1987 Chevrolet Monte Carlo Performance Exhaust Products

Essential 1987 Chevrolet Monte Carlo Performance Exhaust Products

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)

Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942441)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952548)

Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)

Exhaust Manifold Gasket Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5912)

Ultra Seal: Exhaust Gasket Set

from

$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Has A Graphite Core W/ Steel Outer Layers
  • Graphite Core Has Excellent Thermo-conductivity
  • Coated With High Temp Silicone For Sealing
  • Will Not (brindle ) Or Indent Aluminum Heads
See More

Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7205)

Exhaust Manifold Gasket Set for Chevrolet

from

$31.99
Product Features:
  • Designed To Match Port Openings Of Cylinder Heads
  • Excellent Free-Flowing Seal
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5910)

Ultra Seal: Exhaust Gasket Set

from

$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Withstands Intense Exhaust Heat
  • Graphite-Impregnated Facing
  • Steel Expanded Metal Core
  • Superior Tensile Strength
  • Resists Deteriorating
  • Anti-stick Properties
  • Easy Removal For Disassembly
See More

Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)

Real-Seal; Header Gasket

from

$85.39


Product Features:
  • Water/Weather Resistant
  • Re-Useable
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching
  • Made In USA
See More

Hooker Headers – Competition Header (Part No.2451-1HKR)

Competition Header

from

$619.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – LS1 Swap Headers for 66-72 Chevelle, El Camino, Monte Carlo & Sprint (Part No.2455-1HKR)

LS1 Swap Headers for 66-72 Chevelle, El Camino, Monte Carlo & Sprint

from

$552.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Aero Chamber Muffler (Part No.21501HKR)

Aero Chamber Muffler

from

$120.99
The polished stainless steel Aero Chamber is designed to do much more than simply muffle exhaust noise. The Aero Chamber Muffler produces a deep throaty powerful sound that will not change with time. The Hooker Aero Chamber uses a unique step principal, similar to that which is currently popular in racing header design. The aerodynamically designed chambers flow 23 percent better and produce more horsepower and torque than the most popular high performance brand. The stainless steel construction assures good looks, corrosion protection ang long life.

Product Features:
  • All Aluminized/Stainless Steel
  • Deep Throaty Powerful Sound
  • 23 percent More Flow Than Others
  • More Horsepower And Torque
  • Sound Absorption Chamber
  • Stepped Acceleration Chamber
See More

Hooker Headers – Competition Header (Part No.2466HKR)

Competition Header

from

$269.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Dynomax – 89017 Exhaust System Kit (Part No.89017)

89017 Exhaust System Kit

from

$259.99
Give your vintage vehicle’s exhaust system an upgrade with a DynoMax® dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:
  • COMPATIBILITY — Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine spec
  • BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
  • FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
  • IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
  • SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
  • COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
  • PREMIUM MATERIALS – Made from quality aluminized steel for durability and long life
  • BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
  • WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use
See More

Mr. Gasket – Alternator Bracket (Part No.4954)

Alternator Bracket

from

$19.29
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:
  • Chrome plated
  • Similar to OEM design
  • May be adaptable to other applications
See More

Mr. Gasket – Header Bolt Set (Part No.2211G)

Header Bolt Set

from

$50.39
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 16 per Package
  • Resist corrosion and provides a clean professional appearance
See More

Mr. Gasket – Alternator Bracket (Part No.5170)

Alternator Bracket

from

$38.49
Original equipment style bracket in high quality chrome for years of service. Includes hardware.

Product Features:
  • Chrome Plated Heavy Gauge Steel
  • Can Be Used For Other Applications
  • Looks Better Than Painted
  • Hardware included
See More

Mr. Gasket – Header Bolt Set (Part No.2210G)

Header Bolt Set

from

$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:
  • Bright Ball Burnish Finish
  • Made From 304 Stainless
  • Compact Hex Head Is Ideal Where Space Is Limited
  • 12 Per Set
  • Resist corrosion and provides a clean professional appearance
See More

Mr. Gasket – Alternator Bracket (Part No.5171)

Alternator Bracket

from

$37.69
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, Similar in design to OEM units, these brackets can be adapted to other engines.

Product Features:
  • Replaced GM # 6262956
  • Polished To High Luster
  • Chrome Plated For Lasting Beauty
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Spectre – Alternator Bracket (Part No.4719)

Alternator Bracket

from

$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features:
  • Fits Big Block Chevy engines with a long water pump from 1969 and later
  • Manufactured from high quality steel
  • Upper bracket for passenger side mounting
  • Features a triple chrome-plated finish
  • Stock replacement part
See More

1987 Chevrolet Monte Carlo Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet Monte Carlo. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 17 different Performance Exhaust Products in our inventory ranging from $20.99 to $619.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet Monte Carlo running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet Monte Carlo. Mr. Gasket, FEL-PRO Performance, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 1987 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 29 reviews in this category, some of the top rated parts include Aero Chamber Muffler with 4.5 stars and Real-Seal; Header Gasket with 5.0 stars.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1987 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 1987 Chevrolet Monte Carlo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

Top 1987 Chevrolet Monte Carlo Performance Exhaust Products from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Exhaust Products for your 1987 Chevrolet Monte Carlo. Popular Mr. Gasket parts include:
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
from $20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
Performance Exhaust Manifold Gaskets

FAQs for 1987 Chevrolet Monte Carlo Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 1987 Chevrolet Monte Carlo?

Out of 17 Performance Exhaust Products for the 1987 Chevrolet Monte Carlo, the most popular in our inventory are:
Exhaust Manifold Gasket Set
from $31.49
(2)
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
Header Bolt Set
from $41.99
This product is not rated
Header Bolt Set
Performance Exhaust Header Hardware
Competition Header
from $269.99
(1)
Competition Header
Performance Exhaust Headers

What are the top-rated 1987 Chevrolet Monte Carlo Performance Exhaust Products?

Top-rated Performance Exhaust Products for your 1987 Chevrolet Monte Carlo based on customer reviews/ratings are:
Aero Chamber Muffler
from $120.99
(2)
Aero Chamber Muffler
“I like a certain amount of old school correctness in the aftermarket parts on my 1970 Bronco. I purchased the Hooker Dual Exhaust setup with Hooker A”
Real-Seal; Header Gasket
from $85.39
(1)
Real-Seal; Header Gasket
“Great product”
Competition Header
from $619.99
(1)
Competition Header
“I loved the materials used and and the product. Advanced AP has gone way beyond everyone else for their customer service. Now for the issues with the ”