1986 Ford E-350 Econoline Differentials

Essential 1986 Ford E-350 Econoline Differentials

Yukon Gear – Replacement Inner Slinger For Dana 70 (Part No.33013)

Replacement Inner Slinger For Dana 70

from

$6.99
Product Features:
  • Inner slinger
  • Fits Dana Spicer 70
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

USA Standard Gear – Bearing Kit For Dana 70HD & Super-70 (Part No.58002)

Bearing Kit For Dana 70HD & Super-70

from

$384.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Dana Spicer 70HD
  • Fits Dana Spicer Super 70
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Bearing Race Driver (Part No.56014)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88510 race
  • All steel construction
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Ring Gear Bolt For Ford 10.25" & 10.5"

from

$6.99
Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:
  • Ring gear bolt for Ford 10.25″ and 10.5″
  • 1/2″ x 20 thread
See More

USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)

Master Overhaul Kit Dana 60 Front

from

$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 60 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For ’10 & Down Ford 10.5" In A 3.73 Ratio (Part No.24332)

High Performance Ring & Pinion Gear Set For '10 & Down Ford 10.5" In A 3.73 Ratio

from

$549.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits 1999-2010 Ford 10.5″
  • 10.50″ ring gear diameter
  • 31 spline pinion
  • 12 ring gear bolts
  • 3.73 ratio
See More

Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

Dana 70 & Dana 80 Pinion Gear Thrust Washer

from

$7.99
Dana 70 & Dana 80 pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 70 and 80
See More

Yukon Gear – Differential (Part No.26037)

Differential

from

$854.99
Differential

Yukon Gear – Chrome Replacement Cover For Dana 60 And 61 Standard Rotation (Part No.32005)

Chrome Replacement Cover For Dana 60 And 61 Standard Rotation

from

$89.99
Chrome replacement cover for Dana 60 and 61(not reverse rotation!).

Product Features:
  • Fits standard rotation Dana Spicer 60
  • Chrome
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline (Part No.28004)

Grizzly Locker For Dana 60, 4.56 & Up, 30 Spline

from

$1204.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55024)

Replacement Pinion Depth Shims For Dana 80

from

$79.99
Product Features:
  • Pinion depth shim kit
  • Fits Dana Spicer 80 4.125″ design
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber)

from

$181.99
Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction
See More

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Replacement Crush Sleeve For Dana 60

from

$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:
  • Crush sleeve for Dana Spicer 60
  • 0.660″ tall
See More

Yukon Gear – Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles (Part No.16085)

Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles

from

$301.99
Yukon standard open spider gear replacement kit for Dana 60 and 61 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 60 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings

from

$78.99
Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:
  • Seal housing for Ford 10.25″ and 10.5″
  • Includes o-rings
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Yukon Gear – Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.34023)

Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Super Carrier Shim Kit For Ford 10.25" (Part No.55004)

Super Carrier Shim Kit For Ford 10.25"

from

$48.99
10.25″ Ford carrier Supershims.

Product Features:
  • Super carrier shim kit for Ford 10.25″ and 10.5″
  • Interlocking design makes installation much easier
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Standard Open Side Gear And Thruster Washer For 10.25" Ford (Part No.33293)

Standard Open Side Gear And Thruster Washer For 10.25" Ford

from

$11.99
55P Chevy Passenger Drop Out gasket.

Product Features:
  • Side gear thrust washer
  • Fits Ford 10.25″
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$271.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • U-bolt style
See More

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Ppinion Nut 7/8-20 Thread, 1 1/8 Socket

from

$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:
  • Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
  • 7/8″ x 20 thread
  • 1 1/8″ socket
See More

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Zip Locker Soleniod Valve

from

$99.99
Zip Locker soleniod valve.

Product Features:
  • Solenoid valve
See More

1986 Ford E-350 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 1986 Ford E-350 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 311 different Differentials in our inventory ranging from $2.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1986 Ford E-350 Econoline running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Ford E-350 Econoline. Yukon Gear, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1986 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 284 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Tapered Cone Wheel Bearing Assembly with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1986 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1986 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Bearings and Rear Differential Pinion Bearings categories, plus more. For a 1986 Ford E-350 Econoline, our most popular National Differentials include:
Bearings
from $22.99
(3)
Bearings
Differential Bearings
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings

FAQs for 1986 Ford E-350 Econoline Differentials

What are the most purchased Differentials for the 1986 Ford E-350 Econoline?

Out of 311 Differentials for the 1986 Ford E-350 Econoline, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Rear Differential Cover
from $63.99
This product is not rated
Rear Differential Cover
Differential Covers
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
Differential Bearings

What are the top-rated 1986 Ford E-350 Econoline Differentials?

Top-rated Differentials for your 1986 Ford E-350 Econoline based on customer reviews/ratings are:
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Tapered Cone Wheel Bearing Assembly
from $16.99
(2)
Tapered Cone Wheel Bearing Assembly
“Worked sell”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”