1986 Ford E-150 Econoline Clutch Systems
More 1986 Ford E-150 Econoline Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1986 Ford E-150 Econoline, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1986 Ford E-150 Econoline Clutch Systems
LuK – Clutch Master Cylinder (Part No.LMC168)
from
$73.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-506)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Driveworks – Clutch Release Bearing (Part No.S-614034)
from
$23.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Clutch Release Bearing (Part No.S-614061)
from
$31.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
LUK – Clutch Slave Cylinder (Part No.I3010836229LUK)
from
$114.24
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC002B)
from
$75.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ARP Auto Racing – For Use With 1986-1995 302/351W Ford V8, 8Mm X 1.25, 180000Psi Tensile, Hex Head (Part No.150-2202)
from
$20.79
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65662)
ATP – AT CLUTCH PLATE (Part No.FC-105)
from
$7.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.FC-4)
from
$13.99
AT CLUTCH PLATE
LuK – OE Quality Flywheel (Part No.LFW132)
from
$87.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
ATP – Automatic Transmission Flex Plate (Part No.Z-105)
from
$66.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Richmond Gear – Differential Cross Shaft (Part No.CSPF88L)
from
$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
ATP – CLUTCH FORK (Part No.ZA-110)
from
$35.99
CLUTCH FORK
LuK – Clutch Kit: 11" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-128)
from
$139.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Carquest Premium – New Clutch Set (Part No.MU30-1A)
from
$135.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
LuK – Clutch Kit: 10" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-056)
from
$145.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
ARP Auto Racing – 1 In Under Head Length, 10 Mm X 1.0 Thread Strength, Black Oxide, Chrome Moly (Part No.254-2801)
from
$49.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. that is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- 1-PC Rear Main Seal
- M10 X 1.0 Thread Size
Dorman – Flywheel Bolt (Part No.I1005831588DOR)
from
$13.87
Flywheel Bolt
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Lakewood – Safety Bellhousing (Part No.15200)
from
$795.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
Popular 1986 Ford E-150 Econoline Clutch Systems Categories
1986 Ford E-150 Econoline Clutch Systems
You count on your 1986 Ford E-150 Econoline to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 46 Clutch Systems ranging in price from $3.99 to $795.99, you’re sure to find everything you need for your 1986 Ford E-150 Econoline.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 12 different brands like Dorman, LuK, and DriveWorks. 1986 Ford E-150 Econoline Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 393 extensive product reviews on 1986 Ford E-150 Econoline Clutch Systems. Some of the top-rated Clutch Systems products we carry are ATP Automatic Transmission Flex Plate with 3.0 stars and Clutch Release Bearing with 2.3 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1986 Ford E-150 Econoline below to get started!
Top-Rated Clutch Systems Brands For Your 1986 Ford E-150 Econoline
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Ford E-150 Econoline running right for years to come. In our inventory you’ll find brands like Dorman, LuK, DriveWorks, and even more.
Popular Carquest Premium Clutch Systems
You’ll find popular Carquest Premium brand products across Clutch Kits and Clutch Slave Cylinders. All are waiting to get your 1986 Ford E-150 Econoline back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated National Clutch Systems
If National are what you’re looking for, our inventory holds plenty. We stock National brand Clutch Systems for your 1986 Ford E-150 Econoline, and some of our most reviewed National parts include:
FAQs for 1986 Ford E-150 Econoline Clutch Systems
What are the most purchased Clutch Systems for the 1986 Ford E-150 Econoline?
Out of 46 Clutch Systems for the 1986 Ford E-150 Econoline, the most popular in our inventory are:
What are the top-rated 1986 Ford E-150 Econoline Clutch Systems?
Top-rated Clutch Systems for your 1986 Ford E-150 Econoline based on customer reviews/ratings are:
from
$72.99
(3)
ATP Automatic Transmission Flex Plate
“Atp, is a good product. And again it’s even better with the online discounts.”
from
$15.49
(3)
Clutch Release Bearing
“Great fit nice quality part. I replaced this during clutch repair.”
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
“Right part”
