1987 Chevrolet S10 Blazer Steering and Chassis Parts
More 1987 Chevrolet S10 Blazer Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1987 Chevrolet S10 Blazer, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1987 Chevrolet S10 Blazer Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.20-7827)
from
$69.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
Carquest Premium – Bulk – 5/8" I.D. Reservoir Hose (Part No.36220)
from
$50.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Dorman – Left Steering Knuckle (Part No.697-904)
from
$951.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Pitman Arm (Part No.K6255)
from
$90.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy duty design
- Engineered steel composition results in a stronger component
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
MOOG – Caster/Camber Shim (Part No.K100191)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
National – Multi Purpose Seal (Part No.3553)
from
$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest – Back Up Light Connector (Part No.PT343)
from
$26.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
- Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
- RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Rare Parts – Conrol Arm W/Bj (Part No.RP11607)
from
$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Torsion Bar Load Kit (Part No.T40016)
from
$181.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High quality construction
- Saves time on installation
- For both professionals and DIYers
- Designed for use on cars and light trucks
- Incorporates proven design and engineering features
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1025)
from
$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
CTR – Ball Joint (Part No.L2020457197CTR)
from
$38.16
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Driveworks – Steering Tie Rod End (Part No.DW-ES2249RLT)
from
$15.79
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Rancho – RS5000 Steering Damper (Part No.RS5401)
from
$90.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
MOOG – Tie Rod End (Part No.ES2033RLT)
from
$41.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Stabilizer Bar Bushing Kit (Part No.K6453)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K5254)
from
$15.79
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Dorman – Help – Power Steering Caps (Part No.82581)
from
$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)
from
$116.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Torsion Bar Mount (Part No.K6485)
from
$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
MOOG – Stabilizer Bar Bushing Kit (Part No.K201177)
from
$33.49
Backed by superior materials and rigorous testing, MOOG synthetic fabric lined sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- INNOVATIVE DESIGN — Synthetic fabric lining paired with a high-quality natural rubber material promotes durability
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation that eliminates the need for lubrication and maintenance
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Incorporates proven design and engineering features
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Ball Joint (Part No.DW-K5289)
from
$34.99
Product Features:
See More
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Carquest Premium – Repair Fittings (Part No.35023)
from
$14.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Camber Adjusting Kit (Part No.K6367)
from
$41.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$53.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Steering Damper Cylinder (Part No.SSD56)
from
$86.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)
from
$9.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Popular 1987 Chevrolet S10 Blazer Steering and Chassis Parts Categories
1987 Chevrolet S10 Blazer Steering and Chassis Parts
You count on your 1987 Chevrolet S10 Blazer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 203 Steering and Chassis Parts ranging in price from $2.49 to $951.99, you’re sure to find everything you need for your 1987 Chevrolet S10 Blazer.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 24 different brands like DriveWorks, Moog, and Carquest Premium. 1987 Chevrolet S10 Blazer Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,981 extensive product reviews on 1987 Chevrolet S10 Blazer Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1987 Chevrolet S10 Blazer below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1987 Chevrolet S10 Blazer
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Chevrolet S10 Blazer running right for years to come. In our inventory you’ll find brands like DriveWorks, Moog, Carquest Premium, and even more.
Popular CTR Steering and Chassis Parts
You’ll find popular CTR brand products across Ball Joints. All are waiting to get your 1987 Chevrolet S10 Blazer back on the road. Some of the top-rated CTR products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1987 Chevrolet S10 Blazer, and some of our most reviewed Driveworks parts include:
FAQs for 1987 Chevrolet S10 Blazer Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1987 Chevrolet S10 Blazer?
Out of 203 Steering and Chassis Parts for the 1987 Chevrolet S10 Blazer, the most popular in our inventory are:
What are the top-rated 1987 Chevrolet S10 Blazer Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1987 Chevrolet S10 Blazer based on customer reviews/ratings are:
from
$28.49
(29)
Ball Joint
“It’s a ball joint. Better than what I took out. It fits just fine. However, the hardware is questionable. I decided to use it just to see if it lasts.”
