1987 Chevrolet V10 Bodies and Fender Parts
Keep Your 1987 Chevrolet V10 in Top Shape with Quality Bodies and Fender Parts
Whether you’re repairing or upgrading your Bodies and Fender Part, using high-quality parts is key to keeping your 1987 Chevrolet V10 looking sharp and performing at its best. At Advance Auto Parts we carry a wide selection of dependable options, including Body Side Molding Clips, Body Mounts, and Rocker Panels. Whether you’re replacing a damaged part or enhancing your truck’s style and protection, you’ll find exactly what you need to get the job done right.
Competitive Prices and Extensive Inventory
The average price for a 1987 Chevrolet V10 Bodies and Fender Part at Advance Auto Parts is around $86.72, with a range that starts at $1.99 and goes up to $567.99. With 27 options in stock from 5 trusted brands, finding the right fit is easy. Popular picks like Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In, Body Cab Mount Set, and B-Pillar/Rocker Panel start at just $1.99 and offer a great balance of form and function.
Explore Related Parts
While you’re upgrading or replacing your Bodies and Fender Part, don’t forget to check out other key components like Truck Beds and Vehicle Windows. At Advance Auto Parts, we’re here to help you keep your 1987 Chevrolet V10 in peak condition, inside and out.
Essential 1987 Chevrolet V10 Bodies and Fender Parts
KAI – Roll Pan (Part No.EFXRP15)
from
$199.99
New ProEFX Rear Roll Pan With License Plate, Fleetside
Product Features:
See More
Product Features:
- Fleetside Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Roll Pan (Part No.EFXRP01)
from
$199.99
New ProEFX Steel Front Roll Pan
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP147)
from
$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29
Product Features:
See More
Product Features:
- Front Section, 22 1/4 X 29, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.RRP082)
from
$102.99
New Standard Replacement Passenger Side Extended Cab Floor, 24 X 33
Product Features:
See More
Product Features:
- 24 X 33, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP103)
from
$47.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – B-Pillar/Rocker Panel (Part No.RRP102)
from
$46.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4
Product Features:
See More
Product Features:
- 46 3/4 X 11 3/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dee Zee – With Step Pads, 3" Round Bent/ 64" L, Powder Coated, Black, Steel (Part No.DZ3700291)
from
$424.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of black powder coated steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 2 Pads On The Bar
- Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)
from
$567.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 1 Pad On The Bar
- Frame Mounted For Maximum Strength
- Powder Coated Steel Braces Resist Rust
- Powder Coated Steel Braces Resist Rust
- Molded Plastic Step Pads For Secure Footing
- Fit Most Full And Mid Size Pickups
KAI – Wheel Arch Trim (Part No.GM1290101)
from
$21.99
New Standard Replacement Front Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1790102)
from
$26.99
New Standard Replacement Rear Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104R)
from
$13.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2
Product Features:
See More
Product Features:
- 33 1/2 X 6 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Backing Plate (Part No.RRP104)
from
$8.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4
Product Features:
See More
Product Features:
- 26 1/8 X 4 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Cab Mount Set (Part No.3.4116R)
from
$112.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)
from
$1.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
KAI – Sheetmetal Sheet (Part No.RRP960)
from
$13.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
KAI – Rocker Panel (Part No.RRP101)
from
$27.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP100)
from
$26.99
New Standard Replacement Passenger Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Patch Panel (Part No.RRP121)
from
$18.99
New Standard Replacement Driver Side Lower Rear Tip Of Fender, 12 1/4 X 12 1/4
Product Features:
See More
Product Features:
- 12 1/4 X 12 1/4, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK4174610732R)
from
$117.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High
Product Features:
See More
Product Features:
- 7 3/4 Inches Wide X 14 1/2 Inches High
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel Patch (Part No.RRP150)
from
$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel Patch (Part No.RRP151)
from
$46.99
New Standard Replacement Driver Side Rear Quarter Panel Section, 60 1/2 X 28
Product Features:
See More
Product Features:
- 60 1/2 X 28, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1987 Chevrolet V10 Bodies and Fender Parts Categories
Most Popular Body Side Molding Clip for 1987 Chevrolet V10s
Enhance your 1987 Chevrolet V10 with this popular Body Side Molding Clip we have in stock, for $1.99.
Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)
from
$1.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Best-Selling 1987 Chevrolet V10 Body Mount
Upgrade your V10 with our best-selling Body Mount.
Energy Suspension – Body Cab Mount Set (Part No.3.4116R)
from
$112.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Top-Quality Rocker Panels for 1987 Chevrolet V10s
Choose a high-quality OEM or aftermarket Rocker Panel for Chevrolet V10s and enjoy top-notch performance from $26.99.
KAI – Rocker Panel (Part No.RRP101)
from
$27.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.RRP100)
from
$26.99
New Standard Replacement Passenger Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2
Product Features:
See More
Product Features:
- Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Top Picks for 1987 Chevrolet V10 Wheel Arch Trims
Invest in one of our 4 durable Wheel Arch Trims for your 1987 Chevrolet, knowing you’re getting trusted brands and expert craftsmanship.
KAI – Wheel Arch Trim (Part No.GM1290101)
from
$21.99
New Standard Replacement Front Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1791102)
from
$31.99
New Standard Replacement Rear Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1790102)
from
$26.99
New Standard Replacement Rear Driver Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GM1291101)
from
$22.99
New Standard Replacement Front Passenger Side Wheel Opening Molding
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Side Bars and Sideskirts for 1987 Chevrolet V10s
Make a smart move for your 1987 Chevrolet V10 with products all priced from $424.99 to $567.99.
Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)
from
$567.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 1 Pad On The Bar
- Frame Mounted For Maximum Strength
- Powder Coated Steel Braces Resist Rust
- Powder Coated Steel Braces Resist Rust
- Molded Plastic Step Pads For Secure Footing
- Fit Most Full And Mid Size Pickups
Dee Zee – With Step Pads, 3" Round Bent/ 64" L, Powder Coated, Black, Steel (Part No.DZ3700291)
from
$424.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of black powder coated steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.
Product Features:
See More
Product Features:
- Mounting Kit Included
- Frame Body Mount Bolts
- Drilling Required
- 2 Pads On The Bar
- Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
- Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
FAQs for 1987 Chevrolet V10 Bodies and Fender Parts
What are the best-selling Bodies and Fender Parts for 1987 Chevrolet V10s?
Out of 27 Bodies and Fender Parts that fit 1987 Chevrolet V10s, the following parts are the top sellers:
- Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
- Body Cab Mount Set (22907908) – $112.99
- B-Pillar/Rocker Panel (11755917) – $47.99
What’s the price range for 1987 Chevrolet V10 Bodies and Fender Parts?
The prices of Bodies and Fender Parts for the 1987 Chevrolet V10 range from $1.99 up to $567.99 for the most premium parts.
What is the average price of a Bodies and Fender Part for a 1987 Chevrolet V10?
The average price for Bodies and Fender Parts for the 1987 Chevrolet V10 is $86.72. Keep in mind the variety of part types within our Bodies and Fender Part category, where you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Bodies and Fender Parts for my 1987 Chevrolet V10?
The cheapest 1987 Chevrolet V10 Bodies and Fender Parts we carry are:
- Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
- Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.79
- Backing Plate (11729320) – $8.99
- Sheetmetal Sheet (11756482) – $13.99
- Backing Plate (11736596) – $13.99
Does Advance Auto Parts sell Bodies and Fender Parts for any other 1987 Chevrolet models?
Yes. We stock Bodies and Fender Parts for 27 other popular 1987 Chevrolet models. Some of the most popular are 1987 Camaro Bodies and Fender Parts, 1987 Monte Carlo Bodies and Fender Parts, 1987 Corvette Bodies and Fender Parts, 1987 Caprice Bodies and Fender Parts, and 1987 Blazer Bodies and Fender Parts.
What types of Bodies and Fender Parts do you sell for my 1987 Chevrolet V10?
As of 11/2/25, these are some of the most in-demand types of Bodies and Fender Parts for a 1987 Chevrolet V10:
Can I get help with 1987 Chevrolet V10 Bodies and Fender Part orders?
Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Bodies and Fender Parts and more.
What is your return policy for Chevrolet V10 Bodies and Fender Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet V10 Bodies and Fender Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.