1987 Chevrolet Corvette Engine Internals
More 1987 Chevrolet Corvette Engine Internals
Find your specific 1987 Chevrolet Corvette original or aftermarket Engine Internals below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1987 Chevrolet Corvette Engine Internals
Sealed Power – Main Bearing Set (Part No.152M)
from
$145.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- H14 Super Duty alloy material
- Best bronze alloy material
- Does not have flash tin plating
- Extreme fatigue resistance & strength
- Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
- Silicon particles help polish crankshaft journal (reduces wear during operation)
Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4400MA 10)
from
$93.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Reduces dramatically or eliminates bearing wear
- Exacting tolerances
- Meets or exceeds OEM specifications
- Made with silicon to provide greater surface hardness
Sealed Power – Engine Piston Set (Part No.8KH423DCP 30)
from
$190.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Felpro – Engine Crankshaft Repair Sleeve (Part No.16228)
from
$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Engine$aver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
Felpro – Engine Crankshaft Repair Sleeve (Part No.16258)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Engine$aver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)
from
$369.99
There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.
Product Features:
See More
Product Features:
- Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
- Manufactured From 8740 Chrome Moly Steel
- Heat Treated To 200,000 Pounds Per Square Inch
- Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
- 200,000 PSI
- Sold As A Kit
ARP Auto Racing – For Use With Chevy Small Block, 5/8" Socket Size, 3/4" – 16 Thread Size (Part No.134-2501)
from
$36.49
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 PSI bolts that let you exert maximum clamping force. Special features include 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.
Product Features:
See More
Product Features:
- Ultra Strong Bolt Rated At 200,000 PSI
- 1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
- Delivers ARP Quality And Reliability
- Made In USA
- 12-Point Head
- Sold Individually
- 200,000 PSI
- 2.470″ Underhead Length
Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-3190A 20)
from
$42.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Dramatically reduces or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Sealed Power – Connecting Rod Bearing Set (Part No.8-7200CH)
from
$125.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- H14 Super Duty alloy material
- Our best bronze alloy material – extreme fatigue resistance & strength.
- Does not have flash tin plating
- Ensures dependable performance and superior service life
- Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
- Application-specific design for perfect fit and correct operation
Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP 30)
from
$7.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP 20)
from
$6.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Piston (Part No.W1009P)
from
$57.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Cast with FM132 Eutectic proprietary alloy
- Performance & dependability of original equipment pistons
- High quality aluminum
- Utilizes ISO & QS certified manufacturing
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston (Part No.WH423DCP)
from
$20.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Victor Reinz – Engine Crankshaft Seal (Part No.81-10619-00)
from
$9.49
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40520)
from
$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ACDelco – GM Original Equipment Crankshaft Oil Seal (Part No.A8060177425ACD)
from
$36.28
ACDelco GM Original Equipment Engine Crankshaft Seals are high quality radial shaft seals, which seal in engine oil and keep dirt and water out, and are GM-recommended replacements for your vehicle’s original components. Made from synthetic rubber or plastic composite materials, this engine crankshaft seal conforms to the rotating crankshaft sealing surface to provide leak-free operation. These original equipment engine crankshaft seals have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Mr. Gasket – Woodruff Key (Part No.984G)
from
$30.19
Short style. The offset cam and crankshaft key is another method to increase torque and horsepower within the operating range you select.
Product Features:
See More
Product Features:
- Increases Low-End Torque
- Increases Mid-Range Horsepower
- Reduces Low-End Torque
- Increases Top-End Horsepower
Dorman – Connecting Rod Nuts, Type 2, 3/8-24 X 9/16 In., Ford (sold by each) (Part No.635-002)
from
$1.29
This engine connecting rod nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine connecting rod nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Piston (Part No.W454NP)
from
$23.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Cast with FM132 Eutectic proprietary alloy
- Performance & dependability of original equipment pistons
- High quality aluminum
- Utilizes ISO & QS certified manufacturing
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston (Part No.WH423DCP 40)
from
$19.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Sealed Power – Engine Piston (Part No.WH423DCP 60)
from
$19.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Sealed Power – Engine Piston (Part No.WH423DCP 20)
from
$17.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Sealed Power – Engine Piston (Part No.WH345DCP 40)
from
$17.79
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Hypereutectic
- Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
- Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
- Piston skirts protected by next-gen DUROSHIELD« coating.
- TAC┐ ring groove geometry
- Weight matched to +/- 2 grams.
Sealed Power – Engine Piston Ring Set (Part No.E-530K)
from
$202.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Face of top rings coated with latest generation Plasma-Moly
- Decreases friction
- Very resistant to scuffing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston Ring Set (Part No.E-251X 40)
from
$56.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston Ring Set (Part No.E-245X 30)
from
$50.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston Ring Set (Part No.E-251K 60)
from
$87.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Face of top rings coated with latest generation Plasma-Moly
- Decreases friction
- Very resistant to scuffing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Premiumium Piston Ring Set (Part No.R-9905 60)
from
$202.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Application-specific design for perfect fit and correct operation
- Face of top rings coated with latest-generation plasma-moly
- Plasma-moly ring face decreases friction and resists scuffing
- Delivers dependable performance and superior service life
- Recommended for all racing applications (where file fitting the ring end gap delivers maximum power)
Popular 1987 Chevrolet Corvette Engine Internals Categories
1987 Chevrolet Corvette Engine Internals
Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet Corvette. Maybe you just need a couple of Engine Internals. Either way, Advance Auto Parts has 85 different Engine Internals in our inventory ranging from $1.29 to $369.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet Corvette running smoothly.
Engine Internals are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet Corvette. Sealed Power, National, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Internals for your 1987 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 53 reviews in this category, some of the top rated parts include Engine Crankshaft Main Bearing Set with 5.0 stars and Oil Seal with 4.0 stars.
So if you’re in the market for aftermarket Engine Internals to keep your 1987 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Internals Brands To Make Your 1987 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Engine Internals make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Engine Internals brands and parts.
Popular National Engine Internals
We carry National parts in our stock across Crankshaft Seals categories, plus more. For a 1987 Chevrolet Corvette, our most popular National Engine Internals include:
Top 1987 Chevrolet Corvette Engine Internals from Sealed Power
Sealed Power products are another trusted brand when it comes to Engine Internals for your 1987 Chevrolet Corvette. Popular Sealed Power parts include:
FAQs for 1987 Chevrolet Corvette Engine Internals
What are the most purchased Engine Internals for the 1987 Chevrolet Corvette?
Out of 85 Engine Internals for the 1987 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1987 Chevrolet Corvette Engine Internals?
Top-rated Engine Internals for your 1987 Chevrolet Corvette based on customer reviews/ratings are:
