1986 Ford F-150 Pickup Air Intakes
More 1986 Ford F-150 Pickup Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 1986 Ford F-150 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 1986 Ford F-150 Pickup Air Intakes
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60845)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98010 T-1)
from
$121.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)
from
$13.99
The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 56 Maximum Jet Size
- 0.055 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
Edelbrock – Standard Flow Carburetor Power Valve #12645 Single Stage 4.5in Hg (Part No.12645)
from
$16.99
Product Features:
See More
- The Edelbrock #12645 Single Stage 4.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
- During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)
from
$62.99
Product Features:
See More
- Customize Carburetor Calibration and Performance
- Owners Manual has Assembly Help
- Includes Metering Rod Retaining Spring
- Includes Metering Rods
- Includes Metering Jets
- Includes Step-Up Springs
Edelbrock – Performer RPM Small Block Ford Intake Manifold (Part No.7181)
from
$396.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Retains Good Throttle Response and Acceleration
- Excellent Top End Power
Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
from
$43.99
Product Features:
See More
- The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
- The kit comes with the necessary components to rebuild a 4160 style Carburetor.
Felpro – Carburetor Mounting Gasket (Part No.60359)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Air Cleaner Mounting Gasket (Part No.60038)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish (Part No.1483)
from
$38.99
Product Features:
See More
- Converts Throttle Lever on Carb for Proper Use
- For Edelbrock Performer Series Carburetors Only
- Also Accepts Cruise Control
- Use with Appropriate Throttle Cable Plate
Carquest – Air Charge Temperature Sensor (Part No.31A1019)
from
$22.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)
from
$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly
Product Features:
See More
Product Features:
- Multi-Color
- Plastic Material
- Fits Holley® 2300, 4150, And 4160 Carburetors
- Set of 8
- Made In The USA
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Dorman – Help – Pedal And Shift Linkage Bushing Assortment (Part No.14041)
from
$11.29
These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
- Conveniently fix- simple solution to address worn bushings and restore original performance and feel
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dorman – Help – Air Cleaner Hold-Down Clamp Assortment (Part No.41101)
from
$14.29
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.362660.1)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1221)
from
$43.99
Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.
Product Features:
See More
Product Features:
- Stamped From 18-Gauge Steel
- Triple-Chrome Plated
- High-Quality Finish
- Great Looks
- Works With All 5.125 in. Carbs
- Base Knock-Outs For Use w/Crankcase Ventilation
Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)
from
$24.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
Product Features:
See More
Product Features:
- Steel Material
- For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
- Includes Lightest To Heavy
- Set of 7
- Made in The USA
Edelbrock – Performer Carburetor #9905 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
United Carb – Remanufactured Carburetor 1 Barrel (Part No.7-7765)
from
$369.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Edelbrock – Carburetor Throttle Cable Bracket #1491 For Ford Small-Block 351 Windsor (Part No.1491)
from
$22.99Product Features:
- Repositions Stock Throttle Cable Bracket
- Use With PN[1483]
- Use w/Stock Throttle Cable Bracket
- For Fords w/Cable Activated Throttles
- Fords w/Automatic Transmission Kickdown Rod
NTK – Throttle Position Sensor (Part No.TH0131)
from
$49.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
Carquest Premium – Throttle Sensor (Part No.ECC1426)
from
$76.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)
from
$12.99
Product Features:
See More
- The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
- Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)
from
$181.99Product Features:
- Fiber Laminate Spacers
- Provide Heat Insulation Between Upper and Lower
- Creates Cooler/Denser Charge
- Raise Intake 0.5in. For More Valve Cover Clearance
- Includes all Necessary Hardware for Installation
Popular 1986 Ford F-150 Pickup Air Intakes Categories
1986 Ford F-150 Pickup Air Intakes
You count on your 1986 Ford F-150 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 61 Air Intakes ranging in price from $2.29 to $1,796.99, you’re sure to find everything you need for your 1986 Ford F-150 Pickup.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 10 different brands like Felpro, Carquest Premium, and Edelbrock. 1986 Ford F-150 Pickup Air Intakes start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 223 extensive product reviews on 1986 Ford F-150 Pickup Air Intakes. Some of the top-rated Air Intakes products we carry are Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg with 4.5 stars and Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange) with 4.9 stars.
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1986 Ford F-150 Pickup below to get started!
Top-Rated Air Intakes Brands For Your 1986 Ford F-150 Pickup
Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Ford F-150 Pickup running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Edelbrock, and even more.
Popular Holley Air Intakes
You’ll find popular Holley brand products across Intake Manifold Parts. All are waiting to get your 1986 Ford F-150 Pickup back on the road. Some of the top-rated Holley products in these categories are:
Top-Rated Felpro Air Intakes
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Air Intakes for your 1986 Ford F-150 Pickup, and some of our most reviewed Felpro parts include:
FAQs for 1986 Ford F-150 Pickup Air Intakes
What are the most purchased Air Intakes for the 1986 Ford F-150 Pickup?
Out of 61 Air Intakes for the 1986 Ford F-150 Pickup, the most popular in our inventory are:
from
$11.29
(21)
Pedal And Shift Linkage Bushing Assortment
Throttle Body Valve Rod Retainer Bushings
from
$43.99
(19)
Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
Air Cleaner Assemblies
What are the top-rated 1986 Ford F-150 Pickup Air Intakes?
Top-rated Air Intakes for your 1986 Ford F-150 Pickup based on customer reviews/ratings are:
from
$16.99
(27)
Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg
“Works perfectly”
from
$47.99
(9)
Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
“I like the look of the matte black air cleaner cover. Now just need to dress up the rest of the engine to match”
from
$451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
