1986 Ford Thunderbird Motor Oil

Essential 1986 Ford Thunderbird Motor Oil

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 1 Quart (Part No.609506)

High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 1 Quart

from

$9.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart

from

$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
  • Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

Valvoline – Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.881170)

Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 5 Quart

from

$37.99
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:
  • Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
  • Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
  • 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
  • Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.
See More

Pennzoil – Platinum 5W-20 Full Synthetic Motor Oil, 5 Quart (Part No.550038332)

Platinum 5W-20 Full Synthetic Motor Oil, 5 Quart

from

$35.99
Pennzoil Platinum full synthetic SAE 5W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:
  • Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high performance additive system
  • Helps protect against the effects of low speed pre-ignition (LSPI) in modern turbocharged engines
  • Provides better fuel economy which helps you drive an extra 550 miles per year vs a dirty engine
  • Offers unsurpassed wear protection by keeping engine parts from coming into contact
  • Delivers outstanding piston cleanliness, keeping pistons up to 50% cleaner than required by the toughest industry standards- based on Sequence IIIH engine test results
  • Specifications, Approvals and Recommendations: FCA MS-6395; Ford WSS-M2C945-B1; GM dexos1TM Gen 2
  • Exceeds the requirements of the following industry specifications: API SN PLUS, API SN-RC and all previous categories; ILSAC GF-5; ACEA A1/B1
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797976)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 1 Quart

from

$9.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.
See More

FRAM – Conventional 20W50 Engine Oil – Low-Speed Pre-Ignition Control – 5 Qt (Part No.F650-5QT)

Conventional 20W50 Engine Oil - Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – Full Synthetic 5W-30 dexos 1 Gen 3 Motor Oil: 1 Quart (Part No.F930)

Full Synthetic 5W-30 dexos 1 Gen 3 Motor Oil: 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos®1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
  • Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
  • Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
  • Fully Licensed GM dexos«1 Gen 3: This oil is a fully licensed GM dexos«1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
See More

FRAM – Conventional 5W20 Engine Oil, with Low-Speed Pre-Ignition Control 1 Quart (Part No.F610)

Conventional 5W20 Engine Oil, with Low-Speed Pre-Ignition Control 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 5 Quart (Part No.782253)

High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 5 Quart

from

$31.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
See More

Valvoline – Daily Protection 5W-30 Synthetic Blend Motor Oil, Easy Pour 5 Quart (Part No.881159)

Daily Protection 5W-30 Synthetic Blend Motor Oil, Easy Pour 5 Quart

from

$29.99
Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:
  • Extra wear protection designed to help keep automotive engine parts like new
  • Added detergents help protect against sludge and deposits
  • High quality additives resist motor oil breakdown in tough conditions
  • Low-friction formula supports strong fuel efficiency
  • Premium formulation flows easily at low temperatures reducing wear at start-up
See More

FRAM – 10W-30 High Mileage Full Synthetic Engine Oil: 1 Quart (Part No.F943)

10W-30 High Mileage Full Synthetic Engine Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Castrol – EDGE Extended Performance 5W-30 Advanced Full Synthetic Motor Oil: 5 Qt (Part No.1597B1)

EDGE Extended Performance 5W-30 Advanced Full Synthetic Motor Oil: 5 Qt

from

$41.99
Castrol EDGE Extended Performance with Fluid TITANIUM Technology, is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance. Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear.  Unlock maximum engine performance.

Product Features:
  • Extended drain interval of 20,000 miles or a full year (Whichever comes first)
  • 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
  • 6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
  • 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
See More

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil: 5 Qt (Part No.15906E)

EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil: 5 Qt

from

$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:
  • Patented phosphorus replacement technology to help extend the life of your emission system
  • 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
  • 6x better wear protection (as measured in latest sequence iva engine test)
  • 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
  • Maximum Performance: Castrol EDGE High Mileage with Fluid TITANIUM Technology is designed to provide maximum performance for high mileage cars, even in extreme temperatures.
  • Protects Catalytic Converter: Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus, protecting the catalytic converter and preserving the life of your emission system.
See More

Pennzoil – Platinum 5W-20 Full Synthetic Motor Oil, 1 Quart (Part No.550022686)

Platinum 5W-20 Full Synthetic Motor Oil, 1 Quart

from

$11.49
Pennzoil Platinum full synthetic SAE 5W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:
  • Provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
  • Pennzoil Platinum 5W-20 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
  • No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
  • Formulated to provide faster low-temperature oil flow and protection in extreme heat
  • Helps protect engines from loss of power
  • Formulated for modern turbocharged engines-GF-6, API SP/SP-Resource Conserving and all previous categories
  • Revolutionary PurePlus Technology: Engineered from Pennzoil’s patented PurePlus gas-to-liquid technology, converting pure natural gas into high-quality, full synthetic base oil.
  • Superior Purity: Contains 99.5% pure base oil with fewer impurities compared to base oils made from crude oil, ensuring optimal engine performance.
  • Advanced Additive Technology: Combines high-quality base oil with advanced additives to create one of the best formulations in the Pennzoil portfolio.
  • Meets GM’s dexos 1 Gen 2 Specifications: Licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications, suitable for modern engine technologies.
  • Complete Engine Protection: Provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines.
See More

Castrol – GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6C)

GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart

from

$10.49
Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
  • Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs
  • Engine Longevity: Castrol GTX High Mileage motor oil is specifically designed to extend the life of high mileage engines by protecting against sludge, wear, and burn-off.
  • Emission System Protection: Engineered to safeguard your emission system, this motor oil helps prevent catalytic converter failure, a common cause of ‘check engine’ lights in high mileage vehicles.
  • Synthetic Blend Composition: This 10W-30 synthetic blend motor oil offers superior performance and protection compared to conventional oils, making it ideal for high mileage engines.
  • Trusted Brand: As a leading consumer high-mileage brand, Castrol GTX High Mileage provides reliable and effective engine protection, ensuring your vehicle runs smoothly for longer.
See More

Castrol – EDGE 5W-20 High Mileage Full Synthetic Motor Oil, 1 Quart (Part No.15979D)

EDGE 5W-20 High Mileage Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 5W-20 Full Synthetic Motor Oil is specially formulated for vehicles with over 75K miles, making it the natural choice for consumers who want to extend maximum engine performance. Engineered with Fluid Titanium Technology and Phosphorus Replacement Technology, it preserves the catalytic converter and emission system. This oil offers 10X better high-temperature performance and 6X better wear protection, as measured in Seq IIIH and Seq IVA engine tests respectively, compared to API SP limits. From the makers of the No. 1 High Mileage brand, it meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, Ford WSS-M2C960-A1, WSS-M2C945-B1, and Chrysler MS 6395 requirements. Castrol EDGE OEM specification approvals and is available in grades 5W-20, 5W-30, 10W-30, and 10W-40.

Product Features:
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • From the makers of the No. 1 High Mileage brand
  • Meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, Meets Ford WSS-M2C960-A1 and WSS-M2C945 -B1, Meets engine test requirements of Chrysler MS 6395
  • Castrol EDGE offers motor oils that meet OEM specification approvals or licenses that cover over 97.3% of the US car parc.
  • Available in the following grades: 5W-20, 5W-30, 10W-30, and 10W-40
  • Try Castrol EDGE High Mileage today
  • Specially Formulated for High Mileage Vehicles: Designed for vehicles with over 75,000 miles, ensuring extended maximum engine performance.
  • Catalytic Converter and Emission System Preservation: Utilizes Phosphorus Replacement Technology to help preserve the catalytic converter and emission system.
See More

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart (Part No.881165)

Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart

from

$36.99
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
  • Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart (Part No.15980E)

GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart

from

$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:
  • Phosphorus replacement technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
  • Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
  • Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
  • Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.
See More

Mobil 1 – Extended Performance 5W-20 High Mileage Full Synthetic Motor Oil, 5 Quart (Part No.15020)

Extended Performance 5W-20 High Mileage Full Synthetic Motor Oil, 5 Quart

from

$41.99
You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-20 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (3)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:
  • Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.(1)
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Manufacturer Part Number: 123840
  • Leak Prevention: Specially formulated to help prevent leaks in engines with over 75,000 miles, ensuring your vehicle remains in top condition.
  • Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.
See More

Castrol – EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart (Part No.1598B6)

EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart

from

$37.99
Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:
  • 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
  • Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.
See More

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-20 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.849644)

Full Synthetic High Mileage with MaxLife Technology 5W-20 Engine Oil: Maximizes Engine Life, 1 Quart

from

$11.99
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:
  • Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
  • Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
  • 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
  • Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F670-5QT)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart

from

$25.99
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Protection: Suitable for domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

Castrol – GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6A)

GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart

from

$10.49
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:
  • Phosphorus replacement technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
  • Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs
See More

Castrol – GTX 10W-30 Conventional Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.15B7AA)

GTX 10W-30 Conventional Motor Oil, Helps Extend Engine Life, 5 Quart

from

$29.99
Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:
  • Superior protection against engine sludge (When tested in engines with a high level of sludge)
  • Advanced protection against viscosity and thermal breakdown
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Proven Longevity: With over 50 years of innovation and trust, Castrol GTX helps extend the life of your engine by protecting against new oil splatter formation better than tough industry standards.
  • Adaptable to Severe Conditions: Designed to perform under severe driving conditions such as heavy traffic, poor fuel quality, and harsh driving environments, ensuring your engine remains powerful and reliable.
  • Premium Conventional Oil: As a premium conventional motor oil, Castrol GTX meets the needs of both consumers and vehicle manufacturers, providing reliable performance and protection.
  • Optimal Viscosity: Featuring an SAE oil weight of 10W-30, Castrol GTX offers optimal viscosity for a wide range of temperatures, ensuring smooth engine operation and protection.
See More

Mobil 1 – Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart (Part No.14977)

Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart

from

$41.99
If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 5W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.(2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending Feb 25, 2023)

Product Features:
  • Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Manufacturer Part Number: 120766
  • Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.
See More

1986 Ford Thunderbird Motor Oil

Maybe you’re in the middle of a full rebuild of that 1986 Ford Thunderbird. Maybe you just need a couple of Motor Oil. Either way, Advance Auto Parts has 27 different Motor Oil in our inventory ranging from $6.49 to $41.99. That means you can find the exact parts or products you need to keep that 1986 Ford Thunderbird running smoothly.

Motor Oil are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Ford Thunderbird. Castrol, Mobil Oil, and Fram are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Motor Oil for your 1986 Ford Thunderbird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 19,865 reviews in this category, some of the top rated parts include Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart with 4.9 stars and 10W-30 Conventional Motor Oil, Reduces Engine Wear and Sludge, 5 Quart with 4.8 stars.

So if you’re in the market for aftermarket Motor Oil to keep your 1986 Ford Thunderbird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Motor Oil Brands To Make Your 1986 Ford Thunderbird Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Ford Thunderbird demands trusted brand parts and products to keep it running. Many trusted brands of Motor Oil make up Advance Auto Parts’ inventory, and all are ready to help make your Thunderbird the best it can be. Be sure to browse some of our top Motor Oil brands and parts.

FAQs for 1986 Ford Thunderbird Motor Oil

What are the most purchased Motor Oil for the 1986 Ford Thunderbird?

Out of 27 Motor Oil for the 1986 Ford Thunderbird, the most popular in our inventory are:
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
from $27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control
from $25.99
This product is not rated
5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control
Engine Oil

What are the top-rated 1986 Ford Thunderbird Motor Oil?

Top-rated Motor Oil for your 1986 Ford Thunderbird based on customer reviews/ratings are:
10W-30 Conventional Motor Oil, Reduces Engine Wear and Sludge, 5 Quart
from $27.99
(478)
10W-30 Conventional Motor Oil, Reduces Engine Wear and Sludge, 5 Quart
“This is by far a great product for any automobile.”
Full Synthetic 10W-30 Motor Oil 5 Quart
from $35.99
(456)
Full Synthetic 10W-30 Motor Oil 5 Quart
“I love Quaker state oil. The best product in oil The best price ever You can find it everywhere”