1986 Nissan Maxima Wheels and Tires
More 1986 Nissan Maxima Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1986 Nissan Maxima, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1986 Nissan Maxima Wheels and Tires
Beck/Arnley – Hub & Bearing Assembly (Part No.051-6349)
from
$254.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Wheel and hub comes complete including ABS ring or sensor if applicable
- Axle nut included if applicable
- High quality construction with premium materials for durability
- Application specific for this vehicle
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510009)
from
$35.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Dorman – Serrated Wheel Stud (Part No.O8060126384DOR)
from
$3.39
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Corrosion resistant
- Double-ended studs as well as serrated bolts, and wheel bolts available
- Over-length and under-length studs available for convenience and ease of installation
Dorman – Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread (Sold by each) (Part No.610-320)
from
$2.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
MOOG Hub Assemblies – HUB ASSEMBLY (Part No.512388)
from
$216.99
Product Features:
See More
- RELIABLE PERFORMANCE – Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
NSK – Wheel Bearing (Part No.K800020275NSK)
from
$18.99
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Premium modified bearing steel
- Optimized sealing systems
Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512367)
from
$70.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
Driveworks – Wheel Hub (Part No.930-703)
from
$94.99
DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
Driveworks – Wheel Hub (Part No.930-982)
Driveworks – Wheel Hub (Part No.930-700)
from
$49.99
DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
McGard – Chrome Cone Seat Style Lug Nut (M12 x 1.25 Thread Size) – Box of 100 Lug Nuts (Part No.69403)
from
$354.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 100.
McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65554CN)
from
$154.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks & 1 Key
- Clamshell packaging.
Dorman – Wheel Lug Nut: M12-1.25 Thread, Conical 60, Bulge Acorn, 1.41" Length, Chrome, 4 Pack (Part No.711-405)
from
$8.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-455)
from
$39.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.25 Thread Size) (Part No.84554)
from
$94.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Chrome SplineDrive 4 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65454CN)
from
$134.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 12 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, & 1 Key
- Clamshell packaging.
Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)
from
$462.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.25 Thread Size) – Set of 4 Locks and 1 Key (Part No.24154)
from
$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
Dorman – Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Tuner, 1.297" Length, Chrome, 20 Locks/1 Key (Part No.711-445)
from
$33.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Tuner, 1.311" Length, Chrome, 4 Locks/1 Key (Part No.711-425)
from
$20.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3040)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 315 MHz TPMS Universal with metal valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Chrome Std. Mag 2-Pc M12-1.25, Hex (Part No.711-448)
from
$55.99
Our Wheel Nuts and Locks are easy to use and engineered to last . Durably designed with a chrome finish, they blend in with the overall design of your car, offering optimal security and appearance.
Product Features:
See More
Product Features:
- Constructed of high-quality steel
- Resistant to rust, warping, and stripping
- Multiple lock designs available
- Quality-tested to ensure performance and durability
McGard – Black SplineDrive Lug Nuts (M12 x 1.25 Thread Size) – Set of 4 Lug Nuts (Part No.65354BK)
from
$44.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65100 Or 65300 Installation Tool sold separately
McGard – Chrome Cone Seat Style Lug Nut Set (M12 x 1.25 Thread Size) – Set of 4 Lug Nuts (Part No.64003)
from
$22.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Popular 1986 Nissan Maxima Wheels and Tires Categories
1986 Nissan Maxima Wheels and Tires
You count on your 1986 Nissan Maxima to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 46 Wheels and Tires ranging in price from $1.79 to $361.99, you’re sure to find everything you need for your 1986 Nissan Maxima.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 8 different brands like Dorman, Schrader, and DriveWorks. 1986 Nissan Maxima Wheels and Tires start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 154 extensive product reviews on 1986 Nissan Maxima Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Bearing: Direct Fit, 1 Piece with 3.6 stars and Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key with 3.1 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1986 Nissan Maxima below to get started!
Top-Rated Wheels and Tires Brands For Your 1986 Nissan Maxima
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Nissan Maxima running right for years to come. In our inventory you’ll find brands like Dorman, Schrader, DriveWorks, and even more.
Popular Driveworks Wheels and Tires
You’ll find popular Driveworks brand products across Wheel Bearings. All are waiting to get your 1986 Nissan Maxima back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1986 Nissan Maxima, and some of our most reviewed parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 1986 Nissan Maxima Wheels and Tires
What are the most purchased Wheels and Tires for the 1986 Nissan Maxima?
Out of 46 Wheels and Tires for the 1986 Nissan Maxima, the most popular in our inventory are:
from
$3.99
This product is not rated
Wheel Nut M12-1.25 Acorn – 13/16 In. Hex, 35mm Length
Wheel Lug Nuts
from
$4.29
This product is not rated
Wheel Nut M12-1.25 Acorn – 21mm Hex, 29mm Length
Wheel Lug Nuts
from
$2.99
This product is not rated
Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread (Sold by each)
Wheel Studs
What are the top-rated 1986 Nissan Maxima Wheels and Tires?
Top-rated Wheels and Tires for your 1986 Nissan Maxima based on customer reviews/ratings are:
from
$98.99
(11)
Wheel Bearing: Direct Fit, 1 Piece
“Some of the other reviews said this bearing failed prematurely. I am willing to bet that they did not replace the packing grease that was in it with ”
from
$39.49
(7)
Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
“Great product”
from
$3.99
(5)
Wheel Lug Nut: M12-1.25 Thread, Conical 60, Acorn, 1.142" Length, Chrome, 1 Pack
“perfect fit”
