1987 BMW 528E Brake Parts

Name: Vacuum Brake Booster: Without Master Cylinder
Brand: Wearever
SKU: 53-2601
Price: 99.99 USD

Below you will find various in-demand BMW Brake Parts, components and accessories for your 1987 528E. Advance Auto Parts has popular 528E parts like Brake Rotors and Drums, Brake Hoses, Brake Pads and Shoes and more. You’ll also find aftermarket and OEM Brake Parts for other 528E model years including 1982, 1983, 1984, 1985, 1986, 1988 and more. Select a category of 1987 BMW 528E Brake Parts below and start saving instantly.

Popular 1987 BMW 528E Brake Parts Categories

Front Brake Rotors

Rear Brake Rotors

Rear Brake Pads and Shoes

Parking Brake Pads and Shoes

Power Brake Boosters

Brake Caliper Bolt and Pins

Brake Caliper Guide Pin Boot Kits

Brake Master Cylinders

Brake Wear Sensors

Brake Hoses

Brake Hardware Kits

Master Cylinder Caps and Gaskets

Power Brake Booster Check Valves

Brake Hydraulic Line Junctions

Brake Caliper Kits

Brake Anti-Rattle Springs

Disc Brake Caliper Guide Pin Bushings

Essential Brake Parts for 1987 BMW 528Es

from

$99.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$63.07

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$28.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$20.00

ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:

Reduced cost
OE Quality
Complete Kit

from

$481.87

As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:

Short closing paths
Low volume uptake
High efficiency
Low throttling / after-suction resistance
Low pressure differential between primary and secondary circuits
Good bleedability
Cr6-free surfaces for vehicles built from July 2007 (as required by law)
Central valve version suitable for ABS
Compact design – ideal for installation in small spaces
Reduced weight – by roughly 20% compared to conventional central valve technology
Fewer components – almost half as many as compared to conventional technologies
Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
Low volume uptake – minimized elastic deformations due to smaller seals
Sealing cups supported in the housing – robustness against soiling and wear; longer life
Cr6-free surfaces for vehicles built from July 2007 (as required by law)

from

$20.78

Brake Line Junction

from

$43.33

Booster Check Valve

from

$16.79

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$7.51

Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:

Exact Replacement with OE Fittings and Connectors
Highly Durable and Resistant to Temperatures
Supplied with OE style electrical connectors
Bowa is an OE supplier to Brake and Vehicle Manufacturers

from

$31.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$22.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$15.29

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$13.69

This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.

from

$25.63

ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.

from

$6.79

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$13.16

FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

from

$26.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$20.73

All WBR hydraulic hoses are manufactured to match the exact OE fit, OE construction, to ensure quick and easy installation, as well as trouble-free functionality for the life of the hose. WBR brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
Very high ozone resistance, temperature change resistance and so a long service life
Low water permeation and so extended service life of the brake fluid
Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.

from

$25.49

This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.68

The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$38.82

Brake Reservoir Cap

from

$72.25

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

OE-Equivalent and a direct fit replacement
Made of special cast iron with high carbon content
Pillar Venting Technology (Vented Rotors Only)
Easy Check wear indicator system
Provides a higher friction coefficient.
Resistant to vibrations and noise.

from

$61.71

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$15.79

Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$10.68

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Upgrade your 1987 BMW 528E with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1987 BMW 528E, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Brake Parts are key to keeping your 528E functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Brake Parts for the 1987 BMW 528E, designed to meet your needs without breaking the bank. From Brake Rotors and Drum replacements to Brake Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1987 BMW 528E at great prices. Our Brake Parts inventory for this model ranges from just $6.53 to $481.87, with an average price of $52.18. Our 38 Brake Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1987 BMW 528E without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 BMW 528E, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Dorman, and more. Carquest Brake Parts start at just $6.79 and boast an impressive 4 stars average rating from customers. With 83 customer reviews and counting, our 1987 BMW 528E Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1987 BMW 528E is always ready to roll. We’re committed to providing you with everything you need to keep your 528E in top shape, all in one place. Start shopping confidently below for your 1987 BMW 528E!

Best-Selling Brake Rotors and Drums for 1987 BMW 528Es

Enhance the driving experience in your BMW with 4 quality Brake Rotors and Drum components, starting at $61.71.

show more show less

from

$61.71

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$72.25

OE-Equivalent and a direct fit replacement
Made of special cast iron with high carbon content
Pillar Venting Technology (Vented Rotors Only)
Easy Check wear indicator system
Provides a higher friction coefficient.
Resistant to vibrations and noise.

from

$72.78

Brake Disc

from

$63.07

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

Top Picks for 1987 BMW 528E Brake Pads and Shoes

Upgrade BMW 528Es with top-quality Brake Pads and Shoes parts, including 11 OEM and aftermarket selections for your 1987 model.

show more show less

from

$22.99

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$22.99

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$16.79

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$46.22

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$60.24

Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:

OE-Equivalent and Direct Fit application.
OE style rubber-core shims
Advanced, platform-specific Semi Metallic formulation
Dedicated engineers source and rigorously test all friction materials and formulations
Manufactured under the same exacting quality standards as OE components and system
Powder-coated backing plate
Rigorous physical and dynamometer testing
Synthetic lubricant in box
Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
Provides maximum stability resulting in quieter shim performance over the life of the pad

from

$37.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$31.99

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$26.99

Disc Brake Pad Wear Sensor

from

$16.79

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$7.51

Exact Replacement with OE Fittings and Connectors
Highly Durable and Resistant to Temperatures
Supplied with OE style electrical connectors
Bowa is an OE supplier to Brake and Vehicle Manufacturers

from

$6.53

PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:

Exact Replacement with OE Fittings and Connectors
Resistant to Extreme High Heat
Highly Durable
Supplied with all required hardware
PEX is an OE supplier to Brake and Vehicle Manufacturers

In-Demand Brake Kits for 1987 BMW 528Es

Select from 5 premium Brake Kits parts for your 1987 BMW 528E, with prices ranging from $6.79 to $25.63.

show more show less

from

$15.29

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$6.79

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$25.63

from

$13.69

This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.

from

$13.16

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

Most Sold 1987 BMW 528E Brake Calipers

Explore our best-selling BMW parts for the 1987 528E among 5 OEM and aftermarket options starting from $7.49.

show more show less

from

$7.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$25.49

Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.95

Caliper Guide Pin

from

$20.00

Reduced cost
OE Quality
Complete Kit

from

$10.68

The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Top-Rated Brake Parts Brands For Your 1987 BMW 528E

Shop for the best-rated brands offering Brake Parts and other products for your 1987 BMW 528Es. Below you’ll find some of our best rated Brake Parts from Carquest and Dorman, and more. Brake Parts from these brands that fit a 1987 528E start at just $6.79 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1987 BMW 528E Brake Parts

When it comes to maintaining or upgrading your 1987 BMW 528E, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1987 BMW 528E. With over 11 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.79, with an average price of just $30.55. Plus, with over 43 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.99

This product is not rated

Parking Brake Shoes

“”

from
$149.99

This product is not rated

New Brake Master Cylinder: Without Reservoir, Exact Fit, 7/8" Bore

“”

from
$26.99

This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

Popular Dorman 1987 BMW 528E Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1987 BMW 528E owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1987 528E, Advance Auto Parts carries a full inventory of 1 Dorman Brake Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Dorman Brake Parts range up to $25.49, plus, with more than 40 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$25.49

(40)

Oversized Brake Caliper Bolt

“Had my caliper bolt strip on my mk4 Jetta. This oversized caliper bolt not only saved me from having to buy a knuckle, but made the repair painless an”

FAQs for 1987 BMW 528E Brake Parts

Which Brake Parts are best-sellers for 1987 BMW 528Es?

Out of 38 Brake Parts that fit 1987 BMW 528Es, the following parts are the top sellers:

Brake Hose Assembly: Copper Washers Included (18650619) – $20.99
Brake Pads: Reliable and Dependable Stopping (5758351) – $22.99
Brake Hose Assembly: Copper Washers Included (18650618) – $26.99

What’s the price range for 1987 BMW 528E Brake Parts?

Brake Part prices for the 1987 BMW 528E start at $6.53 and go up to $481.87 for the most premium parts.

What’s the average price of a Brake Part for a 1987 BMW 528E?

The average price for Brake Parts for the 1987 BMW 528E is $52.18. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other BMW 528E model years?

Yes, we currently carry Brake Parts for 6 model years of BMW 528Es between 1982 and 1988. Brake Parts are bought most frequently for the following model years: 1988, 1986, 1985, 1984, 1983, and 1982.

What are the cheapest Brake Parts for my 1987 BMW 528E?

The cheapest 1987 BMW 528E Brake Parts we carry in stock are:

Brake Pad Wear Sensor (10847690) – $6.53
Disc Brake Caliper Repair Kit (10279107) – $6.79
Disc Brake Caliper Guide Pin Kit (10168234) – $7.49
Brake Pad Wear Sensor (11487610) – $7.51
Anti Rattle Spring / Clip (11032809) – $10.68

What are the top-rated Brake Parts that fit the 1987 BMW 528E?

Out of 83 reviews by customers, our 1987 BMW 528E Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1987 BMW 528E and their top-rated products:

Brake Pads and Shoes
- Brake Pads: Reliable and Dependable Stopping (5758904) – $22.99
- Brake Pad Wear Sensor (18023759) – $16.79
- Brake Pads: Reliable and Dependable Stopping (5758351) – $22.99
Brake Hoses
- Brake Pads: Reliable and Dependable Stopping (5758904) – $22.99
- Brake Pad Wear Sensor (18023759) – $16.79
- Brake Pads: Reliable and Dependable Stopping (5758351) – $22.99

What types of Brake Parts do you sell for my 1987 BMW 528E?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1987 BMW 528E:

Can I get help with 1987 BMW 528E Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Brake Parts and more.

What is your return policy for BMW 528E Brake Parts?

Advance Auto Parts keeps returns simple. For new BMW 528E Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1987 BMW 528E Brake Parts

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2601)

Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000178627ZIM)

Carquest Wearever – Parking Brake Shoes (Part No.S817)

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

ATE – ATE Brake Master Cylinder (Part No.N300019759ATE)

ATE – Brake Line Junction (Part No.N3084670625ATE)

ATE – Booster Check Valve (Part No.N4030459144ATE)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1089)

Bowa – Brake Pad Wear Sensor (Part No.N1030267612BOW)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD279)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

ATE – Parking Brake Hardware Kit (Part No.N5005193949ATE)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15039)

FTE – Brake Caliper Repair Kit (Part No.N105084004FTE)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

World Brake Resources – WBR Brake Hose (Part No.N700028617WBR)

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)

ATE – Brake Reservoir Cap (Part No.N303078386ATE)

Brembo – High Carbon Brake Disc (Rotor) (Part No.N1000266889BRE)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000266889ZIC)

ATE – Anti Rattle Spring / Clip (Part No.N106978353ATE)

ATE – Anti Rattle Spring / Clip (Part No.N106978356ATE)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000266889ZIC)

Brembo – High Carbon Brake Disc (Rotor) (Part No.N1000266889BRE)

ATE – Brake Disc (Part No.N1000178627ATE)

Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000178627ZIM)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

World Brake Resources – WBR Brake Hose (Part No.N700028617WBR)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD279)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD395)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1089)

World Brake Resources – Ceramic Brake Pads (Part No.N1010415256WBR)

Bosch – QuietCast Premium Brake Pads w/ Shims (Part No.N1010441081BOS)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-279)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Carquest Premium – Disc Brake Pad Wear Sensor (Part No.WSA3913)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1087)

Bowa – Brake Pad Wear Sensor (Part No.N1030267612BOW)

Pex – Brake Pad Wear Sensor (Part No.N1030267612PEX)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15039)

ATE – Parking Brake Hardware Kit (Part No.N5005193949ATE)

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

FTE – Brake Caliper Repair Kit (Part No.N105084004FTE)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Autopart International Inc – Caliper Guide Pin (Part No.N10451913325API)

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)