Essential 1987 Buick Regal Performance Engines

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$83.99

COMP Cams Hi-Tech Roller Race Timing Sets include cast iron camshafts gears, induction hardened billet steel crank sprockets, and pre-stretched, heat-treated double roller chains with heavy-duty large pin design. They feature 3 keyway crank sprockets for

Product Features:

Cast iron camshaft gear and induction hardened billet steel crank sprocket
Pre-stretched, heat-treated true double roller chain with heavy-duty large pin design; chain available separately
Ideal for all street performance and race applications
Features 3 keyway crank sprocket for 4-degree incremental adjustability, 4-degree maximum advance/retard
Dynamically balanced and quality checked for run-out tolerances

from

$49.99

With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:

Advance the cam for increased torque and horsepower
Tune your powerband for more end torque or increase top end horsepower
Includes (4) offset bushings and (1) 0 degree bushing
Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
Increase Top-End Horsepower

from

$10.99

11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring

from

$106.99

Product Features:

Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$32.99

Edelbrock part #7246 Intake Gaskets for 1967-1976 400-455 Buick allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology

Product Features:

1.15″x2.38″
Features Embossed Silicone Bead Around The Intake Ports & Water Openings
.032″ Thick
Two Piece Configuration
End Seals Not Included

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$226.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$258.99

HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.

Product Features:

HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
274/286 Advertised Duration, 230/236 Duration @ .050″, .490″/.490″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$199.99

Product Features:

Case-Hardened Tubing
Welded Ends
5/16 in. Diameter
Use with or without Hardened Steel Guideplates

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$149.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

from

$159.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$416.99

Cam & Lifter Kit, Oldsmobile V8 280 Magnum Hydraulic 1 Ea

from

$574.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$963.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
287/305 Advertised Duration, 235/249 Duration @ .050″, .489″/.476″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$223.99

VALVE SEALS, O-RING 11/32″ 1 ST

from

$33.99

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$89.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$81.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.130 inch, Compressed thickness 0.055 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core is excellent transfering heat away from hot spots in head preventing gasket burn-out.
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$42.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$109.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$75.99

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$77.99

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Grade 8 Steel

from

$433.99

These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Chevrolet V8 265-400 applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

Product Features:

CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
Designed for high performance street and race engines
Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
Additional clearance, up to 1.650″ O.D. valve spring

FAQs for 1987 Buick Regal Performance Engines

What are the best-selling Performance Engines for 1987 Buick Regals?

Out of 38 Performance Engines that fit 1987 Buick Regals, the following parts are the top sellers:

High Performance Thermostat (22903641) – $32.49
Valve Seals, Umbrella 11/32" 1 St (10214929) – $230.99
VALVE SEALS, 11/32" TEFLON 1 ST (10043400) – $223.99

What’s the price range for 1987 Buick Regal Performance Engines?

The prices of Performance Engines for the 1987 Buick Regal range from $7.99 up to $1,421.99 for the most premium parts.

What is the average price of a Performance Engine for a 1987 Buick Regal?

The average price for Performance Engines for the 1987 Buick Regal is $221.54. Keep in mind the variety of part types within our Performance Engine category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance Engines for other Buick Regal model years?

Yes, we carry Performance Engines for 30 model years of Buick Regals between 1973 and 2004. The following model years are the most popular for Performance Engine purchases: 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Performance Engines for my 1987 Buick Regal?

The cheapest 1987 Buick Regal Performance Engines we carry are:

High Energy 8.500" Long, 5/16" Diameter Pushrod (50289696) – $7.99
Engine Valve Spring (50286657) – $9.99
7 Degree Steel Retainer for 11/32" Valve with 1.437"-1.500" Spring (50289120) – $10.99
Pro Magnum Hydraulic Flat Lifter for Oldsmobile 260-455 and Pontiac 326-455. (50286488) – $15.99
Magnum 7.850" Long, .080" Wall, 5/16" Diameter Pushrod (50289636) – $17.99

Does Advance Auto Parts sell Performance Engines for any other 1987 Buick models?

Yes. We stock Performance Engines for 5 other popular 1987 Buick models. Some of the most popular are 1987 Century Performance Engines, 1987 LeSabre Performance Engines, 1987 Riviera Performance Engines, 1987 Electra Performance Engines, and 1987 Skylark Performance Engines.

What types of Performance Engines do you sell for my 1987 Buick Regal?

As of 3/1/26, these are some of the most in-demand types of Performance Engines for a 1987 Buick Regal:

Can I get help with 1987 Buick Regal Performance Engine orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Buick Performance Engines and more.

What is your return policy for Buick Regal Performance Engines?

Advance Auto Parts keeps returns simple. For new Buick Regal Performance Engines and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1987 Buick Regal Performance Engines

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Competition Cams – TIMING SET, HIGH TECH SMALL BLOCK CHEVY 1 EA (Part No.3100)

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Competition Cams – 11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring (Part No.712-1)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Edelbrock – Intake Manifold Gasket for 1967-1976 400-455 Buick (Part No.7246)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.12-230-2)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.12-246-3)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)

Competition Cams – PUSHROD SET, SBC 3/8 1 ST (Part No.7513-16)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Competition Cams – Cam & Lifter Kit, Oldsmobile V8 280 Magnum Hydraulic 1 Ea (Part No.CL42-231-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam K-Kit (Part No.K51-232-3)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-601-4)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Competition Cams – Valve Seals, O-Ring 11/32" 1 St (Part No.501-16)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5799G)

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1125)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)

Competition Cams – Rocker Arms, Ultra Gold Small Block Chevy 1.6 1 St (Part No.19002-16)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1200)

Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Competition Cams – ENG ROCKER ARM KIT (Part No.1441-KIT)

Competition Cams – ENGINE ROCKER ARM (Part No.1442-1)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)

Mr. Gasket – High Performance Thermostat (Part No.4365)