1986 Ford E-350 Econoline Performance and Racing Products

Essential 1986 Ford E-350 Econoline Performance and Racing Products

Energy Suspension – Sway Bar Bushing Set (Part No.4.5125R)

Sway Bar Bushing Set

from

$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

MSD Ignition – Distributor; Ford 302; Pro-Billet; Small Cap (Part No.8579)

Distributor; Ford 302; Pro-Billet; Small Cap

from

$399.99
MSD engineers fit all of their high performance distributor experience into a special compact housing designed to be less obtrusive for Ford engines. The diameter of the special cap and housing are 5/8 inch smaller than stock Ford distributors providing extra room in front of the engine. The new MSD cap features spark plug style terminals and is firmly screwed down to the housing. The distributor relies on MSD’s race proven magnetic pick-up and precision reluctor to deliver accurate trigger signals to the MSD ignition throughout high rpm. The reluctor assembly is turned by a hardened steel shaft which rides in a sealed ball bearing for high rpm stability and endurance. Mounted to the top of this shaft is a fully adjustable mechanical advance assembly. The rate at which the chromoly assembly advances the timing is easily controlled by changing the supplied advance springs and stop bushing for total advance.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/small dia. cap w/HEI style terminals; race and rotor
  • Will accept PN[8441] Cap-A-Dapt
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

Edelbrock – VALVE COVERS (Part No.4260)

VALVE COVERS

from

$144.99
Product Features:
  • Polished Finish
  • Raised Fins w/Black Mat Background
  • Detailed With Allen Hex Heads
  • 2 Piece Look; 1 Piece Construction
  • Clears Most Roller Rockers
  • Clears Valvetrain Components
  • Heavy Gauge
See More

Accel – Rotor (Part No.130224)

Rotor

from

$17.88
Regain horsepower and economy for your street machine with a new ACCEL performance rotor. ACCEL’s high quality manufacturing process results in rotors offering superior protection from arc-thru and crossfire.

Product Features:
  • Racing Distributor Rotor
  • Standard Height Rotor
See More

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)

Performer 289 Intake Manifold for Small-Block Ford, Black Finish

from

$442.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Mr. Gasket – Water Neck (Part No.2662)

Water Neck

from

$19.99
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.

Product Features:
  • Chrome Plated
  • This Is A 45 Degree Neck
  • Comes With O-ring And Bolts
  • Has Small Hose Fitting On It
See More

MSD Ignition – Wire Set; Black Super Conductor; Ford 351C-460 with HEI Cap (Part No.35383)

Wire Set; Black Super Conductor; Ford 351C-460 with HEI Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1619)

Engine Valve Cover Gasket Set

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)

Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions

from

$28.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)

Shift Improver Kit, 67-91 C6 Transmission

from

$67.99
The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

MSD Ignition – Harness; MSD 6 to Ford TFI (Part No.8874)

Harness; MSD 6 to Ford TFI

from

$54.39
MSD Ignition control are easy to install, but we also offer several plug-in harnesses. These are especially handy for quick installation on late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD. Two wires go from the MSD to the battery and you’re done with no cutting or splicing!

Product Features:
  • Splice free installation
  • Plugs directly into factory coil
See More

Edelbrock – Pushrod Set for Ford 351W (Part No.9659)

Pushrod Set for Ford 351W

from

$190.99
Edelbrock part #9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise f

Product Features:
  • 7.7 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

B & M – Automatic Shifter, Sport Shifter (Part No.80776)

Automatic Shifter, Sport Shifter

from

$329.99
The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.

Product Features:
  • Base Trims For Custom Fit
  • Neutral Safety Switch
  • Backup Light Switch
  • Lighted Gear Indicator
  • Black T-Handle and Cable
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)

PERFORMANCE OIL PAN GASKET SET

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Competition Cams – Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud (Part No.19043-16)

Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Ford 289-351W w/ 3/8" Stud

from

$427.99
These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Ford V8 289-302-351W applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.

Product Features:
  • CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
  • Designed for high performance street and race engines
  • Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
  • Additional clearance, up to 1.650″ O.D. valve spring
See More

Accel – Distributor Cap And Rotor Kit (Part No.8220)

Distributor Cap And Rotor Kit

from

$64.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

Super Intake Manifold Bolts

from

$43.99
Super Intake Manifold Bolts

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2948)

Engine Crankshaft Seal Kit

from

$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Starter; Small Block Ford 289; 302; 351W 5.0L (Part No.5090)

Starter; Small Block Ford 289; 302; 351W 5.0L

from

$438.99
Our advanced power system line has grown to include starters. Our new APS starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The APS starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans, but just in case, we made the billet mount so it can be clocked in different positions to help in tight applications. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.

Product Features:
  • Mount Can Be Clocked To Assist In Mounting
  • Downsized design helps clearance issues w/oil pans and exhaust
  • Ball bearing supported armature and pinion gear
  • 3 Hp Motor Provides Power For High Compression Engines
  • Gear reduction of 4.4:1 improves torque for great cranking
See More

Hooker Headers – Competition Header (Part No.6910HKR)

Competition Header

from

$391.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

VALVE SPRINGS, 1.509" DUAL 1 ST

from

$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
  • O.D.: 1.509″, I.D.: 0.697″
  • Dual valve springs with damper
See More

B & M – Torque Converter, Tork Master 2000 (Part No.40427)

Torque Converter, Tork Master 2000

from

$349.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Monroe – Magnum Steering Damper Kit (Part No.SA1930)

Magnum Steering Damper Kit

from

$132.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Richmond Gear – Differential Ring And Pinion (Part No.69-0057-1)

Differential Ring And Pinion

from

$379.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Popular 1986 Ford E-350 Econoline Performance and Racing Products Categories

1986 Ford E-350 Econoline Performance and Racing Products

You count on your 1986 Ford E-350 Econoline to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 140 Performance and Racing Products ranging in price from $13.29 to $1,035.99, you’re sure to find everything you need for your 1986 Ford E-350 Econoline.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 18 different brands like Accel, MSD Ignition, and Mr. Gasket. 1986 Ford E-350 Econoline Performance and Racing Products start as low as $13.29!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,590 extensive product reviews on 1986 Ford E-350 Econoline Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Coil; Street Fire; Ford TFI with 4.3 stars and Water Neck with 3.8 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1986 Ford E-350 Econoline below to get started!

Top-Rated Performance and Racing Products Brands For Your 1986 Ford E-350 Econoline

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Ford E-350 Econoline running right for years to come. In our inventory you’ll find brands like Accel, MSD Ignition, Mr. Gasket, and even more.

Popular Weiand Performance and Racing Products

You’ll find popular Weiand brand products across Performance Engines. All are waiting to get your 1986 Ford E-350 Econoline back on the road. Some of the top-rated Weiand products in these categories are:
High-Rise Dual Plane Intake Manifold for Maximum Torque
from $359.99
(1)
High-Rise Dual Plane Intake Manifold for Maximum Torque
Performance Intake Manifolds

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1986 Ford E-350 Econoline, and some of our most reviewed Edelbrock parts include:

FAQs for 1986 Ford E-350 Econoline Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1986 Ford E-350 Econoline?

Out of 140 Performance and Racing Products for the 1986 Ford E-350 Econoline, the most popular in our inventory are:
Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95
from $52.99
(48)
Distributor Cap and Rotor Kit; MSD/Ford V8; 85-95
Performance Distributor Cap and Rotor Kits
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1986 Ford E-350 Econoline Performance and Racing Products?

Top-rated Performance and Racing Products for your 1986 Ford E-350 Econoline based on customer reviews/ratings are:
Coil; Street Fire; Ford TFI
from $65.99
(12)
Coil; Street Fire; Ford TFI
“this product worked great, i installed it on a 300ci ford and gained 2-3 horsepower, and about 1.5 miles per gallon. it is definitely a great coil at ”
Water Neck
from $19.99
(12)
Water Neck
“FINALLY… first time not having to re-do flimsy paper gaskets. Aside from thicker cork gasket, O ring is only way to go !”