1986 Jeep Wagoneer Drive Shafts and Axles

Essential 1986 Jeep Wagoneer Drive Shafts and Axles

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9776)

Drive Shaft: Not Greasable, Direct Replacement

from

$522.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

National – Bearings (Part No.1308-L)

Bearings

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

NTN – Axle Shaft Bearing (Part No.K4010161677NTN)

Axle Shaft Bearing

from

$90.72
Axle Shaft Bearing

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)

Axle Bearing Retainer For Dana 44 Rear In Jeep TJ

from

$32.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 in Jeep TJ
  • 1 5/8″ x 3 3/16″ bolt pattern
  • 3/16″ bolt holes
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Carquest Premium – Extreme Duty CV Axle (Part No.NCV545841XD)

Extreme Duty CV Axle

from

$219.99
Manufactured to be an OE replacement with the addition of eXtreme Duty outer boots designed to withstand extreme low temperatures and resist impact tears. CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:
  • Thermoplastic Outboard Boots
  • All New Materials
  • Boots Performance Tested to -50F
  • Moly-Blend Grease in inner and outer joints
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV545841)

CV Axle Shaft Assembly

from

$188.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-5131)

Oil Seal

from

$9.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Inner Axle Seal For Dana 44 (Flanged Axle) (Part No.30303)

Replacement Inner Axle Seal For Dana 44 (Flanged Axle)

from

$7.99
Replacement inner axle seal for Dana 44 (flanged axle) .Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits Dana Spicer 44 rear with flanged axle
See More

National – Bearings (Part No.B-228)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 44 Outer Stub Axle Replacement (Part No.21108)

Dana 44 Outer Stub Axle Replacement

from

$179.99
Yukon 1541H replacement outer stub axle shaft for Dana 44, ’71-’79 Ford Bronco with a length of 9.72 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
  • Outer stub
  • 19 spline
  • 9.72″ from end of splines to center of u-joint bore
See More

Yukon Gear – 4340 Chrome Moly Outer Stub For GM Truck & Blazer And Jeep Wagoneer With Disc, Uses 5-760X U/Joint (Part No.21355)

4340 Chrome Moly Outer Stub For GM Truck & Blazer And Jeep Wagoneer With Disc, Uses 5-760X U/Joint

from

$249.99
4340 Chrome Moly outer stub for GM truck & Blazer and Jeep Wagoneer with disc breakes. 19 spline, 9.94″. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
  • 4340 Chromoly
  • Outer stub
  • 19 spline
  • 9.94″ from end of splines to center of u-joint bore
See More

Yukon Gear – Axle Spacer For Dana 44 19 Spline & Amc Model 20 – Standard & Trac Loc, Not Powr Lok (Part No.33535)

Axle Spacer For Dana 44 19 Spline & Amc Model 20 - Standard & Trac Loc, Not Powr Lok

from

$32.99
Product Features:
  • Axle spacer button
  • Fits Dana 44 with 19 spline axles and AMC Model 20
  • Trac Loc positraction only
See More

Yukon Gear – Model 20 Axle End Play Shim (Part No.55060)

Model 20 Axle End Play Shim

from

$9.29
Model 20 0.003″ axle end play shim.

Product Features:
  • Axle end play shim for AMC Model 20
  • 0.003″ thick
See More

Yukon Gear – Model 20 Axle End Play Shim (Part No.55061)

Model 20 Axle End Play Shim

from

$8.99
Model 20 0.005″ axle end play shim.

Product Features:
  • Axle end play shim for AMC Model 20
  • 0.005″ thick
See More

Yukon Gear – Yoke For Model 20 With A 1310 U/Joint Size (Part No.41096)

Yoke For Model 20 With A 1310 U/Joint Size

from

$149.99
Yukon yoke for Model 20 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits AMC Model 20
  • 28 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

National – Bearings (Part No.SCH-1810)

Bearings

from

$18.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

1986 Jeep Wagoneer Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1986 Jeep Wagoneer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 49 different Drive Shafts and Axles in our inventory ranging from $5.99 to $883.99. That means you can find the exact parts or products you need to keep that 1986 Jeep Wagoneer running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Jeep Wagoneer. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1986 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 172 reviews in this category, some of the top rated parts include Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1986 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1986 Jeep Wagoneer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1986 Jeep Wagoneer, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints

Top 1986 Jeep Wagoneer Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1986 Jeep Wagoneer. Popular National parts include:
Multi Purpose Seal
from $18.99
(14)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $17.49
(4)
Multi Purpose Seal
Axle Shaft Seals
Bearings
from $21.79
(1)
Bearings
Drive Shaft Bearings

FAQs for 1986 Jeep Wagoneer Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1986 Jeep Wagoneer?

Out of 49 Drive Shafts and Axles for the 1986 Jeep Wagoneer, the most popular in our inventory are:
CV Axle Shaft Assembly
from $94.99
(14)
CV Axle Shaft Assembly
Drive Shaft and Axles
Drive Shaft Pinion Yoke
from $117.99
This product is not rated
Drive Shaft Pinion Yoke
Drive Shaft Slip Yoke Sleeves
Bearings
from $14.79
This product is not rated
Bearings
Rear Axle Shaft Bearings

What are the top-rated 1986 Jeep Wagoneer Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1986 Jeep Wagoneer based on customer reviews/ratings are:
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”