1987 BMW 535i Engine Internals

Essential 1987 BMW 535i Engine Internals

Goetze – Piston Ring Set (Part No.A2050243324GOE)

Piston Ring Set

from

$55.32
Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:
  • Maximum durability
  • High wear and corrosion resistance
  • Excellent heat-conducting capacity
  • Optimal fit
See More

National – Redi-Sleeve (Part No.99353)

Redi-Sleeve

from

$82.99
Redi-Sleeve

KS – KS Rod Bearing Set (Part No.A203026481KS)

KS Rod Bearing Set

from

$54.15
KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Low Wear and Friction
  • Advanced Surface Coatings
See More

Corteco – Crankshaft Seal (Part No.A8060184944CFW)

Crankshaft Seal

from

$39.74
Crankshaft Seal

National – Multi Purpose Seal (Part No.710785)

Multi Purpose Seal

from

$66.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Corteco – Crankshaft Seal (Part No.A8060390923CFW)

Crankshaft Seal

from

$35.91
Crankshaft Seal

Corteco – Crankshaft Seal (Part No.A806091566CFW)

Crankshaft Seal

from

$35.31
Crankshaft Seal

Driveworks – Crankshaft Seal (Part No.S-229005)

Crankshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Corteco – Crankshaft Seal (Part No.A8060663359CFW)

Crankshaft Seal

from

$31.58
Crankshaft Seal

Felpro – REAR MAIN SEAL SET (Part No.BS 40757)

REAR MAIN SEAL SET

from

$83.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

National – Multi Purpose Seal (Part No.229005)

Multi Purpose Seal

from

$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Glyco – Glyco Main Bearing Set (Part No.A201041520GLY)

Glyco Main Bearing Set

from

$162.18
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:
  • Original Equipment Quality
  • Excellent wear resistance
  • Low propensity to seize
  • Reduction in Friction
See More

Kolbenschmidt – Main Bearing Set (Part No.A20101807058KS)

Main Bearing Set

from

$78.50
KS crankshaft main bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS main bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Low Wear and Friction
  • Advanced Surface Coatings
See More

1987 BMW 535i Engine Internals

Maybe you’re in the middle of a full rebuild of that 1987 BMW 535i. Maybe you just need a couple of Engine Internals. Either way, Advance Auto Parts has 7 different Engine Internals in our inventory ranging from $23.99 to $162.18. That means you can find the exact parts or products you need to keep that 1987 BMW 535i running smoothly.

Engine Internals are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1987 BMW 535i. National, KS, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Internals for your 1987 BMW 535i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Internals to keep your 1987 BMW 535i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Internals Brands To Make Your 1987 BMW 535i Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 BMW 535i demands trusted brand parts and products to keep it running. Many trusted brands of Engine Internals make up Advance Auto Parts’ inventory, and all are ready to help make your 535i the best it can be. Be sure to browse some of our top Engine Internals brands and parts.

FAQs for 1987 BMW 535i Engine Internals

What are the most purchased Engine Internals for the 1987 BMW 535i?

Out of 7 Engine Internals for the 1987 BMW 535i, the most popular in our inventory are:
Multi Purpose Seal
from $39.99
This product is not rated
Multi Purpose Seal
Crankshaft Seals
KS Rod Bearing Set
from $54.15
This product is not rated
KS Rod Bearing Set
Standard Rod Bearing Sets
Redi-Sleeve
from $82.99
This product is not rated
Redi-Sleeve
Main Bearing Repair Sleeves