1987 BMW 325ES Fuel and Emissions Systems

Essential 1987 BMW 325ES Fuel and Emissions Systems

Sangsin – Brake Pad Set (Part No.N1010948758SBC)

Brake Pad Set

from

$77.79
Brake Pad Set

MTC – MTC Air Mass Meter Boot (Part No.B313234889MTC)

MTC Air Mass Meter Boot

from

$27.13
The MTC Air Mass Meter Intake boots meets or exceed the quality, fit and performance of the original equipment it replaces.

Product Features:
  • Flexibility and vacuum stability thanks to folds and ribs
  • Noise-dampened with specific stiffening
  • Integration of pressure and/or temperature sensors
  • Will not lose structural durability at high temperatures
See More

Bosch – MAP Sensor (Part No.C704435966BOS)

MAP Sensor

from

$556.04
Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:
  • Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
  • Bosch continually improves its MAP sensor designs with the latest chip technology.
  • Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)
See More

Bosch – Oxygen Sensor: 3 Wire, 28.54" Long, Heated, Universal (Part No.15735)

Oxygen Sensor: 3 Wire, 28.54" Long, Heated, Universal

from

$79.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Bosch – Fuel Injector Seal (Part No.C101016838BOS)

Fuel Injector Seal

from

$2.06
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More

Elaplast – Crankcase Breather Hose (Part No.B201036495ELA)

Crankcase Breather Hose

from

$16.03
Air hoses and lines for diesel and gasoline engines with additional blow-by for crankcase ventilation. Prefabricated modules in raw and clean air duct using injection-molded elastomer and plastic items, and blow-molded items.

Product Features:
  • Mount for temperature sensors
  • Noise damping
  • Folds and ribs for flexibility and vacuum stability
  • Molded-on mounts for wires or cables
  • Integrated flow divider
  • Integrated positioning and attachment of prefabricated hose clamps
  • Radial reinforcement for high vacuum stress in tight installation spaces
See More

Bosch – Relay (Part No.P2020313472BOS)

Relay

from

$15.10
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More

Programa – Programa Idle Control Unit (Part No.C404017197PRO)

Programa Idle Control Unit

from

$253.15
Remanufactured w/Core Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured electronic control units. Remanufacturing Process

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ECU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Carquest Premium – Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10582)

Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Febi-Bilstein – Fuel Tank (Gas) Cap (Part No.E201066969FEB)

Fuel Tank (Gas) Cap

from

$32.79
Febi Fuel Tank Caps are manufactured to meet OE quality, and performance for reliable operation.

Product Features:
  • Meets OE vehicle standards
  • Factory type retaining strap for user convenience
  • OE quality seal ensures fuel tank emissions are maintained preventing check engine warnings.
See More

Dorman – Steel Fuel Tank (Part No.E200017556DOR)

Steel Fuel Tank

from

$515.13
Painted for an extra layer of corrosion protection, Dorman’s Fuel Tanks are resilient against salt and other elements that make the undercar environment a harsh one.

Product Features:
  • Solid steel construction ensures long-lasting performance
  • Lock ring and gasket included (where applicable)
  • Rust resistant
  • Direct replacement for a proper fit every time
  • Quality tested for durability
See More

Spectra Premium – Fuel Tank (Part No.BM1A)

Fuel Tank

from

$355.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)

Fuel Injector Seal Kit

from

$4.29
Product Features:
  • Premium OE quality materials
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1115)

Remanufactured Fuel Injector

from

$44.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Idle Air Control Valve (Part No.AEA1089)

Idle Air Control Valve

from

$677.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Fuel Injection Idle Air Control Valve (Part No.50563)

Fuel Injection Idle Air Control Valve

from

$1833.95
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our high strength stepping motors produce the highest output torques and shielded ball bearing in the motor resists the environmental contaminates for an extended service life
  • Our IACs undergo load testing to ensure the actuator delivers a force greater than actual load for extra durability and peak performance
  • Manufactured with the highest grade materials for prolonged life and superior performance
  • BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

VDO – Fuel Pump Tank Seal (Part No.E300462593VDO)

Fuel Pump Tank Seal

from

$4.98
Fuel Pump Tank Seal

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings

from

$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

1987 BMW 325ES Fuel and Emissions Systems

You count on your 1987 BMW 325ES to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 31 Fuel and Emissions Systems ranging in price from $2.06 to $1,833.95, you’re sure to find everything you need for your 1987 BMW 325ES.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Delphi, Carquest Premium, and ACDelco. 1987 BMW 325ES Fuel and Emissions Systems start as low as $2.06!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1987 BMW 325ES Fuel and Emissions Systems.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1987 BMW 325ES below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1987 BMW 325ES

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 BMW 325ES running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, ACDelco, and even more.

Popular Carquest Fuel and Emissions Systems

You’ll find popular Carquest brand products across Idle Air Control Parts. All are waiting to get your 1987 BMW 325ES back on the road. Some of the top-rated Carquest products in these categories are:
Fuel Injection Idle Air Control Valve
from $1833.95
(1)
Fuel Injection Idle Air Control Valve
Fuel Injection Idle Air Control Valves

FAQs for 1987 BMW 325ES Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1987 BMW 325ES?

Out of 31 Fuel and Emissions Systems for the 1987 BMW 325ES, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings
from $10.29
This product is not rated
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings
Fuel Injector Seal Kits
Fuel Injector Seal Kit
from $4.29
This product is not rated
Fuel Injector Seal Kit
Fuel Injector O-Ring Kits