1986 GMC C2500 Intake Manifold Parts

Essential 1986 GMC C2500 Intake Manifold Parts

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Air Charge Temperature Sensor

from

$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1078)

Air Charge Temperature Sensor

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90240)

INTAKE MANIFOLD GASKET SET

from

$22.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

ACDelco – GM Original Equipment Intake Manifold Gasket Set (Part No.A8043204595ACD)

GM Original Equipment Intake Manifold Gasket Set

from

$50.44
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:
  • Both upper and lower intake manifolds with matching gaskets sets available.
  • Only ACDelco and GM offer complete later model GM coverage.
  • Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 95826)

Engine Intake Manifold Gasket Set

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MIK 98000 T)

Engine Intake Manifold Gasket Set

from

$59.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Included all parts needed to complete the repair
  • Included all parts needed to complete the repair
See More

Edelbrock – Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy (Part No.7215)

Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy

from

$47.99
Edelbrock part #7215 Intake Gaskets for 1958-1986 E-Tec 200 Small-Block Chevy allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Microp

Product Features:
  • 1.26″x2.24″
  • E-Tec Port Style
  • .120″ Thick
  • Two Piece Configuration
  • Composite Material
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98000 T)

Engine Intake Manifold Gasket Set

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Victor Reinz – Engine Intake Manifold Bolt Set (Part No.16-10001-01)

Engine Intake Manifold Bolt Set

from

$46.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Bolt Kit Intake Hex Head

from

$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:
  • Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
  • 3/8 inch-16 by 1 inch bolts
  • Kit includes 12 bolts and washers
  • Manufactured from high quality steel
  • Bolts feature hex heads
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)

For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers

from

$65.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Wont Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72224)

Engine Intake Manifold Bolt Set

from

$41.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)

For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers

from

$63.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)

Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs

from

$284.99
Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i
See More

Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)

Pro-Flo XT Small Block Chevy EFI Black Intake Manifold

from

$711.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

from

$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Holley – Manifold; SBC Early DP TBI EGR (Part No.300-49)

Manifold; SBC Early DP TBI EGR

from

$377.99
Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

Product Features:
  • High Rise Dual Plane Design
  • Holley Pro-Jection Tbi Mounting Flange
  • Erg Provisions
See More

Dorman – Upper Plastic Intake Manifold – Includes Gaskets (Part No.615-181)

Upper Plastic Intake Manifold - Includes Gaskets

from

$93.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – tested to ensure top-quality OEM performance and durability.
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

Holley – Intake Manifold (Part No.300-5)

Intake Manifold

from

$363.99
Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion. Holley’s products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress-up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl’s, Holley products can give you the edge you need over the competition.

Product Features:
  • Single Plane/Open Plenum Design
  • Deep Plenum Design With Isolated Runners
  • 4150 Square Bore Carburetor Mounting Flange
  • Power Band 4500-8500 rpm
  • Height Front 4.77 in. Rear 6.16 in.
  • Port Size 2.30 in. Height 1.60 in. Width
  • 50 State Legal
See More

Holley – Intake Manifold (Part No.300-4)

Intake Manifold

from

$355.99
Holley Intake Manifolds feature a cast aluminum construction and have a long tradition of being one of the best products on the market. Review the information below for Holley intake specifications.

Product Features:
  • Single Plane/Open Plenum Design
  • Deep Plenum Design With Isolated Runners
  • 4150 Square Bore Carburetor Mounting Flange
  • Power Band 4500-8500 rpm
  • Height Front 4.75 in. Rear 6.25 in.
  • Port Size 1.85 in. Height 1.60 in. Width
See More

Edelbrock – Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2023)

Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy

from

$900.99
The Edelbrock #2023 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • Performer RPM Manifold
  • Made In The USA
See More

Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)

Performer RPM Small Block Chevy Polished Intake Manifold

from

$578.99


Product Features:
  • Polished Version Of Edelbrock PN[7101]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – RPM Air-Gap Big Block Chevy 2-R Black Intake Manifold (Part No.75621)

RPM Air-Gap Big Block Chevy 2-R Black Intake Manifold

from

$803.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retai

Product Features:
  • Polished Version of Edelbrock PN[7562]
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – C-26 Small Block Chevy Dual-Quad Intake Manifold (Part No.5425)

C-26 Small Block Chevy Dual-Quad Intake Manifold

from

$504.99
Product Features:
  • Designed for 1500 to 5500 RPM Performance
  • Low Profile for Hood Clearance on Most Vehicles
  • Air-Conditioning/Front Oil Tube Bosses Included
  • Stock Alternator Brackets Do Not Fit
  • Use Edelbrock Fuel Line Kit PN[8088] w/Our Carbs
  • Carburetor Center-to-Center Dimensions = 6-7/16 in
  • Use Edelbrock Linkage Kit PN[7094] w/Our Carbs
  • Best Matched with Edelbrock 500 cfm Carburetors
See More

Edelbrock – Performer RPM Big Block Chevy 2-R Intake Manifold (Part No.7163)

Performer RPM Big Block Chevy 2-R Intake Manifold

from

$391.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6550 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
  • Designed for Square Port Heads
See More

1986 GMC C2500 Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 1986 GMC C2500. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 51 different Intake Manifold Parts in our inventory ranging from $9.99 to $900.99. That means you can find the exact parts or products you need to keep that 1986 GMC C2500 running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1986 GMC C2500. ACDelco, FELPRO, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 1986 GMC C2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 359 reviews in this category, some of the top rated parts include Intake Manifold Gasket for 1958-1986 Small-Block Chevy with 3.3 stars and Intake Manifold Bolts with 4.6 stars.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1986 GMC C2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 1986 GMC C2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 GMC C2500 demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C2500 the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

Popular Edelbrock Intake Manifold Parts

We carry Edelbrock parts in our stock across Intake Manifold Gasket Sets and Intake Manifolds categories, plus more. For a 1986 GMC C2500, our most popular Edelbrock Intake Manifold Parts include:
Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy
from $47.99
(1)
Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy
Intake Manifold Gasket Sets

Top 1986 GMC C2500 Intake Manifold Parts from Felpro

Felpro products are another trusted brand when it comes to Intake Manifold Parts for your 1986 GMC C2500. Popular Felpro parts include:
Engine Intake Manifold Gasket Set
from $29.99
(46)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
INTAKE MANIFOLD GASKET SET
from $25.99
(2)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets

FAQs for 1986 GMC C2500 Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 1986 GMC C2500?

Out of 51 Intake Manifold Parts for the 1986 GMC C2500, the most popular in our inventory are:
Multi-Purpose Temperature Sensor
from $35.99
(21)
Multi-Purpose Temperature Sensor
Intake Manifold Temperature Sensors
Ultra-Seal Intake Manifold Gasket with Silicone Beading
from $31.99
(18)
Ultra-Seal Intake Manifold Gasket with Silicone Beading
Intake Manifold Gasket Sets
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets

What are the top-rated 1986 GMC C2500 Intake Manifold Parts?

Top-rated Intake Manifold Parts for your 1986 GMC C2500 based on customer reviews/ratings are:
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
from $26.99
(12)
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
“Edlebrock gasket is what I needed, they had in stock! Ordered online and picked up at the counter”
Intake Manifold Bolts
from $32.09
(5)
Intake Manifold Bolts
“Excellent product.”
Ultra Seal: Intake Gasket
from $49.49
(5)
Ultra Seal: Intake Gasket
“I bought this to replace the CV Axle because the inner boot on my old axle was flinging grease. This part was a perfect replacement for my 2008 Honda ”