dodge Charger, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1987 Dodge Charger Body Parts
AutoCraft – Window Handle (Part No.76960)
from
$8.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.
Product Features:
See More
Product Features:
- Ideal replacement – this window crank handle matches the fit and function of the original equipment component
- Durable construction – this window crank handle is made of durable material to withstand extended use
- Easy to install – this window crank requires no special tools to install
- Versatile design – this window crank handle is suitable for use in various locations in the vehicle
KAI – Window Crank Handle (Part No.GMK211142168)
from
$12.99
New Goodmark Window Crank, All Mopar Cars
Product Features:
See More
Product Features:
- All Mopar Cars
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Multi Purpose Relay (Part No.RAA1752)
from
$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1077)
from
$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Mirror Assembly: Passenger Side, Power Adjustment, Heated, 1 Pack (Part No.955-1737)
from
$113.99
This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.
Product Features:
See More
Product Features:
- Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
- Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
- Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
- Easy installation – no special tools or equipment is necessary for installing this new part
Burco – Side View Replacement Mirror (Part No.2101)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.3011)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.2414)
from
$24.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Dorman – Window Lift Motor Gear Kit (Part No.747-411)
from
$26.99
This replacement power window motor gear matches the dimensions of the original part. It restores power window operation when the original gear has become stripped and is made of quality materials for reliable service.
Product Features:
See More
Product Features:
- Ideal replacement – this power window motor gear matches the original part on specified vehicle years, makes and models
- Durable construction – made of quality materials for reliable service
- Cost-effective solution – offers original equipment function at a competitive price
- Quality tested – this part has undergone try-on and lifecycle testing to ensure a quality fit and long service life
Le Bra – Front End Cover, Vinyl, Black (Part No.55051-01)
from
$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Custom Front End Cover (Part No.551291-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.55115-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Covercraft – Custom Hood Protector (Part No.45194-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
Le Bra – Custom Front End Cover (Part No.551492-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.551043-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Atlas Lift – Lift Support (Part No.LS10869)
from
$33.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Liftgate Lift Support: 16.77" Ext Length, 6.43" Travel, 149 Lbs of Force, 1 Pk (Part No.D4400)
from
$21.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
StrongArm – Trunk Lift Support: 11.33" Ext Length, 3.94" Travel, 77 Lbs of Force, 1 Pk (Part No.E4064)
from
$15.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10454)
from
$18.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Hood Lift Support: 12.41" Ext Length, 3.91" Travel, 78 Lbs of Force, 1 Pk (Part No.E6303)
from
$13.79
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 13.62" Ext Length, 4.5" Travel, 60 Lbs of Force, 1 Pk (Part No.E6558)
from
$16.79
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Carquest – Idle Air Control Valve Connector (Part No.PT302)
from
$36.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
- Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
- RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Popular 1987 Dodge Charger Body Parts Categories
1987 Dodge Charger Body Parts
You count on your 1987 Dodge Charger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 13 Body Parts ranging in price from $8.99 to $159.99, you’re sure to find everything you need for your 1987 Dodge Charger.
Brands matter. If you want to shop a specific Body Parts brand, we stock 8 different brands like Carquest Premium, Carquest, and Dorman. 1987 Dodge Charger Body Parts start as low as $8.99!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1987 Dodge Charger Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1987 Dodge Charger below to get started!
Top-Rated Body Parts Brands For Your 1987 Dodge Charger
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Dodge Charger running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest, Dorman, and even more.
Popular Dorman Body Parts
You’ll find popular Dorman brand products across Vehicle Windows. All are waiting to get your 1987 Dodge Charger back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Body Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Body Parts for your 1987 Dodge Charger, and some of our most reviewed parts include:
FAQs for 1987 Dodge Charger Body Parts
What are the most purchased Body Parts for the 1987 Dodge Charger?
Out of 13 Body Parts for the 1987 Dodge Charger, the most popular in our inventory are:
from
$29.49
This product is not rated
Deck Lid / Liftgate Ajar Switch Connector
Door Jamb Switch Connector
