1986 Pontiac Sunbird Steering and Chassis Parts
More 1986 Pontiac Sunbird Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1986 Pontiac Sunbird, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1986 Pontiac Sunbird Steering and Chassis Parts
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Powercraft – Upper Pinion Bearing Kit (Part No.8571)
from
$34.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Steering Tie Rod End (Part No.DW-ES2217R)
from
$9.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Cardone – Power Steering Pump (Part No.20-6800F)
from
$85.99
CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the origi
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Steering Tie Rod End Bushing (Part No.DW-EV119)
from
$5.79
Driveworks tie rod end bushings are high-quality, cost-effective parts, and they provide mobility to the joint as you turn your steering wheel. Worn bushings can dramatically affect your wheel alignment. Driveworks chassis parts ensure improved steering response and durability.
See More
Rare Parts – Rack & Pinion Bellows (Part No.RP27130)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620662)
from
$89.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$8.99
Camber Bolt Kit
MOOG – Stabilizer Bar Link Kit (Part No.K700532)
from
$18.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- The Grade 8 coated bolt makes the link extremely durable
- Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
- Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
- Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
- Black phosphate barrel nut and washers provide corrosion protection.
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Return Hose Assembly (Part No.39928)
from
$34.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
ACDelco – Professional Ball Joint (Part No.L2020588371ACD)
from
$64.65
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.
Product Features:
See More
Product Features:
- Superb strength and durability thanks to precision manufactured housing and components
- Advanced corrosion protection against the harshest conditions
- Permanently attached boot reduces contamination, makes installation easier
- Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
- No spring means no end play, easier installation
- One-piece forged housing for easier steering
Rare Parts – Tie Rod Sleeve (Part No.RP27222)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
MOOG – Alignment Shim (Part No.K995-1)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Powercraft – Pump Seal Kit (Part No.8624)
from
$26.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Tie Rod End (Part No.DW-ES681N)
from
$14.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Carquest Premium – Pressure Hose Assembly (Part No.35703)
from
$72.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
MOOG – Camber Adjusting Kit (Part No.K928)
from
$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Cardone – Rack and Pinion Assembly (Part No.23-1609)
from
$208.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Energy Suspension – Sway Bar End Link Kit (Part No.9.8117G)
from
$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Energy Suspension – SwyBarLink (Part No.9.8164G)
from
$25.99
SwyBarLink
Powercraft – Rack Pinion Seal Kit (Part No.8582)
from
$76.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Popular 1986 Pontiac Sunbird Steering and Chassis Parts Categories
1986 Pontiac Sunbird Steering and Chassis Parts
You count on your 1986 Pontiac Sunbird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 69 Steering and Chassis Parts ranging in price from $2.99 to $434.99, you’re sure to find everything you need for your 1986 Pontiac Sunbird.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Imperial, Cardone, and Driveworks. 1986 Pontiac Sunbird Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 3,268 extensive product reviews on 1986 Pontiac Sunbird Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Suspension Stabilizer Bar Link Kit with 4.5 stars and Bulk – 3/8" I.D. Return Hose CPE with 4.4 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1986 Pontiac Sunbird below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1986 Pontiac Sunbird
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Pontiac Sunbird running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Driveworks, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Camber Kits and Sway Bars. All are waiting to get your 1986 Pontiac Sunbird back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1986 Pontiac Sunbird, and some of our most reviewed Imperial parts include:
FAQs for 1986 Pontiac Sunbird Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1986 Pontiac Sunbird?
Out of 69 Steering and Chassis Parts for the 1986 Pontiac Sunbird, the most popular in our inventory are:
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 1986 Pontiac Sunbird Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1986 Pontiac Sunbird based on customer reviews/ratings are:
from
$8.99
(4)
Camber Bolt Kit
“Worked fine. 4 stars because I had to put the pinned washer on the thread side instead of the bolt side. Not sure it makes much difference and didn'”
